2000 Chevrolet Blazer Window Regulator

You need to connect the electrical connector to the switch. Then you need to install the power Window Switch to the trim panel by pressing down, and you need to ensure that the retainers lock into place.

You need to close the window and insert the J 9886-01 between the handle and the bearing plate. Then you need to align the J 9886-01 with the handle. After that, you need to push the J 9886-01 to disengage the clip and pull the handle from the door. Finally, you need to remove the window regulator handle from the door, then you can remove the bearing plate from the door.

You need to remove the nut and the bolt that was used.