Part Description: 2001 GMC Yukon XL 1500 Balancer Asm-Crankshaft
More Info
Vehicle Fitment
2001 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Harmonic Balancer Repair
Q: What should be noticed while removing the crankshaft balancer?
A:
You shall make sure that the teeth of the J 42386-A mesh with the teeth of the engine flywheel. The crankshaft balancer is balanced as an individual component. It is not necessary to mark the balancer before removal.
By Bob
GM Specialist
01/11/2022
Q: What kind of tools will be required in the replacement of the crankshaft balancer?
A:
The tools required include J 41816 Crankshaft Balancer Remover, J 41816-2 Crankshaft End Protector, J 42386-A Flywheel Holding Tool, J 41665 Crankshaft Balancer, and Sprocket Installer, and J 36660-A Torque Angle Meter.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the drive belt idler pulley?
A:
The procedure is to loosen the drive belt Idler Pulley bolt, and remove the accessory drive belt, the drive belt idler pulley, and the bolt.
Q: How to remove the drive belt tensioner-air conditioning?
A:
The proper way is to remove the air conditioning (A/C) drive belt, the A/C Belt Tensioner bolts, and the A/C belt tensioner.
Q: What is the removal procedure for the camshaft?
A:
The procedure is to remove the radiator support, the timing chain and Camshaft sprocket, the valve lifters, the camshaft sensor bolt and sensor, the camshaft retainer bolts and retainer, and the camshaft.