< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Drier
PartNumber: 89038598
Product Specifications- Notes: S-Series; W/4.3l; Blazer, Jimmy
- Other Names: Accumulator, Dehydrator, Drier
- Item Dimensions: 10.4 x 7.4 x 6.3 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 2724845, 2724945, 02724945
- Part Description: 2000 Chevrolet Blazer Drier
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$39.52 MSRP:$74.58You Save: $35.06 (48%)
Spectra Premium® A/C Accumulator for 2000 Chevrolet Blazer
PartNumber: 0233140Product Specifications- UPC: 671607160611
- Part Description: 2000 Chevrolet Blazer A/C Accumulator
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$13.84
Four Seasons® A C Accumulator for 2000 Chevrolet Blazer
PartNumber: 33140Product Specifications- Body Diameter: 3.500
- Body Length: 9.000
- Dia. MM: 88.900
- Inlet Fitting Diameter: 3/4
- Inlet Fitting Type: Female O-Ring
- Inlet Thread Size: M27x2.000
- Length MM: 228.600
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Hardware: Hardware not included.
- O-Ring A Number/Desc: [24676] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24612] / Green O-Ring
- O-Ring B Quantity: 2
- Outlet Fitting Type: Male Insert O-Ring
- Outlet Fraction: 3/4
- Outlet Thread Size: M27x2.000
- Style: Complete Unit
- Switch: w/ Switch Port
- Switch Port Dia. IN: 0.472
- Switch Port Dia.MM: 12.000
- Switch Service Port: w/ Service Port
- UPC: 096361331402
- Part Description: 2000 Chevrolet Blazer A C Accumulator
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$19.44
FAQ for A/C Accumulator Repair
Q: What defects should we pay attention to when we are inspecting the 1-2 accumulator piston or the 1-2 accumulator cover?
A:
You should pay attention to porosity, cracks, scoring, nicks, and scratches.
By Bob
GM Specialist
01/11/2022Q: Which A/C pressure switch should I remove after I recover the refrigerant from the A/C system?
A:
You should remove the 4.3L A/C pressure switch.
By Bob
GM Specialist
01/11/2022Q: How to connect the compressor hose assembly to the accumulator?
A:
You need to tighten the nut to 48 N.m (35 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What items should we pay attention to when we remove the spacer plate support retaining bolts?
A:
You should not drop the number 1 check ball, the 3-4 accumulator spring, and the 3-4 accumulator pin.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the evaporator retaining nut?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the accumulator clamp bolt?
A:
The recommended torque is 10 N.m (88 lb in).
By Bob
GM Specialist
01/11/2022Q: What should I do if I want to replace the accumulator during the installation?
A:
You need to add the refrigerant oil to the accumulator.
By Bob
GM Specialist
01/11/2022See more FAQs (2)