< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Cut-Off Switch
PartNumber: 89019183
Product Specifications- Notes: S-Series
- Item Dimensions: 2.6 x 2.0 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 2724727, 2724863, 02724863, 02724727
- Part Description: 2000 Chevrolet Blazer Cut-Off Switch
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$51.01 MSRP:$96.26You Save: $45.25 (48%)OEM (Genuine) 2000 Chevrolet Blazer Lower Pressure Cut-Off Switch
PartNumber: 52473139
Product Specifications- Notes: S-Series; 4.3l; Blazer/Jimmy
- Item Dimensions: 3.1 x 2.0 x 1.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Lower Pressure Cut-Off Switch
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$26.53 MSRP:$50.08You Save: $23.55 (48%)
FAQ for HVAC Pressure Switches Repair
Q: Which tool is required during the procedure?
A:
You need to prepare a J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the A/C low-pressure switch?
A:
It is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the A/C High-Pressure Switch?
A:
You need to recover the refrigerant from the A/C system, and you need to remove the air cleaner outlet duct. Then you need to disconnect the A/C high-pressure switch electrical connector. After that, you need to remove the A/C high-pressure switch connector retaining ring. Finally, you can remove the A/C high-pressure switch from the A/C compressor.
By Bob
GM Specialist
01/11/2022Q: How to remove the A/C Low-Pressure Switch?
A:
You need to disconnect the A/C low-pressure switch electrical connector, then you need to remove the A/C low-pressure switch from the accumulator.
By Bob
GM Specialist
01/11/2022Q: Which tool is required during the A/C High-Pressure Switch replacement?
A:
You need to prepare the J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
01/11/2022