< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Leaf Springs
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Shackle
PartNumber: 15665302
Product Specifications- Notes: Leaf Spring Anchor; S-Series
- Location: Driver Side; Passenger Side
- Other Names: Shackle, Spring Shackle
- Item Dimensions: 7.0 x 4.5 x 4.5 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Shackle
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$48.43 MSRP:$91.40You Save: $42.97 (48%)
Dorman® Rear Leaf Spring Shackle for 2000 Chevrolet Blazer
PartNumber: 722-028Product Specifications- Material: Steel
- Mounting Hardware: With
- OE Part Number: 15665302
- Packaging: Box
- UPC: 019495388142
- Part Description: 2000 Chevrolet Blazer Rear Leaf Spring Shackle
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$31.00
FAQ for Leaf Spring Shackle Repair
Q: What do I need to ensure when installing the frame to the spring shackle mounting bolt and nut?
A:
You need to ensure that you don't tighten the nut.
By Bob
GM Specialist
01/11/2022Q: How to remove the Spring Shackle?
A:
You need to raise and suitably support the vehicle and remove the fuel tank, the EVAP canister, and the spare tire, if necessary. Then you need to disconnect the rear exhaust hangers, lower the exhaust system and support the rear axle. After that, you need to remove the frame to spring shackle mounting nut and bolt and remove the leaf spring to spring shackle mounting nut and bolt. Finally, you need to remove the spring shackle from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What do I need to remove additionally, if my vehicles are 2-door utilities only?
A:
You need to remove the fuel tank and the EVAP canister.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the spring shackle mounting nuts?
A:
The recommended torque is 122 Nm (89 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: Which tool is required during the Shackle Bushing replacement?
A:
You need to prepare a J 21474-01 Control Arm Bushing Service Kit.
By Bob
GM Specialist
01/11/2022Q: Do I need to tighten the nut when installing the spring shackle to frame the mounting bolt and nut?
A:
No, you are recommended not to tighten the nut.
By Bob
GM Specialist
01/11/2022See more FAQs (1)