Notes: Includes Inner Tie Rods;In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;with Hydraulic Power
Casting Material: Aluminum
Distance Between Mounting Holes (in): 10.438"
Hose Port Type: O-Ring
Import or Domestic: Import
Input Shaft Diameter (in): 0.700"
Input Shaft Length (in): 1.063"
Number of Mounting Holes: 2
Rack Length (in): 44.375"
Steering Rack Finish: Black
Thread Length (in): 2.9"
Total Turns Lock to Lock: 2.75
Type: Complete Unit
Part Description: Remanufactured Hydraulic Power Rack and Pinion Complete Unit
Notes: (w/oSpd Sensitive Strg); The pressure & return ports are the same size. If lines are crossed, the upper pinion seal will "blow" due to high pressure system. Install pressure line in Top port. Refer to warning label 640100.
Notes: (All models w/Speed Sensitive Strg.); Unit is equipped w/a electronic solenoid, this part is Incld. This solenoid has wires that polarity matters, if the unit has our universal wire harness our wires are color coded & must be matched to the vehicle wire colors or vehicle will have no assist, this is stated on the "Solenoid warning label" 641280 that's attached to the unit. The pressure & return ports are the same size. If lines are crossed, the upper pinion seal will "blow" due to high pressure system. install pressure line in Top port. Refer to warning label 640100.
UPC: 843613108523
Part Description: Remanufactured Power Steering Rack and Pinion Assembly