2000 Chevrolet Monte Carlo Tie Rod End

The procedure is to raise the vehicle, remove the tire and wheel assembly, remove the prevailing torque nut, loosen the jam nut, remove the outer tie rod assembly from the steering knuckle and remove the outer tie rod assembly from the inner tie rod assembly.

You can raise the vehicle, remove the tire and wheel assembly, remove the outer tie rod, remove the inner tie rod jam nut, remove the clamp, remove the inner tie rod boot clamp, discard the inner tie rod boot clamp and remove the inner tie rod boot and the breather tube.

The procedure is to install the new inner tie rod boot clamp, apply grease to the inner tie rod assembly and the power steering gear assembly, install the inner tie rod boot onto the inner tie rod assembly, align the breather tube with the mark, install the inner tie rod boot onto the power steering gear assembly, install the inner tie rod boot onto the inner tie rod assembly, install the inner tie rod boot clamp on the inner tie rod boot, install the inner tie rod small boot clamp, install the inner tie rod jam nut, install the outer tie rod, install the tire and wheel assembly, lower the vehicle and perform a front end alignment.

You can install the outer tie rod assembly to the inner tie rod assembly, install the outer tie rod assembly to the steering knuckle, install the prevailing nut, tighten the jam nut, install tire and wheel assembly, lower the vehicle and perform a front-end alignment.