< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Knuckle Steering
PartNumber: 18060560
Product Specifications- Notes: 2WD; Blazer/Jimmy; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 14.0 x 13.8 x 5.4 inches
- Item Weight: 10.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15730620
- Part Description: 2000 Chevrolet Blazer Knuckle Steering
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Knuckle, Steering
PartNumber: 15294229
Product Specifications- Notes: 4WD, W/AWD; S-Series; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 5.8 x 13.0 x 12.7 inches
- Item Weight: 10.50 Pounds
- Replaces: 15704493, 18060557
- Part Description: 2000 Chevrolet Blazer Knuckle, Steering
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Steering Knuckle
PartNumber: 18060559
Product Specifications- Notes: 2WD; Blazer/Jimmy; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 13.6 x 13.8 x 11.7 inches
- Item Weight: 10.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Steering Knuckle
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Knuckle, Steering
PartNumber: 18060558Product Specifications- Notes: 4WD, W/AWD; S-Series; Right
- Location: Passenger Side
- Item Dimensions: 5.7 x 12.7 x 12.6 inches
- Item Weight: 11.30 Pounds
- Replaced by: 15294230
- Part Description: 2000 Chevrolet Blazer Knuckle, Steering
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Steering Knuckle Repair
Q: What is the recommended torque for the lower ball joint to the steering knuckle retaining nut?
A:
The recommended torque is 108 Nm (79 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What do we need to notice when we are tightening the lower/upper ball joint?
A:
Don't tighten the lower/upper ball joint retaining nut more than 1/6 turn.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the upper ball joint to the steering knuckle retaining nut?
A:
The recommended torque is 83 Nm (61 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: How to release the stud from the steering knuckle?
A:
You can carefully hammer on the steering knuckle in the area of the upper ball joint stud.
By Bob
GM Specialist
02/11/2022Q: What tools are required during the Steering Knuckle Replacement?
A:
J24319-B Steering Linkage, Tie Rod Puller and J 43631 Ball Joint Separator Tool are required.
By Bob
GM Specialist
02/11/2022