Notes: Updated design w/Check Valve. Can be used to replace fuel pump modules built w/or w/o check valve; Original OE design had a 2x2 connector, OE design upgraded to a 1x4 connector; A 1x4 splice kit included for vehicles w/2x2 connector; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 7
Flow Rating: 22 gph
Fuel Level Sender Assembly Included: Yes
Fuel Type: Gas
Gasket or Seal Included: Yes
In Tank or External: In Tank
Inlet Type: Strainer
Internal or External Strainer: Internal
Item Grade: Standard Replacement
Maximum Pressure: 65.0 PSI
Outlet Outside Diameter: 0.375''
Outlet Quantity: 2
Outlet Type: Quick Connect
Pump Type: Electric
Regulator Included: No
Resistance Ohms Empty: 40.0
Resistance Ohms Full: 250.0
Strainer Included: Yes
System Pressure: 52 psi
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: Blade
UPC: 689604095102
Vapor Pressure Sensor: Yes
Voltage: 12.0 VDC
Part Description: 1998 Cadillac Seville Fuel Pump Module Assembly
Notes: Original design w/o Check Valve. Must only be used to replace fuel pump modules built w/o check valve. If you are unsure if your module has a check valve, then use FG0347; Two port cover utilized for manufacturing only use the open port do not tamper w/plugged tube port; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 7
Flow Rating: 22 gph
Fuel Level Sender Assembly Included: Yes
Fuel Type: Gas
Gasket or Seal Included: Yes
In Tank or External: In Tank
Inlet Type: Strainer
Internal or External Strainer: External
Item Grade: Standard Replacement
Maximum Pressure: 109.0 PSI
Outlet Outside Diameter: 0.375''
Outlet Quantity: 2
Outlet Type: Quick Connect
Pump Type: Electric
Regulator Included: No
Resistance Ohms Empty: 40.0
Resistance Ohms Full: 250.0
Strainer Included: Yes
System Pressure: 52 psi
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: Blade
UPC: 689604060995
Vapor Pressure Sensor: Yes
Voltage: 13.0 VDC
Part Description: 1998 Cadillac Seville Fuel Pump Module Assembly
Notes: Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal.Fuel Sensor Design Provides Resistance To Corrosive Fuel Blends And Additives.
Average Current Draw(A): 9
Average Flow Rating(GPH): 41
Connector Gender: Male
Connector Quantity: 1
Connector Shape: Rectangle
Country of Orign: China
Fuel Filter Included: No
Fuel Sending Unit Included: Yes
Fuel Tank Pressure Sensor Included: Yes
Fuel Type: Turbine
Gasket or Seal Included: Yes
Gasket Or Seal Material: NBR
Grade Type: Regular
Housing Material: POM
In Tank or External: In Tank
Inlet Size: 5/16
Inlet Type: Quick Connect
Installation Warnings: No
Internal or External: Internal
Lock Ring Included: No
Maximum Free Flow (GPH): 63.5
Maximum Pump Pressure (PSI): 145
Minimum Free Flow (GPH): 52.8
Minimum Pump Pressure (PSI): 87
Mounting Hardware Included: No
Negative Ground: No
Outlet Quantity: 1
Outlet Size: 3/8
Outlet Type: Quick Connect
Product Height (in): 7.17
Product Length (in): 13.78
Product Width (in): 7.68
Pump Type: Turbine
Regulator Included: No
Resistance Ohms Empty: 40
Resistance Ohms Full: 250
Strainer Included: Yes
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: PIN
UPC: 00072845125293
Voltage: 12V
Weight (lbs): 2.27
Wire Harness Included: Yes
Part Description: 1998 Cadillac Seville Fuel Pump Module Assembly