166 products about 1997 Toyota 4Runner Driveline, Axles & 4WD found
Product Specifications- Location: Driver Side; Passenger Side
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1997 Toyota 4Runner Case O-Ring
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$4.90 MSRP: $7.04
You Save: $2.14 (31%)
Product Specifications- Notes: Outer; 4-Runner; Outer
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.2 x 3.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90313-48005
- Part Description: 1997 Toyota 4Runner Axle Shaft Oil Seal
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, DLX, Limited, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$7.14 MSRP: $10.27
You Save: $3.13 (31%)
Product Specifications- Notes: Inner; 4-Runner; Inner
- Location: Driver Side; Passenger Side
- Item Dimensions: 2.9 x 2.9 x 0.4 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90310-50005, 90310-50039, 90310-50001, 90311-50030, 90310-50032
- Part Description: 1997 Toyota 4Runner Axle Shaft Oil Seal
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, DLX, Limited, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$6.81 MSRP: $9.79
You Save: $2.98 (31%)
Product Specifications- Notes: 4-Runner; Right
- Other Names: Output Shaft Seal, Tube Seal
- Item Dimensions: 13.3 x 11.4 x 2.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1997 Toyota 4Runner Tube Oil Seal
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, Limited, Sport, SR5, Trail | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
$16.25 MSRP: $23.39
You Save: $7.14 (31%)
Product Specifications- Notes: 2WD; 4WD, Outer; 4-Runner
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.3 x 3.3 x 0.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1997 Toyota 4Runner Hub Assembly Seal
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$23.97 MSRP: $34.54
You Save: $10.57 (31%)
Product Specifications- Notes: 2WD; 4WD
- Location: Driver Side; Passenger Side
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1997 Toyota 4Runner Inner Seal Snap Ring
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$8.73 MSRP: $12.56
You Save: $3.83 (31%)
Product Specifications- Notes: 2WD; 4WD; 4-Runner; All; 4-Runner
- Location: Driver Side; Passenger Side
- Other Names: Bearing, Front Wheel Bearing, Wheel Bearing
- Item Dimensions: 6.0 x 5.9 x 2.6 inches
- Item Weight: 3.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90080-36071, 90369-54001
- Part Description: 1997 Toyota 4Runner Bearing
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$108.91 MSRP: $158.23
You Save: $49.32 (32%)
Product Specifications- Notes: 4WD, Inner
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.1 x 3.1 x 0.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1997 Toyota 4Runner Hub Assembly Seal
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$57.43 MSRP: $82.72
You Save: $25.29 (31%)
Product Specifications- Actuator Design: Electronic
- Color: Black; Gray
- Connector/Terminal Configuration: Blade
- Grade Type: Standard
- Material: Aluminum; Carbon Steel
- Package Contents: 1 Differential Lock Actuator
- Terminal Quantity: 6
- Terminal Type: Pin
- UPC: 019495547488
- Part Description: 1997 Toyota 4Runner OE Solutions Rear Differential Lock Actuator
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: Std Kit; w/8.00" Ring Gear w/o Locking Diff.:;Std Kit; w/8.00" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311550567
- Width: 2.50"
- Part Description: 1997 Toyota 4Runner Rear Differential Rebuild Kit
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | 4 Cyl 2.7L
- 1997 Toyota 4Runner | All Trims | 6 Cyl 3.4L
Product Specifications- Notes: 4-Runner; All
- Other Names: Pinion Seal
- Item Dimensions: 2.9 x 3.0 x 0.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90311-38035, 90311-38133
- Part Description: 1997 Toyota 4Runner Seal
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, DLX, Limited, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$8.21 MSRP: $11.81
You Save: $3.60 (31%)
Product Specifications- Notes: 4-Runner; All
- Other Names: Pinion Seal
- Item Dimensions: 2.9 x 3.0 x 0.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90311-38035, 90311-38133
- Part Description: 1997 Toyota 4Runner Seal
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, DLX, Limited, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$8.21 MSRP: $11.81
You Save: $3.60 (31%)
Product Specifications- Bolt Hole Quantity: 4
- Color: Gray
- Gasket or Seal Included: No
- Installation Hardware Included: Yes
- Material: Aluminum
- Mounting Hardware Included: Yes
- Mounting Hole Quantity: 4
- Package Contents: Housing; Access Plug; Bolts
- UPC: 019495554820
- Part Description: 1997 Toyota 4Runner 4Wd Axle Actuator Housing
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: Perf Grade; Grease Fitting in Center of Cross
- Bearing Cap Diameter Axis 1 (in): 1.1400
- Bearing Cap Diameter Axis 2 (in): 1.1400
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style
- UPC: 083286350212
- Part Description: 1997 Toyota 4Runner Universal Joint
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: w/ Locking Diff.
- Cone ID: 2.952"
- Cone Length: 0.809"
- Cone Radius: 1.75"
- Cup Length: 0.629"
- Cup Radius: 0.08"
- Outside Diameter: 4.133"
- UPC: 085311531719
- Width: 0.811"
- Part Description: 1997 Toyota 4Runner Rear Driver Side Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: 2WD; 4WD; 4-Runner
- Location: Driver Side; Passenger Side
- Other Names: Bushing, Upper Control Arm Bushing
- Item Dimensions: 2.9 x 2.4 x 2.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1997 Toyota 4Runner Bushings
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$42.04 MSRP: $60.57
You Save: $18.53 (31%)
Product Specifications- Carrier Main Cap Support: No
- Color/Finish: Green
- Differential Cover Bolt Count: 0
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: Yes
- Differential Cover/Case Material: Steel
- Gasket or Seal Included: No
- Material: Steel
- OE Part Number: 42110-35530, 42110-35531, 42110-35540, 42110-35541, 42110-35551, 42110-35561, 42110-35570, 42110-35580, 42110-35590, 42110-35600, 42110-35621, 42110-35680, 42110-35681, 42110-35700, 42110-35701, 42110-35710, 42110-35711, 42110-35850, 42110-35860
- Package Contents: 1 Differential Cover with Fill Plug
- UPC: 037495954006
- Part Description: 1997 Toyota 4Runner OE Solutions Differential Cover
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: with 46-7/8" (1191 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face;Supplied as new
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length (in): 46.875
- Length (mm): 1191
- Measurement Method: Measurement Taken from End of Flange Face to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.71
- Tubing Outer Diameter (mm): 68.9
- Part Description: 1997 Toyota 4Runner Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | 4 Cyl 2.7L
Product Specifications- Notes: Std Grade; Grease Fitting in Center of Cross
- Bearing Cap Axis 1 Diameter: 1.14
- Bearing Cap Axis 2 Diameter: 1.14
- Bearing Cap Type: Grooved
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.05
- Length Axis 2: 2.05
- Lock Ring Location: Internal
- Lube Fitting Location: Grease Fitting in Center of Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286000216
- Weight (Gross Pounds): 1.30
- Width (Inch): 3.50
- Part Description: 1997 Toyota 4Runner Grade Standard U-Joint
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Drive Shaft Diameter (In): 3"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: No
- Length: 62.75"
- Material: Steel
- OE Part Number: 371103D070
- Outside Diameter: 3"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic
- UPC: 037495118286
- Wall Thickness: 0.065"
- Part Description: 1997 Toyota 4Runner OE Solutions Rear Driveshaft
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | 6 Cyl 3.4L
Product Specifications- Notes: 2.7 Liter, 4WD, W/Rear Differential Lock; 4-Runner; 4 Cylinder; 4WD; W/Locking Differential
- Other Names: Carrier Assembly, Differential Carrier
- Replaces: 41110-3D010
- Part Description: 1997 Toyota 4Runner Carrier Assembly
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
$2412.21 MSRP: $3557.07
You Save: $1144.86 (33%)
Product Specifications- Notes: 7.50" Ring Gear
- Cone ID: 1.378"
- Cone Length: 1.220"
- Cone Radius: 0.078"
- Cup Length: 0.984"
- Cup Radius: 0.059"
- Outside Diameter: 3.150"
- UPC: 085311070898
- Width: 1.289"
- Part Description: 1997 Toyota 4Runner Front Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: Uni-Fit; Joint Dia 3.5"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.5"
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: 1997 Toyota 4Runner OE Solutions Front Inner Cv Joint Boot Kit
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: 3.4 Liter, 4WD, W/4.100 Gear Ratio W/Rear Diff. Lock
- Other Names: Differential Carrier
- Replaces: 41110-3D030
- Part Description: 1997 Toyota 4Runner Differential Carrier
More Info Vehicle Fitment- 1997 Toyota 4Runner | Limited, SR5 | 6 Cyl 3.4 L GAS
$2131.33 MSRP: $3142.90
You Save: $1011.57 (33%)
Product Specifications- Notes: 7.50" Ring Gear
- Cone ID: 1.1810"
- Cone Length: 0.7480"
- Cone Radius: 0.0591"
- Cup Length: 0.6299"
- Cup Radius: 0.0591"
- Outer Diameter: 2.8350"
- UPC: 085311070782
- Width: 0.8170"
- Part Description: 1997 Toyota 4Runner Front Passenger Side Outer Wheel Bearing
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: Uni-Fit; Joint Dia 3.44";Uni-Fit; Joint Dia 3.44"; Packaging Type: Box; Pkg Quantity: 1
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: 1997 Toyota 4Runner OE Solutions Front Outer Cv Joint Boot Kit
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 24-1/4" (616 mm) Long Driveshaft
- Greasable: Yes
- Length: 24.25"
- Length (mm): 615,95
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1997 Toyota 4Runner Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | 4 Cyl 2.7L
Product Specifications- Notes: Packaging Type: Box
- Filter/Vent Diameter (in): 0.204 In.
- Height: 1.69 In.
- Inlet Flange Diameter (in): 0.36 In.
- Inlet Flange Length (In): 0.86 In.
- Installation Hardware Included: t Required
- Item Grade: Standard Replacement
- Material: Metal and Plastic
- OE Part Number: 90930-03136
- UPC: 019495451792
- Part Description: 1997 Toyota 4Runner OE Solution Front Axle Vent
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: Brute Force Greaseable
- Inside Lock-Up 1: 2.047"
- Outer Diameter: 1.142"
- UPC: 085311168557
- Part Description: 1997 Toyota 4Runner Rear Greaseable U Joint
More Info Vehicle Fitment- 1997 Toyota 4Runner | All Trims | All Engines
Product Specifications- Notes: 2.7 Liter, 2WD, W/Manual Trans & 16" Wheels;2.7 Liter, 4WD, W/15" Wheel;3.4 Liter, 2WD, W/16" Wheel;3.4 Liter, 4WD, W/4.100 Gear Ratio W/O Rear Diff. Lock; 4-Runner; 4 Cylinder; 2WD; Manual Trans; W/16" Wheel;4-Runner; 4 Cylinder; 4WD; W/O Locking Differential; W/O 16" Wheel;4-Runner; 6 Cylinder; 2WD; W/16" Wheel;4-Runner; 6 Cylinder; 4WD; W/O Locking Differential
- Item Dimensions: 16.8 x 11.6 x 11.3 inches
- Item Weight: 66.30 Pounds
- Replaces: 41110-35890
- Part Description: 1997 Toyota 4Runner Carrier Assembly
More Info Vehicle Fitment- 1997 Toyota 4Runner | Base, DLX, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$1391.03 MSRP: $2051.23
You Save: $660.20 (33%)