201 products about 2002 Dodge Dakota Driveline, Axles & 4WD found
Product Specifications- Notes: 9.25" Ring Gear; w/3.90 Axle Ratio
- Gear Ratio: 3.90
- Item Grade: Standard Replacement
- UPC: 019495515708
- Part Description: 2002 Dodge Dakota OE Solutions Rear Differential Ring And Pinion
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: SQUARE FRAME;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- OE Part Number: 5014097AA
- Shape: Square
- UPC: 081106060792
- Part Description: 2002 Dodge Dakota Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | 4 Cyl 2.5L
- 2002 Dodge Dakota | All Trims | 6 Cyl 3.9L
- 2002 Dodge Dakota | All Trims | 8 Cyl 5.9L
- 2002 Dodge Dakota | All Trims | 8 Cyl 4.7L
Show More Product Specifications- Notes: with 24-1/4" (616 mm) Long Driveshaft;Measurement taken from end of CV Joint Flange Face to end of Flange Face; Supplied as new
- Greasable: Yes
- Length: 24.25"
- Length (mm): 616
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2002 Dodge Dakota Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: 9.25" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- UPC: 019495105473
- Part Description: 2002 Dodge Dakota OE Solutions Rear Differential Ring And Pinion
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Master Kit; 9.25" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487016
- Width: 2.50"
- Part Description: 2002 Dodge Dakota Rear Master Differential Rebuild Kit
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: 8.25" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 6
- Length: 30.26"
- Material: Carbon Steel
- OE Part Number: 52069512AB
- Spline Quantity: 29 Spline
- UPC: 019495471561
- Wheel Lug Quantity: 6
- Part Description: 2002 Dodge Dakota OE Solutions Rear Passenger Side Axle Shaft
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: with 26-3/8" (670 mm) Long Driveshaft;Measurement taken from end of CV Joint Flange Face to end of Flange Face; Supplied as new
- Greasable: Yes
- Length: 26.375"
- Length (mm): 670
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2002 Dodge Dakota Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: 8.25" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 6
- Length: 33.27"
- Material: Carbon Steel
- OE Part Number: 52069513AB
- Spline Quantity: 29 Spline
- UPC: 019495471578
- Wheel Lug Quantity: 6
- Part Description: 2002 Dodge Dakota OE Solutions Rear Driver Side Axle Shaft
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: 12 Bolt;with 9.250in Ring Gear;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 12
- Thickness (in): 0.030"
- UPC: 023913682705
- Part Description: 2002 Dodge Dakota Axle Housing Cover Gasket
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | 4 Cyl 2.5L
- 2002 Dodge Dakota | All Trims | 6 Cyl 3.9L
- 2002 Dodge Dakota | All Trims | 8 Cyl 5.9L
- 2002 Dodge Dakota | All Trims | 8 Cyl 4.7L
Show More Product Specifications- Notes: with Chrysler Axle; with 9.25in Ring Gear
- UPC: 614046887015
- Part Description: 2002 Dodge Dakota Rear Differential Master Bearing Kit
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: w/Limited Slip Differential; w/Chrysler 9.25 Rear Axle
- Inside Diameter: 2.04"; 2.13"
- OE Part Number: 5252506
- Outside Diameter: 3.35"
- Package Contents: 1 Differential Clutch Kit
- Shim Material: Steel
- UPC: 037495175555
- Part Description: 2002 Dodge Dakota Oe Solution Differential Disc Kit Rear Differential
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Std Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499255
- Width: 2.50"
- Part Description: 2002 Dodge Dakota Rear Differential Rebuild Kit
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: 1.378" I.D.
- Bolt Hole Center: 6.629"
- Inside Diameter: 1.378"
- Outside Diameter: 4.980"
- UPC: 085311493598
- Width: 1.941"
- Part Description: 2002 Dodge Dakota Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: with Chrysler Axle; with 8.25in Ring Gear
- Part Description: 2002 Dodge Dakota Rear Differential Master Bearing Kit
Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade;Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2002 Dodge Dakota Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Chrysler Axle; 9.25" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 6
- Length: 30.17"
- Material: Carbon Steel
- OE Part Number: 52069388AB
- Spline Quantity: 31 Spline
- UPC: 019495225461
- Wheel Lug Quantity: 6
- Part Description: 2002 Dodge Dakota OE Solutions Rear Passenger Side Axle Shaft
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: 1.575" I.D.
- Bolt Hole Center: 6.616"
- Inside Diameter: 1.574"
- Outside Diameter: 4.819"
- Pressfit Studs: No
- Studs in Bracket: No
- UPC: 085311418713
- Width: 1.850"
- Part Description: 2002 Dodge Dakota Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Std Design; 9.25" Ring Gear
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495825197
- Part Description: 2002 Dodge Dakota OE Solution Rear Ring And Pinion Bearing Installation Kit
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Incls Bearing & Support; w/1.5748in Bearing ID; w/40mm Bearing ID; Center To Center 2.228in; Center To Center 56.6mm
- Part Description: 2002 Dodge Dakota Driveshaft Center Support Bearing
Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2002 Dodge Dakota Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Repair; w/8.25" & 9.25" Ring Gears
- Inside Diameter: 1.618"
- OE Part Number: 9759R1559, ZZL126175
- Outside Diameter: 2.577"
- UPC: 085311066273
- Width: 1.303"
- Part Description: 2002 Dodge Dakota Rear Axle Shaft Bearing Assembly
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Type: A-1
- Part Description: 2002 Dodge Dakota Differential Bearing
Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: FAG Global# FC67148.5; .830" Wide Brg.
- UPC: 670774196836
- Part Description: 2002 Dodge Dakota Rear Axle Shaft Bearing
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Chrysler Axle; 9.25" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 6
- Length: 33.31"
- Material: Carbon Steel
- OE Part Number: 52069389AB
- Spline Quantity: 31 Spline
- UPC: 019495225454
- Wheel Lug Quantity: 6
- Part Description: 2002 Dodge Dakota OE Solutions Rear Driver Side Axle Shaft
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft;Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft;Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2002 Dodge Dakota Grade Standard U-Joint
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Propeller Shaft
- Additional Contents: Boot Clamp, Snap Ring
- Bolt Circle Diameter: 3.38"
- Bolt Diameter: 0.334"
- Bolt Hole Quantity: 6
- Bolt Thread Sizes: M8 X 1.25
- Color/Finish: Natural
- Grease Included: Yes
- Housing Outside Diameter (in): 3.931"
- Housing Thickness (in): 1.18"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Steel
- OE Part Number: 52105728AD, 52105758AD
- Spline Count: 25
- Spline Diameter (In): 1.009"
- Spline Length (In): 0.903"
- UPC: 019495272434
- Part Description: 2002 Dodge Dakota OE Solutions Front Propeller Shaft Cv Joint Kit
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: 9.25" Ring Gear;4500 Trans.
- Cone ID: 1.875"
- Cone Length: 1"
- Cone Radius: 0.14"
- UPC: 085311057615
- Width: 1"
- Part Description: 2002 Dodge Dakota Rear Outer Axle Shaft Bearing
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: w/9.25" Chrysler Rear Axle
- Color/Finish: Black
- Differential Cover Bolt Count: 12
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: Yes
- Differential Cover/Case Material: Steel
- Gasket or Seal Included: No
- OE Part Number: 4384293AC, 53007762
- UPC: 037495174978
- Part Description: 2002 Dodge Dakota OE Solutions Rear Differential Cover
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 2002 Dodge Dakota Spicer 1310 Series Grade Standard U-Joint
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: w/9.25" Ring Gear
- Cone ID: 1.968"
- Cone Length: 0.866"
- Cone Radius: 0.14"
- OE Part Number: 68003555AA, 68050211AB, 05072506AA, 9759JLM704649, 3723149, 5072506AA
- UPC: 085311057332
- Width: 0.861"
- Part Description: 2002 Dodge Dakota Rear Axle Shaft Bearing
More Info Vehicle Fitment- 2002 Dodge Dakota | All Trims | All Engines