< Back ×
My Vehicle Change Vehicle
2000 Cadillac Escalade
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2000 Cadillac Escalade Inner Shaft
PartNumber: 19121908
Product Specifications- Notes: Under 7500 Gvw
- Other Names: Inner Shaft, Output Shaft, Shaft
- Item Dimensions: 7.0 x 4.6 x 4.6 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15588366, 12479219, 15801502
- Part Description: Inner Shaft
$205.99 MSRP:$340.95You Save: $134.96 (40%)
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2000 Cadillac Escalade
PartNumber: 65-9361Product Specifications- Notes: with 31-3/4" (806 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 31.75"
- Length (mm): 806
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Remanufactured Driveshaft/ Prop Shaft
$320.39
OEM (Genuine) 2000 Cadillac Escalade Outer Shaft
PartNumber: 26059714
Product Specifications- Notes: Over 7500 Gvw; Left
- Other Names: Outer Shaft, Output Shaft
- Item Dimensions: 7.5 x 6.9 x 6.9 inches
- Item Weight: 6.90 Pounds
- Replaced by: 26058806
- Part Description: Outer Shaft
$683.33 MSRP:$883.44You Save: $200.11 (23%)
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2000 Cadillac Escalade
PartNumber: 65-9390Product Specifications- Notes: with 40-1/4" (1022 mm) Long Driveshaft;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: No
- Length: 40.25"
- Length (mm): 1022,35
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Remanufactured Driveshaft/ Prop Shaft
$314.53
OEM (Genuine) 2000 Cadillac Escalade Axle Shafts
PartNumber: 26010416
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 32.4 x 6.6 x 6.7 inches
- Item Weight: 19.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: Axle Shafts
$233.31 MSRP:$370.44You Save: $137.13 (38%)
OEM (Genuine) 2000 Cadillac Escalade Inner Shaft
PartNumber: 19121909
Product Specifications- Notes: Over 7500 Gvw
- Other Names: Inner Shaft, Pinion Shaft, Shaft
- Item Dimensions: 8.8 x 3.9 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15521907
- Part Description: Inner Shaft
$213.29 MSRP:$353.04You Save: $139.75 (40%)
OEM (Genuine) 2000 Cadillac Escalade Axle Shaft
PartNumber: 3977383
Product Specifications- Notes: All Models; Left Side
- Item Dimensions: 33.6 x 4.4 x 4.3 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: Axle Shaft
OEM (Genuine) 2000 Cadillac Escalade Outer Shaft
PartNumber: 26058813
Product Specifications- Notes: Under 7500 Gvw; Left; 4WD, Outer
- Location: Driver Side
- Other Names: Axle Shaft, Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 8.4 x 7.8 x 10.5 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26059717
- Part Description: Outer Shaft
OEM (Genuine) 2000 Cadillac Escalade Front Wheel Drive Shaft Kit
PartNumber: 26062613
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 27.1 x 7.1 x 6.9 inches
- Item Weight: 23.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037365
- Part Description: Front Wheel Drive Shaft Kit
OEM (Genuine) 2000 Cadillac Escalade Front Drive Axle Inner Shaft (Rh)
PartNumber: 26058832
Product Specifications- Notes: Under 7500 Gvw; Right; 4WD, Outer
- Location: Passenger Side
- Other Names: Axle Shaft, Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 17.5 x 6.8 x 6.3 inches
- Item Weight: 9.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26059713
- Part Description: Front Drive Axle Inner Shaft (Rh)
OEM (Genuine) 2000 Cadillac Escalade Front Wheel Drive Shaft Kit
PartNumber: 26060240Product Specifications- Notes: All
- Other Names: Axle Assembly
- Item Dimensions: 27.5 x 7.2 x 7.4 inches
- Item Weight: 30.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26066389, 26048460
- Part Description: Front Wheel Drive Shaft Kit
OEM (Genuine) 2000 Cadillac Escalade Rear Axle Shaft
PartNumber: 26010417Product Specifications- Notes: All Models; 4WD
- Other Names: Axle Shaft
- Item Dimensions: 34.8 x 8.1 x 8.2 inches
- Item Weight: 17.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: Rear Axle Shaft
OEM (Genuine) 2000 Cadillac Escalade Shaft, Rear Axle
PartNumber: 26020040
Product Specifications- Notes: All Models; Right
- Other Names: Axle Shaft
- Item Dimensions: 37.6 x 4.7 x 4.5 inches
- Item Weight: 18.40 Pounds
- Part Description: Shaft, Rear Axle
OEM (Genuine) 2000 Cadillac Escalade Rear Axle Drive Shaft
PartNumber: 15521928
Product Specifications- Notes: All Models; All; 4WD
- Other Names: Axle Shaft
- Item Dimensions: 35.9 x 8.2 x 8.2 inches
- Item Weight: 26.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: Rear Axle Drive Shaft
OEM (Genuine) 2000 Cadillac Escalade Front Drive Axle Inner Shaft
PartNumber: 26059716
Product Specifications- Notes: Over 7500 Gvw; Right
- Other Names: Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 15.3 x 6.8 x 6.8 inches
- Item Weight: 10.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: Front Drive Axle Inner Shaft
OEM (Genuine) 2000 Cadillac Escalade Front Drive Axle Clutch Fork Shaft
PartNumber: 26033975
Product Specifications- Notes: All Models
- Other Names: Fork Shaft, Inner Shaft, Shaft
- Item Dimensions: 4.4 x 2.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: Front Drive Axle Clutch Fork Shaft
OEM (Genuine) 2000 Cadillac Escalade Shaft, Front Wheel Drive
PartNumber: 26056795
Product Specifications- Notes: Under 7500 Gvw; 4WD, 5.7 Liter
- Other Names: Axle Shaft
- Part Description: Shaft, Front Wheel Drive
OEM (Genuine) 2000 Cadillac Escalade Axle Shafts
PartNumber: 12380993Product Specifications- Notes: All Models
- Other Names: Axle Shaft
- Fitment Type: Direct Replacement
- Part Description: Axle Shafts
OEM (Genuine) 2000 Cadillac Escalade Driveshaft
PartNumber: 26056797Product Specifications- Notes: Over 7500 Gvw
- Part Description: Driveshaft
FAQ for Driveshaft Repair
Q: How to remove the front propeller shaft?
A:
You need to support the propeller shaft and not allow the universal joint to bend deeply as the universal joint could fracture, then remove the propeller shaft with a rearward movement.
By Bob
GM Specialist
29/10/2022Q: How do you remove the propeller shaft (front axle-all except for NP8)?
A:
You need to raise the vehicle on a hoist and remove the front differential carrier shield, the bolts and the retainers from the front axle, the bolts, and retainers from the transfer case, and the propeller shaft. Then compress the propeller shaft forward enough to disengage and move the propeller shaft rearward. Avoid dropping the bearing cap assemblies from the yoke ends, clean all parts with an approved solvent and inspect the splines for damage, wear, burrs, and twisting, the universal joint bearings for wear, and the propeller shaft for any evidence of damage.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the yoke?
A:
The recommended torque is 20 Nm (26 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: What should I avoid doing when removing the propeller shaft (front axle-NP8)?
A:
You should avoid dropping the bearing cap assemblies of the yoke end.
By Bob
GM Specialist
29/10/2022Q: How do you install the propeller shaft?
A:
You need to install the propeller shaft into the transmission, lubricate the slip joint spline with chassis grease and align the reference marks on the pinion flange and the propeller shaft rear yoke. Then you can install the yoke and cross assembly onto the fixed yoke and install the retainers and the bolts.
By Bob
GM Specialist
29/10/2022Q: What special tools will I be needing when removing the propeller shaft (front axle-NP8)?
A:
You will be needing clamp pliers.
By Bob
GM Specialist
29/10/2022Q: How do you install the propeller shaft (front axle-NP8)?
A:
You need to verify that the splines of the transfer case are coated with sufficient grease. If not, use special Teflon grease (GM P/N 12345879). Place the new clamp in the groove of the propeller shaft boot and install the propeller shaft splines into the transfer case output shaft, the boot onto the transfer case output shaft until the boot snaps into the groove on the OD of the output shaft, the propeller shaft to the front axle, the retainers and bolts, and the transmission control lever to the manual control shaft with the nut. Next, you can crimp the clamp with J43218 and install the transfer case shield, if equipped. Then lower the vehicle and position the steering column transmission shift lever to PARK (P).
By Bob
GM Specialist
29/10/2022Q: How to remove the rear propeller shaft?
A:
You need to slide the rear propeller shaft forward, lower the rear propeller shaft and withdraw under the rear axle. The joint may fracture. Reference mark the intermediate propeller shaft to the front propeller shaft yoke. Then support the intermediate propeller shaft.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the center-bearing support?
A:
The recommended torque is 35 Nm (26 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: How do you install the propeller shaft (front axle-all except for NP8)?
A:
You need to extend the propeller shaft to its full length, then compress it to about half its stroke. Install the propeller shaft to the front axle by lining up the reference marks made previously, the retainers and bolts, the propeller shaft to the transfer case, and the retainers and bolts. Then install the front differential carrier shield, if equipped, and apply chassis lubricant at the slip spline grease fitting until the grease begins to leave through the vent hole.
By Bob
GM Specialist
29/10/2022See more FAQs (6)