31 products about 1996 Ford Mustang Wheel Hubs, Bearings, Seals & Components found
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Dust Cap, Grease Cap
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Ford Mustang Dust Cap
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$30.90 MSRP: $45.18
You Save: $14.28 (32%)
Product Specifications- Bolt Circle Diameter A: 4.50"
- Bolt Hole Size: 0.406
- Bolt Size: 1/2-20UNRF
- Flange Diameter: 5.4720"
- Inner Diameter: 1.3570"
- Sensor Ring: Yes
- UPC: 085311191548
- Wheel Pilot Diameter: 2.7750"
- Part Description: 1996 Ford Mustang Front Driver Side Wheel Bearing And Hub Assembly
More Info Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
Product Specifications- Notes: Axle Repair Bearing
- Part Description: 1996 Ford Mustang Rear Passenger Side Repair Wheel Bearing
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | SVT Cobra | All Engines
- 1996 Ford Mustang | GT | All Engines
Show More Product Specifications- Notes: Wheel Hub Assy; Axle Nut Torque Spec: N/R
- Flange Diameter (Inch): 5.475
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.15
- Material: Steel
- Product Condition: New
- Stud Quantity: 5
- UPC: 029175925246
- Wiring Harness Included: No
- Part Description: 1996 Ford Mustang WHEEL BEARING AND HUB ASSEMBLY
More Info Vehicle Fitment- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Product Specifications- Notes: Mustang
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: E5SZ-1225-A
- Part Description: 1996 Ford Mustang Axle Housing Bearing
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, L, LX, Mach 1, SVO, SVT Cobra, SVT Cobra 10th Anniversary, SVT Cobra R | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$14.83 MSRP: $21.67
You Save: $6.84 (32%)
Product Specifications- Item Dimensions: 3.3 x 1.3 x 3.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: F67Z-1177-AC
- Part Description: 1996 Ford Mustang Axle Housing Seal
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GTS, L, LX, SVT Cobra, SVT Cobra R | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$13.74 MSRP: $23.27
You Save: $9.53 (41%)
Product Specifications- Notes: Standard Replacement Bearing
- Bore: 1.4016"
- Cylindrical inner Race: Non-separable
- Outer Diameter: 2.252"
- Type: NS
- Width: 0.698"
- Part Description: 1996 Ford Mustang Rear Passenger Side Standard Replacement Wheel Bearing
More Info Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
Product Specifications- Notes: w/Borg-Warner T5WC Trans;Tapered Cone; Borg-Warner T5WC
- Part Description: 1996 Ford Mustang Rear Driver Side Inner Wheel Bearing Cone
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Notes: Mustang; 7.5" Axle
- Item Dimensions: 3.3 x 3.1 x 1.3 inches
- Item Weight: 1.00 Pounds
- Replaces: B7A-4221-A
- Part Description: 1996 Ford Mustang Side Bearings
More Info Vehicle Fitment- 1996 Ford Mustang | Base, Bullitt, GT, GT Bullitt, GT-350 20th Anniversary, GTS, L, LX, Mach 1, Shelby GT, Shelby GT500, Shelby GT500KR, SVO, SVT Cobra, SVT Cobra 10th Anniversary, SVT Cobra R | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS
$13.35 MSRP: $19.33
You Save: $5.98 (31%)
Product Specifications- Notes: Tapered Cup; Tremec 3550;w/Tremec 3550 Trans
- Cup Bore: 3.3464"
- Cup Length: 17.4630 mm
- Cup Radius: 0.0460"
- Part Description: 1996 Ford Mustang Rear Outer Wheel Bearing Race
More Info Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Notes: Tapered Cup; Tremec 3550;w/Tremec 3550 Trans
- Part Description: 1996 Ford Mustang Rear Inner Wheel Bearing Race
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Notes: Borg-Warner T5WC;Taper Bearing Set Incls Cup & Cone; w/Borg-Warner T5WC Trans
- Part Description: 1996 Ford Mustang Front Passenger Side Inner Wheel Bearing and Race Set
Vehicle Fitment- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Notes: Tapered Cup; Borg-Warner T5WC;w/Borg-Warner T5WC Trans
- Part Description: 1996 Ford Mustang Rear Inner Wheel Bearing Race
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone; w/Borg-Warner T5WC Trans;Taper Bearing Set Incls Cup & Cone; w/Borg-Warner T45 Trans
- Part Description: 1996 Ford Mustang Front Driver Side Inner Tapered Wheel Bearing and Race Set
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
Product Specifications- Notes: Tapered Cup; Borg-Warner T45;w/Borg-Warner T45 Trans
- Cup Bore (Inch): 3.2650
- Cup Bore (mm): 82.9310
- Cup Length (Inch): 0.7500
- Cup Length (mm): 19.0500
- Cup Radius (Inch): 0.0310
- Cup Radius (mm): 0.7870
- Part Description: 1996 Ford Mustang Front Inner Wheel Bearing Race
More Info Vehicle Fitment- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
- 1996 Ford Mustang | All Trims | All Engines
Show More Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone;Borg-Warner T45
- Part Description: 1996 Ford Mustang Front Driver Side Outer Wheel Bearing and Race Set
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Notes: with Ford Axle; with 8.8in Ring Gear;Tapered Cup; Borg-Warner T45;w/Borg-Warner T45 Trans;with Ford Axle; with 7.5in Ring Gear
- Part Description: 1996 Ford Mustang Front Transfer Case Output Shaft Race
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Bolt Pattern_New: 5
- Inside Diameter: 2.8"
- Lug Pattern: 5
- Material: Steel
- Mounting Flange Material: Steel
- Outside Diameter: 5.47"
- Package Contents: Hub Bearing
- UPC: 885484603950
- Part Description: 1996 Ford Mustang OE Solutions Front Passenger Side Wheel Bearing And Hub Assembly
More Info Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
Product Specifications- Notes: 7.50" & 8.80" Ring Gears
- Bore: 2.292"
- Boretite: Yes
- Outer Diameter: 2.296"
- Shaft: 1.3990"
- UPC: 826732651613
- Width: 0.469"
- Part Description: 1996 Ford Mustang Rear Wheel Seal
More Info Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
- 1996 Ford Mustang | All Trims | 6 Cyl 3.8L
- 1996 Ford Mustang | All Trims | 8 Cyl 4.6L
Show More Product Specifications- Notes: Mustang
- Location: Driver Side; Passenger Side
- Other Names: Hub Assembly
- Item Dimensions: 8.3 x 4.6 x 6.1 inches
- Item Weight: 5.70 Pounds
- Replaces: 1R3Z-1104-AA, YR3Z-1104-BA
- Part Description: 1996 Ford Mustang Hub & Bearing
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$85.24 MSRP: $140.91
You Save: $55.67 (40%)
Product Specifications- Notes: Mustang
- Location: Driver Side; Passenger Side
- Other Names: Hub Assembly
- Item Dimensions: 8.3 x 4.6 x 6.1 inches
- Item Weight: 5.70 Pounds
- Replaces: 1R3Z-1104-AA, YR3Z-1104-BA
- Part Description: 1996 Ford Mustang Hub & Bearing
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$85.24 MSRP: $140.91
You Save: $55.67 (40%)
Product Specifications- Notes: Mustang
- Location: Driver Side; Passenger Side
- Other Names: Hub Assembly
- Item Dimensions: 8.3 x 4.6 x 6.1 inches
- Item Weight: 5.70 Pounds
- Replaces: 1R3Z-1104-AA, YR3Z-1104-BA
- Part Description: 1996 Ford Mustang Hub & Bearing
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$85.24 MSRP: $140.91
You Save: $55.67 (40%)
Product Specifications- Notes: Mustang
- Location: Driver Side; Passenger Side
- Other Names: Hub Assembly
- Item Dimensions: 8.3 x 4.6 x 6.1 inches
- Item Weight: 5.70 Pounds
- Replaces: 1R3Z-1104-AA, YR3Z-1104-BA
- Part Description: 1996 Ford Mustang Hub & Bearing
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$85.24 MSRP: $140.91
You Save: $55.67 (40%)
Product Specifications- Location: Driver Side; Passenger Side
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: -N808405-S100, -N808405-S100A, F3LY-3B477-A
- Part Description: 1996 Ford Mustang Hub Assembly Retainer Nut
More Info Vehicle Fitment- 1996 Ford Mustang | Base, Boss 302, Bullitt, GT, GT Bullitt, GTS, Mach 1, Shelby GT, Shelby GT500, Shelby GT500KR, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.7 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
$9.00 MSRP: $15.50
You Save: $6.50 (42%)
Product Specifications- Location: Driver Side; Passenger Side
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: -N808405-S100, -N808405-S100A, F3LY-3B477-A
- Part Description: 1996 Ford Mustang Hub Assembly Retainer Nut
More Info Vehicle Fitment- 1996 Ford Mustang | Base, Boss 302, Bullitt, GT, GT Bullitt, GTS, Mach 1, Shelby GT, Shelby GT500, Shelby GT500KR, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.7 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
$9.00 MSRP: $15.50
You Save: $6.50 (42%)
Product Specifications- Item Dimensions: 3.4 x 3.3 x 2.6 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: B7A-4221-B
- Replaced by: NL3Z-4220-A
- Part Description: 1996 Ford Mustang Side Bearings
More Info Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GT-350 20th Anniversary, GTS, L, LX, Mach 1, SVO, SVT Cobra, SVT Cobra 10th Anniversary, SVT Cobra R | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$11.55 MSRP: $16.58
You Save: $5.03 (31%)
Product Specifications- UPC: 805890567295
- Part Description: 1996 Ford Mustang Premium™ Front Driver Side Non-Driven Wheel Bearing and Hub Assembly
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines
Product Specifications- Item Weight: 0.80 Pounds
- Part Description: 1996 Ford Mustang Hub Assembly Wheel Bolt
Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
Product Specifications- Item Weight: 0.80 Pounds
- Part Description: 1996 Ford Mustang Hub Assembly Wheel Bolt
Vehicle Fitment- 1996 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
Product Specifications- Notes: w/Tremec 3550 Trans
- Part Description: 1996 Ford Mustang Wheel Taper Bearing Race
Vehicle Fitment- 1996 Ford Mustang | All Trims | All Engines