< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Extension Housing Seal
PartNumber: 24232325
Product Specifications- Notes: S-Series
- Other Names: Extension Housing Seal
- Item Dimensions: 3.7 x 3.8 x 1.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24201470
- Part Description: 2000 Chevrolet Blazer Extension Housing Seal
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$13.93 MSRP:$23.03You Save: $9.10 (40%)
National® Automatic Transmission Extension Housing Seal for 2000 Chevrolet Blazer
PartNumber: 4333NProduct Specifications- Notes: Boot Type; w/1.500in Width; w/New Process 233C Transfer Case; 2Spd; w/Part Time 4WD
- Type: 79
- Part Description: 2000 Chevrolet Blazer Automatic Transmission Extension Housing Seal
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$15.77
National® Automatic Transmission Extension Housing Seal for 2000 Chevrolet Blazer
PartNumber: 710928Product Specifications- Notes: Dual Lip; w/New Process 233C Transfer Case; 2Spd; w/Part Time 4WD
- Housing Bore (Inch): 2.680 in
- Housing Bore (mm): 68.070 mm
- Inside Diameter (Inch): 1.938 in
- Inside Diameter (mm): 49.230 mm
- Material: Polyacrylate
- Outside Diameter (Inch): 2.685 in
- Outside Diameter (mm): 68.200 mm
- Sealing Material: Polyacrylate
- Series: 710900
- Shaft (Inch): 1.938 in
- Shaft (mm): 49.230 mm
- Thickness (Inch): 0.500 in
- Thickness (mm): 12.700 mm
- Type: 32
- Width (Inch): 0.500 in
- Width (mm): 12.700 mm
- Part Description: 2000 Chevrolet Blazer Automatic Transmission Extension Housing Seal
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$7.26
FAQ for Automatic Transmission Extension Housing Seal Repair
Q: What is the recommended torque for the case extension bolts?
A:
It is 45 Nm (33 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to install the Transmission Extension Housing Assembly?
A:
You need to raise and suitably support the vehicle. Then you need to support the transmission with a transmission jack and place a drain pan under the vehicle. After that, you need to remove the propeller shaft, the transmission mount, the case extension bolts, and the case extension. Finally, you should remove and discard the case extension O ring seal.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 5 bearing retainer bolts?
A:
The recommended torque is 29 Nm (21 ft. lbs.).
By Bob
GM Specialist
28/10/2022Q: What tools are required during the Housing Oil Seal replacement?
A:
You need to prepare J 41371 Reluctor Gear Puller and a J 38801 Input Shaft Seal Installer.
By Bob
GM Specialist
28/10/2022Q: What tools are required during the Transmission Extension Housing Rear Oil Seal replacement?
A:
You need to prepare the J 21426 Extension Housing Seal Installer, and the J 36850 Transjel Lubricant.
By Bob
GM Specialist
28/10/2022Q: How to remove the Transmission Extension Housing Rear Oil Seal?
A:
You need to raise the vehicle, and place a drain pan under the vehicle. Then you need to remove the propeller shaft. After that, you need to remove the case extension housing rear oil seal. Finally, you need to inspect the case extension housing for damage.
By Bob
GM Specialist
28/10/2022Q: What tools are required during the Transmission Housing Oil Seal replacement?
A:
You need to prepare a J 23129 Universal Seal Remover, a J 6125-1B Slide Hammer, and a J 36503 Seal Installer.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the clutch actuator bolts?
A:
The recommended torque is 8 Nm(71-inch lbs.).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the 6 bearing retainer bolts?
A:
The recommended torque is 14 Nm (10 ft. lbs.).
By Bob
GM Specialist
28/10/2022Q: How to remove the Transmission Housing Oil Seal?
A:
You need to raise and support the vehicle. Then you need to remove the rear propeller shaft. After that, you need to remove the rear oil seal from the rear case. Finally, you need to remove the rear oil seal from the extension housing.
By Bob
GM Specialist
28/10/2022See more FAQs (7)