< Back ×
My Vehicle Change Vehicle
1999 Honda Prelude
OEM (Genuine) 1999 Honda Prelude Clip, Hose (36.5MM) (Chuo Spring)
PartNumber: 19511-PH7-003
Product Specifications- Other Names: Clamp, Lower Hose Clamp, Upper Hose Clamp
- Item Dimensions: 2.4 x 1.6 x 0.6 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19512-PY3-003, 19511-P30-004, 19511-P30-003, 19511-PR3-003, 19511-PT0-004, 19511-PY3-003, 19511-PK1-003
- Part Description: 1999 Honda Prelude Clip, Hose (36.5MM) (Chuo Spring)
Vehicle Fitment- 1999 Honda Prelude | Base, Type SH | 4 Cyl 2.2 L GAS
$7.66 MSRP:$10.81You Save: $3.15 (30%)
OEM (Genuine) 1999 Honda Prelude Cap, Radiator (Denso)
PartNumber: 19045-PAA-A01
Product Specifications- Notes: Prelude; Nd; Nd
- Other Names: Radiator Cap
- Item Dimensions: 8.3 x 8.4 x 8.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19045-P08-004, 19045-P08-013, 19045-P08-003, 19045-PY3-013, 19045-P08-014, 19045-PY3-003
- Part Description: 1999 Honda Prelude Cap, Radiator (Denso)
Vehicle Fitment- 1999 Honda Prelude | Base, SE, Si, Si 4WS, Type SH, VTEC | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS
$13.50 MSRP:$19.05You Save: $5.55 (30%)
OEM (Genuine) 1999 Honda Prelude O-Ring (37.2X4.25)
PartNumber: 91314-PR7-A00
Product Specifications- Other Names: Connector Pipe O-Ring
- Item Dimensions: 1.9 x 1.9 x 0.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Honda Prelude O-Ring (37.2X4.25)
Vehicle Fitment- 1999 Honda Prelude | Base, Type SH | 4 Cyl 2.2 L GAS
$3.18 MSRP:$4.48You Save: $1.30 (30%)
Gates® Premium Engine Coolant Thermostat for 1999 Honda Prelude
PartNumber: 33992SProduct Specifications- Notes: 172 Degree; OE Temperature; Seal included
- By-Pass Flange Diameter: 1.19
- Design: Bottom By-Pass
- Height: 2.45
- Height Between Flanges: 1.75
- Height from Flange: .7
- Includes Installation Tool: No
- Jiggle Pin Weep Hole: Yes
- Material: Stainless Steel, Copper
- Number of Gaskets: 0
- Number of Jiggle Pins/Check Valves: 1
- Number of Seals: 1
- Seal Type: O-Ring
- Sealing Flange Outside Diameter: 2.52
- Start to Open Temperature: 172; 78
- UPC: 770075745358
- Part Description: 1999 Honda Prelude Premium Engine Coolant Thermostat
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$31.23
Denso® Engine Coolant Radiator for 1999 Honda Prelude
PartNumber: 221-3200Product Specifications- Notes: w/DENSO Radiator
- Core Height: 13.7500"
- Core Thickness: 0.6250"
- Core Width: 26.5000"
- Inlet Diameter: 1.2500"
- Outlet Diameter: 1.2500"
- UPC: 042511174948
- Part Description: 1999 Honda Prelude Engine Coolant Radiator
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$73.47
Dorman® Engine Cooling Fan Assembly for 1999 Honda Prelude
PartNumber: 620-252Product Specifications- Notes: 5 Blade
- Color: Black
- Connector Quantity: 1
- Connector Type: Male
- Fan Blade Material: Plastic
- Fan Quantity: 1
- Mounting Bracket Included: No
- OE Part Number: 19020-PAA-A01, 19020-PT0-003, 19030-PT0-003, 19015-P0A-003, 19030-P8C-A01
- Package Contents: Radiator Fan Assembly
- Shroud Included: Yes
- Shroud Material: Plastic
- Terminal Quantity: 2
- UPC: 019495214700
- Part Description: 1999 Honda Prelude Engine Cooling Fan Assembly
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$50.93
OEM (Genuine) 1999 Honda Prelude Clip, Oil Pipe
PartNumber: 90635-RV0-003
Product Specifications- Item Dimensions: 1.3 x 1.0 x 0.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90635-PT0-801, 90635-PT0-802
- Part Description: 1999 Honda Prelude Clip, Oil Pipe
Vehicle Fitment- 1999 Honda Prelude | Base, Type SH | 4 Cyl 2.2 L GAS
$1.47 MSRP:$2.06You Save: $0.59 (29%)
Dayco® Engine Coolant Water Pump for 1999 Honda Prelude
PartNumber: DP556Product Specifications- Notes: Timing Belt Driven, Replace Timing Belt w/Pump
- UPC: 036687986917
- Part Description: 1999 Honda Prelude Engine Coolant Water Pump
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$41.09
OEM (Genuine) 1999 Honda Prelude Water Pump (Yamada)
PartNumber: 19200-P13-003
Product Specifications- Notes: Prelude
- Other Names: Water Pump
- Item Dimensions: 7.1 x 5.9 x 3.7 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19200-P13-000
- Part Description: 1999 Honda Prelude Water Pump (Yamada)
Vehicle Fitment- 1999 Honda Prelude | Base, Type SH, VTEC | 4 Cyl 2.2 L GAS
$137.24 MSRP:$193.85You Save: $56.61 (30%)
TYC® Engine Coolant Radiator for 1999 Honda Prelude
PartNumber: 1494Product Specifications- Notes: Accessories Incld: Pressure cap; Bottom Header: 1 7/8" x 27 7/16"; Core Size: 13 3/4" x 26 11/16" x 5/8"; Manufactured Material: Plastic/Alum; Remarks: DENSO TYPE; Rows: 1; Top Header: 1 15/16" x 27 7/16"; USA BUILT
- Accessories Included: Pressure cap
- Bottom Header: 2.02x27.66
- Core Height (in): 26.69
- Core Length (in): 13.78
- Core Material: Aluminum
- Core Thickness (in): 0.63
- Engine Oil Cooler Included: No
- Fin Count (every 4"): 73: 73
- Fin Wave Height (in): 0.31
- Find Wave Pitch: 2.8
- Flow Configuration: Downflow
- Inlet Connection Type: Hose Clamp
- Inlet Diameter (In): 1.26
- No. Of Rows: 1
- OE Part Number: 19010-P5M-903, AC3010112, HO3010142, 19010-P0H-A51, 19010-P0F-J52
- Outlet Connection Type: Hose Clamp
- Outlet Diameter (in): 1.26
- Remarks: DENSO TYPE
- TOC Distance (IN): 12.80
- Toc Inlet Diameter (in): 0.39
- Toc Inlet Type: Tube fitting
- TOC Outlet Diameter (IN): 0.39
- Toc Outlet Type: Tube fitting
- Top Header: 1.43x27.66
- Total Fin Row Count: 68
- Total Tube Count: 67
- Transmission Oil Cooler Included: Yes
- Transmission Oil Cooler Type: Concentric Oil Cooler
- Tube Count (Every 4"): 10: 10
- Tube Width x Height: 16x2
- UPC: 762405250670
- Part Description: 1999 Honda Prelude Engine Coolant Radiator
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$79.73
Delphi® Coolant Temperature Sensor for 1999 Honda Prelude
PartNumber: TS10180Product Specifications- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Round
- Mounting Type: Threaded Nut
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 689604109373
- Wiring Harness Included: No
- Part Description: 1999 Honda Prelude Coolant Temperature Sensor
Vehicle Fitment- 1999 Honda Prelude | Base | All Engines
- 1999 Honda Prelude | Type SH | All Engines
$24.89
Gates® Engine Coolant Molded Radiator Hose for 1999 Honda Prelude
PartNumber: 22181Product Specifications- Branch Quantity: 0
- Contains Spring: No
- End 1 Inside Diameter: 1.2 in
- End 2 Inside Diameter: 1.2 in
- Material: EPDM, Plastic
- Modular Hose: No
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 32658
- UPC: 072053175639
- Part Description: 1999 Honda Prelude Engine Coolant Molded Radiator Hose
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$25.16
Dorman® Engine Cooling Fan Assembly for 1999 Honda Prelude
PartNumber: 620-200Product Specifications- Notes: 4 Blade
- Color: Black
- Connector Quantity: 1
- Connector Type: Male
- Fan Blade Material: Plastic
- Fan Quantity: 1
- Mounting Bracket Included: No
- OE Part Number: 19015-P0A-003, 19015-P0A-004, 19016-P0A-305, 19020-P5M-004, 19030-P5M-004
- Package Contents: Radiator Fan Assembly
- Shroud Included: Yes
- Shroud Material: Plastic
- Terminal Quantity: 2
- UPC: 019495032656
- Part Description: 1999 Honda Prelude Engine Cooling Fan Assembly
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$40.30
Gates® Cooling System Tester Adapter for 1999 Honda Prelude
PartNumber: 31428Product Specifications- Notes: w/Toyo Rad.
- Quantity: 1 Piece
- UPC: 072053433647
- Part Description: 1999 Honda Prelude Cooling System Tester Adapter
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$26.09
Four Seasons® Engine Cooling Fan for 1999 Honda Prelude
PartNumber: 76179Product Specifications- Blade Material: Plastic
- Blade Type: Rigid
- Connector Gender: Female
- Connector qty: 1
- Connector Shape: Rectangle
- Connector Type: 2 wire lead w/ Connector
- Electrical or Mechanical: Electrical
- Fan 1 Blade Quantity: 5
- Fan Clutch Mounted: Fan clutch not mounted within the assembly.
- Fan Quantity: 1
- Height IN: 15.750
- Height MM: 374.650
- Housing Finish: Black
- Hub Bolt Hole Quantity: OE Mount
- Material: Plastic / Metal
- Motor Type A: Radiator Fan Assembly
- Mount Location: Radiator Fan
- Mount Type: OE mount
- Mounting Hardware: Not Included
- O.E. Replacement: Yes
- Package Depth IN: 20.750
- Package Depth MM: 527.050
- Package Height IN: 6.500
- Package Height MM: 165.100
- Package Length IN: 17.750
- Package Length MM: 450.850
- Performance Rated: Yes
- Shroud Included: Included
- Shroud Material: Plastic
- Style: Radiator Fan
- Terminal Gender: Male
- Terminal Quantity: 2
- UPC: 096361761797
- Voltage: 12
- Width IN: 14.000
- Part Description: 1999 Honda Prelude Engine Cooling Fan
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$141.50
Airtex® Engine Coolant Water Pump for 1999 Honda Prelude
PartNumber: AW9273Product Specifications- Notes: Timing Belt Should Be Replaced with Water Pump
- Fan Clutch Included: No
- Housing Material: Aluminum
- Hub Height: 56.00 mm
- Impeller Material: Steel
- Impeller Rotation: Reverse
- Impeller Vane Quantity: 7
- Includes Back Housing: No
- Mounting Hole Quantity: 5
- Pulley Outside Diameter: 66.29 mm
- Water Pump Drive Type: Timing Belt
- Part Description: 1999 Honda Prelude Engine Coolant Water Pump
Vehicle Fitment- 1999 Honda Prelude | Base | 4 Cyl 2.2L
- 1999 Honda Prelude | Type SH | 4 Cyl 2.2L
$41.50
OEM (Genuine) 1999 Honda Prelude Gasket, Thermostat Case
PartNumber: 19313-PT0-000
Product Specifications- Item Dimensions: 2.3 x 1.7 x 0.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Honda Prelude Gasket, Thermostat Case
Vehicle Fitment- 1999 Honda Prelude | Base, Type SH | 4 Cyl 2.2 L GAS
$2.48 MSRP:$3.49You Save: $1.01 (29%)OEM (Genuine) 1999 Honda Prelude Gasket, Thermostat Case
PartNumber: 19313-PT0-000Product Specifications- Item Dimensions: 2.3 x 1.7 x 0.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Honda Prelude Gasket, Thermostat Case
Vehicle Fitment- 1999 Honda Prelude | Base, Type SH | 4 Cyl 2.2 L GAS
$2.48 MSRP:$3.49You Save: $1.01 (29%)
TYC® Passenger Side Engine Cooling Fan Motor for 1999 Honda Prelude
PartNumber: 630130Product Specifications- Notes: CFM Type: Condenser
- Cfm Type: Condenser
- OE Part Number: 38616-PAA-A01, HO3116104
- UPC: 762405220123
- Part Description: 1999 Honda Prelude Passenger Side Engine Cooling Fan Motor
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$31.94
STANT® 32 mm x 16 mm Cooling System Adapter for 1999 Honda Prelude
PartNumber: 12027Product Specifications- Notes: w/Toyo Rad.
- Quantity: 1 Piece
- Size: 32 mm x 16 mm
- UPC: 033342020276
- Part Description: 1999 Honda Prelude 32 mm x 16 mm Cooling System Adapter
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$44.43
GMB® Engine Coolant Water Pump for 1999 Honda Prelude
PartNumber: 135-1330Product Specifications- Housing Material: Aluminum
- Hub Height: 1.87 in
- Hub Pilot Diameter: 2.55 in
- Impeller Material: Metal
- Impeller Rotation: Reverse
- Pulley Type: Timing Belt
- UPC: 826732437293
- Water Pump Drive Type: Timing Belt
- Part Description: 1999 Honda Prelude Engine Coolant Water Pump
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$35.23
Dayco® Engine Coolant Curved Radiator Hose for 1999 Honda Prelude
PartNumber: 71478Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1 3/16
- End 2 Inside Diameter: 1 3/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Trunk Height: 26
- UPC: 038244141982
- Part Description: 1999 Honda Prelude Engine Coolant Curved Radiator Hose
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$13.97
Spectra Premium® Complete Radiator for 1999 Honda Prelude
PartNumber: CU1494Product Specifications- Core Material: Aluminum
- Height: 13 3/4"
- Inlet: 1 1/4"
- Inlet Header: 27 1/4" x 1 5/8"
- Outlet: 1 1/4"
- Outlet Header: 27 1/4" x 1 5/8"
- Row: 1
- Tank Material: Plastic
- Thickness: 5/8"
- TOC: Concentric; 1" Diameter; 12 13/16" Distance
- UPC: 671607705515
- Width: 26 5/16"
- Part Description: 1999 Honda Prelude Complete Radiator
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$64.28
Four Seasons® Auxiliary Engine Cooling Fan for 1999 Honda Prelude
PartNumber: 37140Product Specifications- Notes: Universal Fit Super Duty Electric Puller Primary Fan. Incls mounting hardware. Controls not Incld.
- Material: Plastic
- Performance Rated: Yes
- SDS Required: No (135233618)
- UPC: 096361089945
- Part Description: 1999 Honda Prelude Auxiliary Engine Cooling Fan
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$91.74
CSF® Engine Coolant Radiator for 1999 Honda Prelude
PartNumber: 2605Product Specifications- Notes: OE Style Design; Use Mini, 16 psi Cap; Denso/Toyo
- Bottom Hose Fitting (in): 1 1/4 Right
- Box Height (in): 5 4/16
- Box Length (in): 29 1/4
- Box Weight (lbs): 8
- Box Width (in): 20
- Core Length: 13 3/4
- Core Material: Aluminum
- Core Thickness: 5/8
- Core Width: 26 11/16
- Cross-flow/ Down-flow: Down Flow
- Csf Cap Number: 4514
- Hazardous Material: No
- Inlet Length (in): 27 1/4
- Inlet Width (in): 1 1/16
- No. Of Rows: 1
- OE Part Number: 8011896, 19010-P0H-A51, 19010-P5M-901, 19010-P0F-J02, 19010-P0A-004, CU1494, 19010-P0F-J03, 19010-P0A-902, 19010-P5M-004, 221-3200, 8011494, 19010-P0H-A01, 19010-P0F-J52, 19010-P5M-902
- Oil Cooler (in): 12 13/16 (high-effeciency Concentric Type)
- Outlet Length(in): 27 1/4
- Outlet Width: 1 5/8
- Radiator Cap Supplied: Yes
- Tank Material: Plastic
- Tech Note: O.E.M. style Plastic tanks & Aluminum core;Multifit model supplied with pressure cap.
- Top Hose Fitting (in): 1 1/4 Centre
- UPC: 710353026052
- Part Description: 1999 Honda Prelude Engine Coolant Radiator
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$64.72
Gates® OE Type Engine Coolant Thermostat for 1999 Honda Prelude
PartNumber: 33877Product Specifications- Notes: 170 Degree; Alternate Temperature
- By-Pass Flange Diameter: 1.2"
- Depth from Flange: 1.71"
- Design: Bottom By-Pass
- Flange Diameter: 2.51"
- Height from Flange: 0.74"
- Includes Installation Tool: No
- Jiggle Pin/Check Valve: No
- Material: Steel, Copper
- Number of Gaskets: 0
- Number of Seals: 0
- OE Comparison Rating: OE Performance
- Temperature (C): 77
- Temperature (F): 170
- Total Height: 2.45"
- Type: OE Type Thermostat
- UPC: 072053062830
- Part Description: 1999 Honda Prelude OE Type Engine Coolant Thermostat
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$20.87
Walker Products® Engine Coolant Temperature Sensor for 1999 Honda Prelude
PartNumber: 211-1015Product Specifications- UPC: 724620057175
- Part Description: 1999 Honda Prelude Engine Coolant Temperature Sensor
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
$11.47
Hella® Engine Coolant Temperature Sensor for 1999 Honda Prelude
PartNumber: 009107511Product Specifications- Notes: Technology w/Vision
- Part Description: 1999 Honda Prelude Engine Coolant Temperature Sensor
Vehicle Fitment- 1999 Honda Prelude | All Trims | 4 Cyl 2.2L
- 1999 Honda Prelude | Base | All Engines
- 1999 Honda Prelude | Type SH | All Engines
$10.25
Dayco® Engine Coolant Curved Radiator Hose for 1999 Honda Prelude
PartNumber: 70806Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1 5/16
- End 2 Inside Diameter: 1 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- OE Part Number: 459950, F22015186, F20215186, MB007222, MB660064, H0061028, MB845901, 2150110W00, 4401981, MB221722, 10263256, 2541134070, 4401663, 19501P5M000, 2541128251, 8942206941, 2541128200, B61P15186, 2541138040, 215016P000, MB007403, 2541133370, 2541228150, 19501
- SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Trunk Height: 11
- UPC: 038244135714
- Part Description: 1999 Honda Prelude Engine Coolant Curved Radiator Hose
Vehicle Fitment- 1999 Honda Prelude | All Trims | All Engines
$12.67OEM (Genuine) 1999 Honda Prelude Thermostat Assembly (Fuji Thompson)
PartNumber: 19301-P13-305
Product Specifications- Notes: Prelude; Fuji;Prelude; Nippon; Fuji;Nippon
- Item Dimensions: 4.3 x 2.8 x 2.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19301-P13-306, 19301-P13-000, 19301-P13-010
- Part Description: 1999 Honda Prelude Thermostat Assembly (Fuji Thompson)
Vehicle Fitment- 1999 Honda Prelude | Base, Type SH, VTEC | 4 Cyl 2.2 L GAS
$43.82 MSRP:$61.90You Save: $18.08 (30%)
1-30 of 148 Results
< Previous
12345
Next >