147 products about 1996 Toyota T100 Driveline, Axles & 4WD found
Product Specifications- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota T100 Case O-Ring
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$4.90 MSRP: $7.04
You Save: $2.14 (31%)
Product Specifications- Notes: Outer; T100; Outer
- Item Dimensions: 3.2 x 3.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90313-48005
- Part Description: 1996 Toyota T100 Axle Shaft Oil Seal
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$7.14 MSRP: $10.27
You Save: $3.13 (31%)
Product Specifications- Notes: Inner; T100; Inner
- Item Dimensions: 2.9 x 2.9 x 0.4 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90310-50005, 90310-50039, 90310-50001, 90311-50030, 90310-50032
- Part Description: 1996 Toyota T100 Axle Shaft Oil Seal
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$6.81 MSRP: $9.79
You Save: $2.98 (31%)
Product Specifications- Notes: T100
- Other Names: Pinion Seal
- Item Dimensions: 2.9 x 3.0 x 0.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90311-38035, 90311-38133
- Part Description: 1996 Toyota T100 Seal
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$8.21 MSRP: $11.81
You Save: $3.60 (31%)
Product Specifications- Notes: T100
- Other Names: Pinion Seal
- Item Dimensions: 2.9 x 3.0 x 0.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90311-38035, 90311-38133
- Part Description: 1996 Toyota T100 Seal
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$8.21 MSRP: $11.81
You Save: $3.60 (31%)
Product Specifications- Drive Shaft Diameter (In): 2.5"
- Drive Shaft Wall Thickness (In): 0.083"
- Greaseable Drive Shaft: Yes
- Length: 66.5"
- Material: Steel
- OE Part Number: 37110-34050, 37110-3D470
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Manual
- UPC: 037495118217
- Wall Thickness: 0.083"
- Part Description: 1996 Toyota T100 OE Solutions Rear Driveshaft
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | 6 Cyl 3.4L
Product Specifications- Notes: Master Kit; w/ 8.4" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311550611
- Width: 2.50"
- Part Description: 1996 Toyota T100 Rear Master Differential Rebuild Kit
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 37-1/4" (946 mm) Long Driveshaft
- Greasable: Yes
- Length: 37.25"
- Length (mm): 946,15
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1996 Toyota T100 Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | 6 Cyl 3.4L
Product Specifications- Notes: BEARING ID / BORE: 1.1811" / 30 MM;CENTERLINE: 0.50" / 13 MM;MOUNT WIDTH: 6.00" / 152 MM;
- Inside Diameter: 1.181"
- OE Part Number: 37230-35130
- UPC: 081106060747
- Part Description: 1996 Toyota T100 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | 6 Cyl 3.4L
Product Specifications- Notes: T100; 4WD
- Other Names: Center Bearing
- Item Dimensions: 15.8 x 11.3 x 3.1 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 37230-0K010, 37230-0K011, 37230-34020
- Part Description: 1996 Toyota T100 Center Bearing
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
$202.78 MSRP: $294.59
You Save: $91.81 (32%)
Product Specifications- Notes: Standard Kit; w/ 8.4" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311550598
- Width: 2.50"
- Part Description: 1996 Toyota T100 Rear Differential Rebuild Kit
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: with 23-1/4" (590 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face
- Greasable: Yes
- Length: 23.25"
- Length (mm): 590
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1996 Toyota T100 Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | 6 Cyl 3.4L
Product Specifications- Notes: BEARING ID / BORE: 1.1811" / 30 MM;CENTERLINE: 0.50" / 13 MM;MOUNT WIDTH: 6.00" / 152 MM;
- Inside Diameter: 1.181"
- OE Part Number: 37230-35120
- UPC: 081106060730
- Part Description: 1996 Toyota T100 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | 4 Cyl 2.7L
- 1996 Toyota T100 | All Trims | 6 Cyl 3.4L
Product Specifications- UPC: 656591052265
- Part Description: 1996 Toyota T100 Driveshaft Center Support
Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Bracket Material: Steel
- Inside Diameter: 1.181"
- Installation Hardware Included: Not Required
- Installation Instructions Included: No
- Mounting Bracket Included: Yes
- Mounting Hole Quantity: 2
- OE Part Number: 37230-35130
- Support Bearing Type: Housing Mounted Bearing
- UPC: 019495300069
- Width: 6"
- Part Description: 1996 Toyota T100 OE Solutions Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: 4WD; T100; 6 Cylinder; 4WD; Auto Trans
- Other Names: Carrier Assembly, Differential Carrier
- Item Dimensions: 29.9 x 26.1 x 18.4 inches
- Item Weight: 78.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota T100 Carrier Assembly
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$1649.90 MSRP: $2432.98
You Save: $783.08 (33%)
Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 6
- Length: 32.08"
- Material: Carbon Steel
- OE Part Number: 4231134040
- Spline Quantity: 30 Spline
- UPC: 019495453017
- Wheel Lug Quantity: 6
- Part Description: 1996 Toyota T100 OE Solutions Rear Passenger Side Axle Shaft
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | 6 Cyl 3.4L
Product Specifications- Notes: Perf Grade; Grease Fitting in Center of Cross;Perf Grade; Inside Lock Rings; Grease Fitting in Center of Cross
- Bearing Cap Diameter Axis 1 (in): 1.1400
- Bearing Cap Diameter Axis 2 (in): 1.1400
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style
- UPC: 083286350212
- Part Description: 1996 Toyota T100 Universal Joint
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: Uni-Fit; Joint Dia 3.5";Uni-Fit; Joint Dia 3.5"; Packaging Type: Box; Pkg Quantity: 1
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: 1996 Toyota T100 OE Solutions Front Inner Cv Joint Boot Kit
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- UPC: 656591052258
- Part Description: 1996 Toyota T100 Driveshaft Center Support
Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: Includes Bearing and Support
- Part Description: 1996 Toyota T100 Driveshaft Center Support Bearing
Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: Bearing & Support
- Bolt Hole Center: 5.900"
- Inside Diameter: 1.181"
- Outside Diameter: 6.875"
- UPC: 085311227933
- Width: 2.150"
- Part Description: 1996 Toyota T100 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: T100; 6 Cylinder; 4WD; Manual Trans
- Other Names: Carrier Assembly, Differential Carrier
- Item Dimensions: 17.5 x 12.1 x 12.7 inches
- Item Weight: 69.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota T100 Carrier Assembly
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, SR5 | 6 Cyl 3.4 L GAS
$1649.90 MSRP: $2432.98
You Save: $783.08 (33%)
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; Outside Lock Rings
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 1996 Toyota T100 Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: Uni-Fit; Joint Dia 3.44"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.44"
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: 1996 Toyota T100 OE Solutions Front Outer Cv Joint Boot Kit
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- ABS Ring Included: No
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 24 5/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 26
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 1996 Toyota T100 Remanufactured CV Axle Assembly
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: Packaging Type: Box
- Filter/Vent Diameter (in): 0.2"
- Height: 1.2"
- Inlet Flange Diameter (in): 0.4"
- Inlet Flange Length (In): 0.04"
- Item Grade: Standard Replacement
- Material: Steel
- OE Part Number: 90930-03031
- UPC: 037495103701
- Part Description: 1996 Toyota T100 OE Solution Rear Axle Vent
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: 2WD; T100; 6 Cylinder; 2WD; 1 Ton
- Other Names: Carrier Assembly
- Item Dimensions: 31.2 x 21.0 x 20.8 inches
- Item Weight: 98.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Toyota T100 Carrier Assembly
More Info Vehicle Fitment- 1996 Toyota T100 | Base, DLX, DX, One-Ton DLX, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
$1649.90 MSRP: $2432.98
You Save: $783.08 (33%)
Product Specifications- Notes: 7.50" Ring Gear
- Cone ID: 1.378"
- Cone Length: 1.220"
- Cone Radius: 0.078"
- Cup Length: 0.984"
- Cup Radius: 0.059"
- Outside Diameter: 3.150"
- UPC: 085311070898
- Width: 1.289"
- Part Description: 1996 Toyota T100 Front Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines
Product Specifications- Notes: Std Grade; Grease Fitting in Center of Cross;Std Grade; Inside Lock Rings; Grease Fitting in Center of Cross
- Bearing Cap Axis 1 Diameter: 1.14
- Bearing Cap Axis 2 Diameter: 1.14
- Bearing Cap Type: Grooved
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.05
- Length Axis 2: 2.05
- Lock Ring Location: Internal
- Lube Fitting Location: Grease Fitting in Center of Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286000216
- Weight (Gross Pounds): 1.30
- Width (Inch): 3.50
- Part Description: 1996 Toyota T100 Grade Standard U-Joint
More Info Vehicle Fitment- 1996 Toyota T100 | All Trims | All Engines