2000 Chevrolet Monte Carlo Ball Joint

The procedure is to remove the left side instrument panel insulator, the left side carpet retainers, and the lower center pillar trim panel, fold back the carpeting, remove the Parking Brake Cable from the park brake cable guides, raise the vehicle, remove the parking brake cable at the equalizer, lower the vehicle, remove the cable button end and remove the front cable.

You can raise the vehicle, remove the tire and wheel assembly, place the drain pan under the vehicle, remove the power steering return hose from the power steering gear cooler pipe, remove the power steering return hose from the power steering pump, remove the power steering return hose from the power steering gear, remove the power steering return hose from the Power Steering Hose retainer and remove the power steering return hose from the power steering gear cooler pipe.

The procedure is to raise the vehicle, remove the tire and wheel assembly, remove the front wheel drive shaft bearing, remove the front lower control arm ball stud-to-knuckle cotter pin and nut, separate the front lower control arm stud from the front Steering Knuckle, remove the outer tie rod end, scribe the strut to the knuckle, remove the bolts and remove the knuckle.