2000 Chevrolet Blazer Window Channel

You need to close the window and insert the J 9886-01 between the handle and the bearing plate. Then you need to align the J 9886-01 with the handle. After that, you need to push the J 9886-01 to disengage the clip and pull the handle from the door. Finally, you need to remove the window regulator handle from the door, then you can remove the bearing plate from the door.

You need to install the bearing plate on the door and install the window regulator handle on the door. Then you need to install the retaining clip to the handle. After that, you need to insert the handle onto the window regulator shaft. Finally, you need to push on the handle until the clip engages on the shaft.

The recommended torque is 10 N.m (88 lb in).

You need to prepare a J 9886-01 Door Handle Clip Remover.

You need to remove the door trim panel, the water deflector, and the bolts that retain the front run channel to the door. Then you need to disengage the run channel from the window weatherstrip and remove the front run channel from the door. After that, you need to slide the window forward and remove the bolts that retain the rear run channel to the door. Finally, you need to disengage the run channel from the window weatherstrip, then you can remove the rear run channel from the door.