Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
Hose Port: O-Ring
Housing Material: Aluminum
Import or Domestic: Import
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Splined
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Hose Barb
Reservoir: Without
Thread Size: M16 x 1.5
Part Description: Remanufactured Power Steering Pump w/o Reservoir
Notes: The operating temperature within the Eng compartment Exc eeds the tolerance of the OE seals throughout the Hyd system. Over time this results in the Hyd fluid "varnishing" within the steering unit, Hyd lines & pump. This "varnishing" results in contamination throughout the system. Maval utilizes high temperature seals & recommends a complete replacement of the steering system in order to avoid contamination related problems. Refer to instruction sheet packet 656080. Unit it is equipped w/a electronic solenoid, this part is Incld.
Notes: Our Magnetic In-Line Filter measures 2 1/4" X 5" w/12 mm Outer Dia Neck (Designed For Use w/1/2" ID Hose) & Will Only Fit Applications Where Space Allows.
E-Waste: No
Filter Material: Aluminum
Filter Type: Inline
Hose Inner Diameter (in): 1/2"
Housing Material: Aluminum
Inlet Diameter: 0.527"
Installation Hardware Included: Hose Clamps (2)
Outlet Diameter: 0.527"
Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Aluminum Housing
E-Waste: No
Filter Material: Aluminum
Filter Type: Inline
Hose Inner Diameter (in): 3/8"
Housing Material: Aluminum
Inlet Diameter: 0.395"
Installation Hardware Included: Hose Clamps (2)
Outlet Diameter: 0.397"
Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Plastic Housing