9 products about 2007 Saab 9-5 Wheel Hubs, Bearings, Seals & Components found
Product Specifications- Material: Steel
- Outside Diameter: 3.167"
- Thickness: 0.116"
- UPC: 019495433354
- Part Description: OE Solutions Front Wheel Bearing Retaining Ring
More Info Product Specifications- Bolt Circle Diameter A: 4.1340"
- Bolt Circle Diameter B: 4.1340"
- Bolt Hole Size: 0.407
- Flange Diameter: 5.510"
- Number of Bolts: 5
- Sensor Ring: Yes
- UPC: 085311302104
- Wheel Pilot Diameter: 2.5760"
- Part Description: Rear Driver Side Wheel Hub
More Info Product Specifications- Notes: FAG Global# 805150CC
- Hub Flange Mount Hole Quantity: 3
- Number of Bolt Holes: 3
- Number of Hub Bolts: 5
- UPC: 670774133923
- Part Description: Front Wheel Bearing and Hub Assembly
More Info Product Specifications- Notes: w/Saab F35 Trans
- Type: TS
- Part Description: Rear Driver Side Inner Wheel Bearing and Race Set
More Info Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone; w/Saab F35 Trans
- Cone Bore: 1.0625"
- Cone Length: 0.5800"
- Cone Radius: 0.1400"
- Cup Bore: 1.9800"
- Cup Length: 10.6680 mm
- Cup Radius: 1.1680 mm
- Standout: 3.5560 mm
- Taper Bearing Cone: L44649
- Taper Bearing Cup: L44610
- Width: 0.5600"
- Part Description: Front Driver Side Inner Wheel Bearing and Race Set
More Info Product Specifications- UPC: 805890562825
- Part Description: Premium™ Front Driver Side Driven Wheel Bearing and Hub Assembly
Product Specifications- Notes: Wheel Hub Assy; Axle Nut Torque Spec: 170 ft-lbs / 230Nm
- Flange Diameter (Inch): 5.395
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.542
- Material: Steel
- Product Condition: New
- Spline Quantity: 30
- Stud Quantity: 5
- UPC: 029175924683
- Wheel Stud Size MM: M12 x 1.5
- Wiring Harness Included: No
- Part Description: Wheel Bearing and Hub Assembly
More Info Product Specifications- UPC: 805890567578
- Part Description: Premium™ Wheel Bearing And Hub Assembly
Product Specifications- Notes: w/Saab F35 Trans
- Bore (Inch): 1.1811
- Bore (mm): 30.00
- Cone Length (Inch): 0.6299
- Cone Length (mm): 16.00
- Cone Radius (Inch): 0.0600
- Cone Radius (mm): 1.5240
- Cup Length (Inch): 0.5512
- Cup Length (mm): 14.00
- Cup Radius (Inch): 0.0600
- Cup Radius (mm): 1.5240
- Design: ISO Metric
- Outside Diameter (Inch): 2.4409
- Outside Diameter (mm): 62.00
- Series: 30200
- Standout (Inch): 0.1280
- Standout (mm): 3.2500
- Type: TS
- Width (Inch): 0.6791
- Width (mm): 17.2500
- Part Description: Wheel Bearing
More Info