2000 Chevrolet Blazer Mirror Switch

You need to disconnect the battery and raise and support the vehicle. Then you need to remove the differential carrier shield mounting bolts, the differential carrier shield, and the Starter mounting bolts. After that, you need to disconnect the wires from the solenoid. Finally, you can remove the starter from the vehicle.

You need to remove the left instrument panel sound insulator and the lower instrument panel sound insulator. Then you need to disconnect the electrical connectors from the Body Control Module. Finally, you can bend the 2 snap retainers back slightly and pull the body control module from the bracket at an angle.

You need to disconnect the battery negative cable, the cruise control cable, and the electrical connector. Then you need to remove the 3 nuts that retain the Cruise Control Module to the mounting bracket studs. After that, you need to remove the cruise control module from the mounting bracket. Finally, you need to remove the 3 screws that retain the mounting bracket to the cowl panel.