Other Names: Air Mass Sensor, Mass Air Flow Sensor
Item Dimensions: 5.2 x 5.1 x 11.4 inches
Item Weight: 2.20 Pounds
Fitment Type: Direct Replacement
Replaces: 19207203, 25008308, 25008307, 25179711
Part Description: 2000 Chevrolet K3500 Sensor Kit, Mass Airflow
More Info
Vehicle Fitment
2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Mass Air Flow Sensor Repair
Q: How to remove the mass airflow (MAF) sensor?
A:
You shall disconnect the negative battery cable and the mass air flow (MAF) sensor harness connector, and remove the intake air resonator retaining wingnut, the intake air resonator from the throttle body, and the MAF sensor.
By Bob
GM Specialist
01/11/2022
Q: How to install the mass air flow (MAF) sensor?
A:
The proper way is to attach the MAF sensor to the intake air resonator and air cleaner cover, connect the MAF sensor harness connector, install the intake air resonator retaining wingnut, and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the throttle cable/linkage?
A:
You should install the accelerator cable to the dash panel, to the accelerator pedal, to the cable routing bracket, to the accelerator cable bracket, and the Throttle Body lever.
Q: How to remove the manifold absolute pressure (MAP) sensor?
A:
You shall disconnect the negative battery cable and the MAP Sensor harness connector, and remove the MAP sensor by pulling straight up with a slight rocking motion, and the MAP sensor grommet.
Q: How to remove the intake manifold-lower?
A:
You shall remove the upper radiator hose, both heater hoses, the water pump inlet hose, the distributor, the drive belt, the PCV valve, the power steering bracket, the valve rocker arm covers, and the Intake Manifold.