< Back ×
My Vehicle Change Vehicle
2008 Mazda 6
Delphi® Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: FG1717Product Specifications- Notes: with California Emission System;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 10
- Flow Rating: 55 gph
- Fuel Level Sender Assembly Included: No
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Lock Ring Included: No
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Strainer Included: Yes
- System Pressure: 65 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604241110
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2008 Mazda 6 Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
$354.89
Gates® Keyed Alike Fuel Tank Cap for 2008 Mazda 6
PartNumber: 31836KAProduct Specifications- Cam Type: Quick-On
- Depth: 2.61
- Lockable: Yes
- Shell Diameter: 2.91
- Thread Diameter: 1.78
- UPC: 770075773269
- Venting: Emission Control
- Part Description: 2008 Mazda 6 Keyed Alike Fuel Tank Cap
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
$17.16
Victor Reinz® Upper Fuel Injection Plenum Gasket for 2008 Mazda 6
PartNumber: 15-10301-01Product Specifications- Notes: Upper
- Bolt Hole Quantity: 0
- Color: Color May Vary
- Complete: Y
- Contains Applications: Y
- Material: Molded Rubber
- Meets or Exceeds OEM Specs: Y
- Release Wave: 12/15/2017
- Thickness: 0.320
- UPC: 023913661762
- Part Description: 2008 Mazda 6 Upper Fuel Injection Plenum Gasket
Vehicle Fitment- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
$10.30
facet® Fuel Temperature Sensor for 2008 Mazda 6
PartNumber: 7.3234Product Specifications- Notes: Terminals: 2
- Part Description: 2008 Mazda 6 Fuel Temperature Sensor
Vehicle Fitment- 2008 Mazda 6 | i | 4 Cyl 2.3L
$12.89
Delphi® Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: FG1244Product Specifications- Notes: with Federal Emission System;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 8
- Flow Rating: 45 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 80.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 126.0
- Resistance Ohms Full: 15.0
- Strainer Included: Yes
- System Pressure: 51 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604232118
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2008 Mazda 6 Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
$297.52
Gates® Replacement Non Locking Fuel Tank Cap for 2008 Mazda 6
PartNumber: 31838Product Specifications- Cam Type: Quick-On
- Cap Depth: 2.41"
- Locking: No
- Neck Diameter: 2.78"
- Shell Diameter: 1.78"
- Type: OE Equivalent Fuel Cap
- UPC: 072053638943
- Venting: Emission Control
- Part Description: 2008 Mazda 6 Replacement Non Locking Fuel Tank Cap
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
$6.24
Delphi® Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: FG1246Product Specifications- Notes: with Federal Emission System;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 5
- Flow Rating: 40 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 57.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 127.0
- Resistance Ohms Full: 15.0
- Strainer Included: Yes
- System Pressure: 51 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604232132
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2008 Mazda 6 Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
$265.87
Delphi® Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: FG1287Product Specifications- Notes: with California Emission System;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 8
- Flow Rating: 23 gph
- Fuel Level Sender Assembly Included: No
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 64.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Strainer Included: Yes
- System Pressure: 65 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604232545
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2008 Mazda 6 Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
$190.87
Autobest® Electric Fuel Pump for 2008 Mazda 6
PartNumber: F4597AProduct Specifications- Notes: Except California;Includes Fuel Pump, Fuel Pressure Regulator, Sending Unit, Float, Fuel Reservoir, Fuel Strainer and Tank Seal
- Average Current Draw(A): 9.5
- Average Flow Rating(GPH): 38.3
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Rectangle
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Regular
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 66
- Minimum Pump Pressure (PSI): 66
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 3/8
- Outlet Type: Quick Connect
- Product Height (in): 6.1
- Product Length (in): 9.45
- Product Width (in): 9.06
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 125
- Resistance Ohms Full: 15
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845145970
- Voltage: 12V
- Weight (lbs): 2.61
- Wire Harness Included: No
- Part Description: 2008 Mazda 6 Electric Fuel Pump
Vehicle Fitment- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
$110.32
Gates® Locking Fuel Tank Cap for 2008 Mazda 6
PartNumber: 31836Product Specifications- Cam Type: Quick-On
- Cap Depth: 2.61"
- Locking: Yes
- Neck Diameter: 1.78"
- Shell Diameter: 2.91"
- Type: Regular Fuel Cap
- UPC: 072053608571
- Venting: Emission Control
- Part Description: 2008 Mazda 6 Locking Fuel Tank Cap
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
$13.63
Autobest® Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: F4599AProduct Specifications- Notes: Includes Fuel Pump, Fuel Pressure Regulator, Sending Unit, Float, Fuel Reservoir, Fuel Strainer and Tank Seal;Exc. California
- Average Current Draw(A): 10
- Average Flow Rating(GPH): 46.2
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Rectangle
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Regular
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 100
- Minimum Pump Pressure (PSI): 80
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 3/8
- Outlet Type: Quick Connect
- Product Height (in): 6.1
- Product Length (in): 9.06
- Product Width (in): 9.06
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 127
- Resistance Ohms Full: 15
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845145994
- Voltage: 12V
- Weight (lbs): 2.52
- Wire Harness Included: No
- Part Description: 2008 Mazda 6 Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
$97.54
Airtex® In-Tank Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: E8586MProduct Specifications- Notes: Fed Emissions
- Gasket or Seal Included: No
- Inlet Attachment: Inlet-Strainer
- Inlet Type: STRAINER
- Internal or External: Internal
- Internet Product Code (IPC): F7FA605A573
- Item Grade: STANDARD REPLACEMENT
- Item has MSDS (SDS): No
- Maximum Pressure (psi): 66
- MFG Brand Name: Airtex Products
- MFG Model # (Series): E8586M
- Minimum Pressure (psi): 66
- Outlet Attachment: Outlet-QuickConnect
- Outlet Size: 3/8
- Outlet Type: QUICK CONNECT
- Package Contents: Fuel Pump Module Assembly
- Package Quantity: 1
- Pump Type: Electrical
- Supplier Company Name: Airtex Products
- UPC: 080044016595
- Voltage [V]: 12V
- Wiring Harness Included: No
- Part Description: 2008 Mazda 6 In-Tank Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
Victor Reinz® Multi Purpose O-Ring for 2008 Mazda 6
PartNumber: 41-73337-00Product Specifications- Complete: Y
- Contains Applications: Y
- Release Wave: 03/29/2019
- UPC: 023913807412
- Part Description: 2008 Mazda 6 Multi Purpose O-Ring
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
Spectra Premium® Fuel Filler Neck for 2008 Mazda 6
PartNumber: FN1021Product Specifications- Cup Type: Quick-On
- Diameter: 1-1/4
- Fuel Type: Gas
- Length: 30
- UPC: 671607116625
- Vent 1: 11/16
- Vent Quantity: 1
- Part Description: 2008 Mazda 6 Fuel Filler Neck
Vehicle Fitment- 2008 Mazda 6 | All Trims | All Engines
STANT® Fuel Tank Cap for 2008 Mazda 6
PartNumber: 10508Product Specifications- Notes: Color Black; Part Replacement Replaces 48349
- Cam Type: Quick-On
- Cap Depth: 2.61"
- Neck Diameter: 1.78"
- Shell Diameter: 2.91"
- UPC: 033342039759
- Venting: Emission Control
- Part Description: 2008 Mazda 6 Fuel Tank Cap
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
Spectra Premium® Fuel Filler Neck for 2008 Mazda 6
PartNumber: FN1076Product Specifications- Notes: w/o Calif Emissions
- Cup Type: Quick-On
- Diameter: 2001-01-04
- Fuel Type: Gas
- Length: 31-1/2
- UPC: 671607117172
- Vent 1: 11/16
- Vent Quantity: 1
- Part Description: 2008 Mazda 6 Fuel Filler Neck
Vehicle Fitment- 2008 Mazda 6 | All Trims | All Engines
Airtex® Electric Fuel Pump for 2008 Mazda 6
PartNumber: E8588MProduct Specifications- Notes: with Federal Emission System
- Gasket or Seal Included: Yes
- Inlet Attachment: Strainer
- Inlet Type: STRAINER
- Internal or External: Internal
- Internet Product Code (IPC): C80646A5EDB
- Item Grade: OEM Standard
- Item has MSDS (SDS): No
- Maximum Pressure (psi): 100
- MFG Brand Name: Airtex Products
- MFG Model # (Series): E8588M
- Minimum Pressure (psi): 80
- Outlet Attachment: Quick Connect
- Outlet Type: QUICK CONNECT
- Package Contents: Fuel Pump Module Assembly
- Package Quantity: 1
- Pump Type: Electrical
- Supplier Company Name: Airtex Products
- UPC: 080044015420
- Voltage [V]: 12V
- Wiring Harness Included: No
- Part Description: 2008 Mazda 6 Electric Fuel Pump
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
STANT® Fuel Tank Cap for 2008 Mazda 6
PartNumber: 10838Product Specifications- Notes: Color Black; Part Replacement Replaces 48349
- Cam Type: Quick-On
- Cap Depth: 2.41"
- Neck Diameter: 2.78"
- Shell Diameter: 1.78"
- UPC: 033342039711
- Venting: Emission Control
- Part Description: 2008 Mazda 6 Fuel Tank Cap
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
STANT® Tan Fuel Cap Testing Adapter for 2008 Mazda 6
PartNumber: 12422Product Specifications- Notes: Tan w/Grey Ring
- Cam Type: Quick-On
- Color: Tan with Gray Ring
- UPC: 033342039629
- Part Description: 2008 Mazda 6 Tan Fuel Cap Testing Adapter
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
Airtex® Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: E8719MProduct Specifications- Notes: with California Emission System
- Gasket or Seal Included: No
- Inlet Count: 1
- Inlet Type: STRAINER
- Internal or External: Internal
- Item Grade: STANDARD REPLACEMENT
- Maximum Free Flow Rate (gph): 55
- Maximum Pressure (psi): 65
- Minimum Free Flow Rate (gph): 45
- Minimum Pressure (psi): 55
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: QUICK CONNECT
- Package Contents: PUMP & KIT
- Package Quantity: 1
- Pump Type: Electrical
- UPC: 080044050865
- Part Description: 2008 Mazda 6 Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | i | 4 Cyl 2.3L
Airtex® Fuel Pump Tank Seal for 2008 Mazda 6
PartNumber: TS8054Product Specifications- Notes: Except Calif
- Gasket Included: N
- Item Grade: STANDARD REPLACEMENT
- Package Contents: TANK SEAL
- Package Quantity: 1
- UPC: 080044062998
- Part Description: 2008 Mazda 6 Fuel Pump Tank Seal
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
Airtex® Fuel Pump Module Assembly for 2008 Mazda 6
PartNumber: E8794MProduct Specifications- Notes: California Models
- Gasket or Seal Included: No
- Inlet Count: 1
- Inlet Type: STRAINER
- Internal or External: Internal
- Item Grade: STANDARD REPLACEMENT
- Maximum Free Flow Rate (gph): 65
- Maximum Pressure (psi): 70
- Minimum Free Flow Rate (gph): 55
- Minimum Pressure (psi): 60
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: QUICK CONNECT
- Package Contents: PUMP & KIT
- Package Quantity: 1
- Pump Type: Electrical
- UPC: 080044050988
- Part Description: 2008 Mazda 6 Fuel Pump Module Assembly
Vehicle Fitment- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L
STANT® Regular Keyed Alike Fuel Cap for 2008 Mazda 6
PartNumber: 17508Product Specifications- Notes: Color Black
- Cap Depth: 2.625
- Color: Black
- Fuel Cap Venting: Emission Control
- Locking: Yes
- Material: Plastic
- Neck Diameter: 1.750
- Shell Diameter: 2.938
- Tether Included: No
- UPC: 333424900244
- Part Description: 2008 Mazda 6 Regular Keyed Alike Fuel Cap
Vehicle Fitment- 2008 Mazda 6 | All Trims | 4 Cyl 2.3L
- 2008 Mazda 6 | All Trims | 6 Cyl 3.0L