Notes: with 56-1/4" (1428 mm) Long Driveshaft;with 244 Transfer Case;Measurement taken from end of input shaft to end of flange face; Supplied as new
Greasable: No
Length: 56.25"
Length (mm): 1428
Material: Steel
Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Tubing Outer Diameter (in): 3.00"
Part Description: 2009 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Notes: with 144 Transfer Case;with 28-3/4" (730 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face
Greasable: No
Length: 28.75"
Length (mm): 730
Material: Steel
Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 2009 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Notes: with 62-11/16" (1592 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
Greasable: No
Length: 62.687"
Length (mm): 1592
Material: Steel
Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Tubing Outer Diameter (in): 3.00"
Part Description: 2009 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Notes: with 59-1/4" (1505 mm) Long Driveshaft;with 144 Transfer Case;Measurement taken from end of input shaft to end of flange face; Supplied as new
Greasable: No
Length: 59.25"
Length (mm): 1505
Material: Steel
Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Tubing Outer Diameter (in): 3.00"
Part Description: 2009 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Notes: w/New Process 144 Transfer Case; 1Spd; w/Part Time 4WD;w/New Process 244HD Transfer Case; 2Spd; Full Time 4WD;w/Magna 3010 Transfer Case; 1Spd; Full Time 4WD
Bore (Inch): 1.378
Bore (mm): 35.00
Design: Single Row Radial
Inner Race Bore (Inch): 1.378
Inner Race Bore (mm): 35.00
Inner Race Radius (Inch): 0.040
Inner Race Radius (mm): 1.020
Inner Race Width (Inch): 0.669
Inner Race Width (mm): 17.00
Outer Race Outside Diameter (Inch): 2.835
Outer Race Outside Diameter (mm): 72.00
Outer Race Radius (Inch): 0.040
Outer Race Radius (mm): 1.020
Outer Race Width (Inch): 0.669
Outer Race Width (mm): 17.00
Outside Diameter (Inch): 2.835
Outside Diameter (mm): 72.00
Series: 200
Type: A-1
Width (Inch): 0.669
Width (mm): 17.00
Part Description: 2009 Dodge Durango Driveshaft Center Support Bearing