< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Astro
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2001 Chevrolet Astro
PartNumber: 130.66034Product Specifications- UPC: 805890009931
- Part Description: 2001 Chevrolet Astro Premium Brake Master Cylinder
Vehicle Fitment- 2001 Chevrolet Astro | All Trims | All Engines
$121.30
OEM (Genuine) 2001 Chevrolet Astro Cylinder Asm, Brake Master
PartNumber: 18047594
Product Specifications- Notes: 1996-05
- Other Names: Master Cylinder
- Item Dimensions: 8.4 x 6.1 x 12.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18029952
- Part Description: 2001 Chevrolet Astro Cylinder Asm, Brake Master
Vehicle Fitment- 2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2001 Chevrolet Astro
PartNumber: 10-2779Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.25"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 9/16 x 18
- UPC: 082617404884
- Part Description: 2001 Chevrolet Astro Remanufactured Master Cylinder
Vehicle Fitment- 2001 Chevrolet Astro | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: How to install the master cylinder reservoir?
A:
After inspecting the reservoir for cracks or deformation, you need to clean the reservoir and dry the reservoir. After that, you can lubricate the new seals and the outer surface area and install the lubricated seals. Next, you can install the reservoir, the diaphragm, and the cover on the reservoir. After removing the master cylinder from the vice, you can install the master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to install the master cylinder?
A:
After benching bleed the master cylinder, you can install the master cylinder, the combination valve bracket, and the master cylinder bolts and nuts. Then you can connect the brake pipes to the master cylinder and bleed the hydraulic brake system.
By Bob
GM Specialist
01/11/2022Q: How to remove the master cylinder?
A:
You need to apply the parking brake and block the wheels. Then you can disconnect the brake pipes from the master cylinder, plug the open brake pipe ends, and remove the master cylinder nuts and bolts. After removing the combination valve bracket, you can remove the master cylinder and drain the master cylinder of all brake fluid.
By Bob
GM Specialist
01/11/2022Q: How to install the brake master cylinder?
A:
You need to clean the interior and exterior of the master cylinder, the secondary piston, and the return spring. Then you can dry the master cylinder and the individual components, lubricate the master cylinder bore, the secondary piston, the return spring, and the individual overhaul components, and assemble the seal, the retainer, and the new secondary seal. Then you can install the lubricated return spring, the secondary piston assembly, and the lubricated and new primary piston assembly. After that, you need to depress the primary piston and install the new piston retainer. Then you can install the master cylinder reservoir, the reservoir cap, the diaphragm, and the master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to remove the brake master cylinder?
A:
After removing the brake master cylinder, you need to clean the outside of the master cylinder reservoir, remove the reservoir cap and diaphragm, and inspect the reservoir cap and diaphragm for damage. After that, you can remove the primary piston assembly, and plug the cylinder inlet ports and the rear outlet port. Then you can discard the primary piston assembly, the piston retainer, and the seals and seal retainer from the secondary piston.
By Bob
GM Specialist
01/11/2022Q: How to bleed the master cylinder bench?
A:
You need to secure the mounting flange of the brake master cylinder, remove the master cylinder reservoir cap, and diaphragm, and install suitable fittings. Then you need to install transparent hoses and fill the master cylinder reservoir. Then you need to release the primary piston, remove the transparent hoses, and install the master cylinder reservoir cap and diaphragm. Then you can remove the fittings and the master cylinder from the vise.
By Bob
GM Specialist
01/11/2022Q: How to remove the master cylinder reservoir?
A:
You need to remove the master cylinder, secure the master cylinder in a vise, and tap out the reservoir retaining pins. Then you need to remove the reservoir and the seals from the master cylinder.
By Bob
GM Specialist
01/11/2022See more FAQs (2)