Part Description: 2000 Chevrolet K3500 Sensor, Map
More Info
Vehicle Fitment
2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 6.5 L DIESEL
FAQ for MAP Sensor Repair
Q: How to remove the manifold absolute pressure (MAP) sensor?
A:
You shall disconnect the negative battery cable and the MAP sensor harness connector, and remove the MAP sensor by pulling straight up with a slight rocking motion, and the MAP sensor grommet.
By Bob
GM Specialist
01/11/2022
Q: How to install the manifold absolute pressure (MAP) sensor?
A:
The proper way is to install a new MAP sensor grommet on the MAP sensor, and the MAP sensor, and connect the MAP sensor harness connector and the negative battery cable.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the throttle cable/linkage?
A:
You should install the accelerator cable to the dash panel, to the accelerator pedal, to the cable routing bracket, to the accelerator cable bracket, and the Throttle Body lever.
Q: How to remove the intake manifold-lower?
A:
You shall remove the upper radiator hose, both heater hoses, the water pump inlet hose, the distributor, the drive belt, the PCV valve, the power steering bracket, the valve rocker arm covers, and the Intake Manifold.
Q: How to install the air filter element?
A:
You shall insert the air cleaner element into the air cleaner base, and install the air cleaner cover and the air cleaner cover clips.