Notes: 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank;with Rear Steel Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 7
Flow Rating: 32 gph
Fuel Level Sender Assembly Included: Yes
Fuel Type: Gas
Gasket or Seal Included: Yes
In Tank or External: In Tank
Inlet Type: Strainer
Internal or External Strainer: External
Item Grade: Standard Replacement
Maximum Pressure: 73.0 PSI
Outlet Outside Diameter: 0.375''
Outlet Quantity: 2
Outlet Type: Quick Connect
Pump Type: Electric
Resistance Ohms Empty: 15.0
Resistance Ohms Full: 160.0
Strainer Included: Yes
System Pressure: 36 psi
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: Pin
UPC: 689604218600
Voltage: 12.0 VDC
Part Description: 1987 Ford F-250 Fuel Pump Hanger Assembly
Notes: with 19 Gallon Tank;Includes Fuel Pump, Sending Unit, Float, Fuel Strainer and Tank Seal;Two Fuel Pumps May Be Required, One Mounted In-Tank Pump and One Mounted Externally;Center Tank;w/Center Tank
Average Current Draw(A): 2.5
Average Flow Rating(GPH): 46
Connector Gender: Male
Connector Quantity: 1
Connector Shape: Elliptic
Country of Orign: China
Fuel Filter Included: No
Fuel Sending Unit Included: Yes
Fuel Tank Pressure Sensor Included: No
Gasket or Seal Included: Yes
Gasket Or Seal Material: NBR
Grade Type: Performance
In Tank or External: In Tank
Inlet Size: 0.748
Inlet Type: Strainer
Installation Warnings: No
Internal Or External Strainer: External
Lock Ring Included: No
Maximum Pump Pressure (PSI): 10
Minimum Pump Pressure (PSI): 2
Mounting Hardware Included: No
Negative Ground: No
Outlet Quantity: 1
Outlet Size: 3/8
Outlet Type: Quick Connect
Product Height (in): 4.72
Product Length (in): 12.2
Product Width (in): 11.22
Pump Type: Turbine
Regulator Included: No
Resistance Ohms Empty: 13
Resistance Ohms Full: 162
Strainer Included: Yes
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: PIN
UPC: 00072845111142
Voltage: 12V
Weight (lbs): 1.69
Wire Harness Included: No
Part Description: 1987 Ford F-250 Fuel Pump And Sender Assembly
Notes: 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank;with 19 Gallon Midship Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 7
Flow Rating: 32 gph
Fuel Level Sender Assembly Included: Yes
Fuel Type: Gas
Gasket or Seal Included: Yes
In Tank or External: In Tank
Inlet Type: Strainer
Internal or External Strainer: External
Item Grade: Standard Replacement
Maximum Pressure: 73.0 PSI
Outlet Outside Diameter: 0.375''
Outlet Quantity: 2
Outlet Type: Quick Connect
Pump Type: Electric
Resistance Ohms Empty: 10.0
Resistance Ohms Full: 160.0
Strainer Included: Yes
System Pressure: 36 psi
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: Pin
UPC: 689604218594
Voltage: 12.0 VDC
Part Description: 1987 Ford F-250 Fuel Pump Hanger Assembly
Notes: 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank;with 17 Gallon Midship Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 6
Flow Rating: 32 gph
Fuel Level Sender Assembly Included: Yes
Fuel Type: Gas
Gasket or Seal Included: Yes
In Tank or External: In Tank
Inlet Type: Strainer
Internal or External Strainer: External
Item Grade: Standard Replacement
Maximum Pressure: 73.0 PSI
Outlet Outside Diameter: 0.375''
Outlet Quantity: 2
Outlet Type: Quick Connect
Pump Type: Electric
Resistance Ohms Empty: 10.0
Resistance Ohms Full: 160.0
Strainer Included: Yes
System Pressure: 36 psi
Terminal Gender: Male
Terminal Quantity: 4
Terminal Type: Pin
UPC: 689604226698
Voltage: 12.0 VDC
Part Description: 1987 Ford F-250 Fuel Pump Hanger Assembly
Notes: w/Rear Plastic Tank, Low Pressure Pump;Two fuel pumps may be required, one mounted in-tank and one mounted externally.,In-Tank;Strainer required to validate the warranty: F111S,In-Tank;Includes Tank Seal,In-Tank
Average Current Draw(A): 2.8
Average Flow Rating(GPH): 120
Country of Orign: China
Gasket or Seal Included: No
In Tank or External: In Tank
Inlet Size: 0.53
Inlet Type: Filter
Installation Warnings: No
Lock Ring Included: No
Maximum Pump Pressure (PSI): 8
Minimum Pump Pressure (PSI): 5
Negative Ground: No
Outlet Quantity: 1
Outlet Size: 0.36
Outlet Type: Male tube / 1 barb
Product Height (in): 3
Product Length (in): 7.5
Product Width (in): 3.75
Pump Type: Turbine
Regulator Included: No
Strainer Included: No
Terminal Gender: Male
Terminal Quantity: 2
Terminal Type: Chip
UPC: 00072845114952
Voltage: 13.8V
Weight (lbs): 0.6
Wire Harness Included: No
Part Description: 1987 Ford F-250 Electric Fuel Pump
Notes: 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 5
Flow Rating: 28 gph
Fuel Type: Gas
Gasket or Seal Included: No
In Tank or External: External
Inlet Outside Diameter: 0.313''
Inlet Type: Quick Connect
Item Grade: Standard Replacement
Maximum Pressure: 99.0 PSI
Outlet Outside Diameter: 0.313''
Outlet Type: Quick Connect
Pump Type: Electric
Strainer Included: No
System Pressure: 44 psi
Terminal Gender: Male
Terminal Quantity: 2
Terminal Type: Threaded
UPC: 689604032619
Voltage: 12 VDC
Wiring Harness Included: No
Part Description: 1987 Ford F-250 In Line Electric Fuel Pump
Notes: with Midship Tank;2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 2
Flow Rating: 39 gph
Fuel Type: Gas
Gasket or Seal Included: Yes
In Tank or External: In Tank
Inlet Type: Strainer
Item Grade: Standard Replacement
Maximum Pressure: 9.0 PSI
Outlet Outside Diameter: 0.375''
Outlet Type: Hose
Pump Type: Electric
Strainer Included: No
System Pressure: 5 psi
Terminal Gender: Male
Terminal Quantity: 2
Terminal Type: Threaded
UPC: 689604033388
Voltage: 12 VDC
Wiring Harness Included: No
Part Description: 1987 Ford F-250 In Tank Electric Fuel Pump
Notes: Two fuel pumps may be required, one mounted in-tank and one mounted externally;Includes Tank Seal;Low Pressure Pump;Strainer required to validate the warranty: F123S;w/Rear Steel Tank
Average Current Draw(A): 2
Average Flow Rating(GPH): 115
Connector Quantity: 2
Connector Shape: Screw
Country of Orign: China
Gasket or Seal Included: No
Grade Type: Performance
In Tank or External: In Tank
Inlet Size: 0.748
Inlet Type: filter
Installation Warnings: No
Internal Or External Strainer: External
Maximum Pump Pressure (PSI): 7.25
Minimum Pump Pressure (PSI): 2.9
Outlet Quantity: 1
Outlet Size: 0.37
Outlet Type: Male Quick Connect
Product Height (in): 1.46
Product Length (in): 4.13
Product Width (in): 1.46
Pump Type: Turbine
Regulator Included: No
Terminal Quantity: 2
Terminal Type: Thread
UPC: 00072845114969
Voltage: 12V
Weight (lbs): 0.41
Part Description: 1987 Ford F-250 In Tank Electric Fuel Pump
Notes: 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank;with Rear Steel Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Current Draw: 2
Flow Rating: 30 gph
Fuel Type: Gas
Gasket or Seal Included: Yes
In Tank or External: In Tank
Inlet Type: Strainer
Item Grade: Standard Replacement
Maximum Pressure: 6.0 PSI
Outlet Outside Diameter: 0.313''
Outlet Type: Hose
Pump Type: Electric
Strainer Included: No
System Pressure: 2 psi
Terminal Gender: Male
Terminal Quantity: 2
Terminal Type: Threaded
UPC: 689604215234
Voltage: 12 VDC
Wiring Harness Included: No
Part Description: 1987 Ford F-250 In Tank Electric Fuel Pump
Notes: with Steel Tank;with 17 or 19 Gallon Tank;This Fuel System Reqs more than one Fuel Pump. System Reqs In-Tank Low Pressure Fuel Pump(s) & In-Line High Pressure Fuel Pump
Gasket Included: Y
Hazardous Material: No
Inlet Count: 1
Inlet Type: Strainer
Item Grade: Standard Replacement
Maximum Free Flow Rate (gph): 35
Maximum Pressure Rate (psi): 6
Minimum Free Flow Rate (gph): 20
Minimum Pressure Rate (psi): 4
Outlet Count: 1
Outlet Size: 3/8
Outlet Type: Hose Connect
Package Contents: Pump & Kit
Package Quantity: 1
Warranty: Lifetime Limited Warranty
Part Description: 1987 Ford F-250 In-Tank Electric Fuel Pump