2000 Cadillac Escalade Engine Mount Bracket

You need to slide the accessory mounting bracket on the stud and install the three bolts and the nut, the belt idler pulley, the drive belt tensioner, the wire harness bracket to the generator and drive belt tensioner mounting bracket, the generator and the drive belt. Then you can connect the battery negative cable and install the engine cooling fan.

You need to slide the bracket on the stud and the power steering pump. Install the three bolts and the nut, the power steering pump to the power steering pump bracket, the air conditioning compressor bolts, the belt idler pulley if not equipped with A/C, the drive belt, and the engine cooling fan.

You need to disconnect the battery negative cable and remove the engine cooling fan, the drive belt, the wire harness bracket from the generator, and the drive belt tensioner bracket. Then you can remove the drive belt tensioner, the belt idler pulley, the three bolts and nuts holding the generator, and the drive belt tensioner to the engine. Then slide the accessory mounting bracket off of the stud.

You need to remove the engine cooling fan, the drive belt, and the mounting bolts for the air conditioning compressor if equipped. Move the air conditioning compressor aside and support and remove the belt idler pulley if not equipped with A/C, the power steering pump from the power steering pump bracket, and the three bolts and nuts holding the accessory mounting bracket to the engine. Then you can slide the accessory mounting bracket off the stud and power steering pump.