2000 Chevrolet Monte Carlo Sway Bar Link

You can install the front cable, connect the cable to the parking brake, install the cable button and the cable button assurance clip, raise the vehicle, tighten the nut on the equalizer, lower the vehicle, install the Parking Brake Cable through the park brake cable guides, position the carpeting properly, install the lower center pillar trim panel, the left side carpet retainers and the left side instrument panel insulator and adjust the parking brake.

You can raise the vehicle, remove the tire and wheel assembly, place the drain pan under the vehicle, remove the power steering return hose from the power steering gear cooler pipe, remove the power steering return hose from the power steering pump, remove the power steering return hose from the power steering gear, remove the power steering return hose from the Power Steering Hose retainer and remove the power steering return hose from the power steering gear cooler pipe.

The procedure is to raise the vehicle, remove the tire and wheel assembly, remove the front wheel drive shaft bearing, remove the front lower control arm ball stud-to-knuckle cotter pin and nut, separate the front lower control arm stud from the front Steering Knuckle, remove the outer tie rod end, scribe the strut to the knuckle, remove the bolts and remove the knuckle.