37 products about 1995 Mercedes-Benz E320 Cooling Systems, Fans, Radiators & Components found
Product Specifications- Cap Maximum Pressure Rating: 20 PSI
- Cap Type: Spring Loaded Twist
- Color: White
- Material: Plastic
- Mount Hole Quantity: 2
- OE Part Number: 1245001349
- Pressurized: Yes
- UPC: 885484842397
- Part Description: Engine Coolant Recovery Tank
More Info Product Specifications- Notes: Eng# 072236 & Before
- Housing: Cast Aluminum
- Impeller Material: Cast Iron
- Number of Outlets: 4
- Rotation of Impeller: Standard
- Timing Belt Driven: No
- UPC: 072053782905
- Part Description: Engine Coolant Standard Water Pump
More Info Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1 5/16
- End 2 Inside Diameter: 1 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Trunk Height: 11
- UPC: 038244148554
- Part Description: Engine Coolant Curved Radiator Hose
More Info Product Specifications- Notes: German Engered
- Combi Switch Function: Normally Closed Contact
- Has the same Color as the orginal part: Milk White
- Internet Product Code (IPC): 8C89D7B498B
- Item has MSDS: No
- Length [mm]: 89,5
- MFG Brand Name: Hella Inc.
- MFG Model # (Series): 004765041
- Number of pins: 2
- OE Part Number: 1245400244
- Plug Type: Round Plug
- Rated Power [W]: 1,2
- Supplementary Article/Supplementary Info: with seal
- Supplier Company Name: Hella Inc.
- UPC: 760687052548
- Voltage [V]: 12
- Part Description: Engine Coolant Level Sensor
More Info Product Specifications- Notes: Grade: Aftermarket; Temperature Range (Celsius): 90C
- Diameter [mm]: 160
- Height [mm]: 43,7
- Measurement Range [°C]: 90
- Operating Mode: Hydraulic
- Packaging Depth [cm]: 8,5
- Packaging height [cm]: 17
- Packaging width [cm]: 17
- Temperature range [°C]: 90
- Weight [kg]: 0,87
- Part Description: Engine Cooling Fan Clutch
More Info Product Specifications- Notes: Primary Pump
- Housing Material: Aluminum
- Hub Height: 5.03 in
- Hub Pilot Diameter: 2.60 in
- Impeller Material: Metal
- Impeller Rotation: Standard
- UPC: 083286147300
- Water Pump Drive Type: Serpentine Belt
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Notes: Cover
- Air Vent (Bleeder Valve): No
- Bolt Hole Diameter: 0.313"
- Bolt Hole Quantity: 3
- Bolts Included: No
- Color/Finish: Black
- Housing Neck Angle (°): 90 Degree From Base
- Material: Plastic
- O Rings Included: Not Required
- OE Part Number: 1022000417, 1022030374
- Thermostat Included: No
- UPC: 019495264910
- Part Description: Engine Coolant Thermostat Housing
More Info Product Specifications- Notes: Grade: Aftermarket
- Length [mm]: 101
- Packaging height [cm]: 24,5
- Packaging width [cm]: 17
- Weight [kg]: 0,53
- Part Description: Engine Coolant Expansion Tank
More Info Product Specifications- Branch Quantity: 0
- Contains Spring: No
- End 1 Inside Diameter: 1.33 in
- End 2 Inside Diameter: 1.33 in
- Material: EPDM
- Modular Hose: No
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 5337
- UPC: 072053545111
- Part Description: Engine Coolant Molded Radiator Hose
More Info Product Specifications- Notes: w/Bolt & Seal for Threated Hole; Incls (1) 102-990-00-88 Banjo Fitting, (1) 000000-004895 Hollow Bolt & (2) 007603-008106 Seal
- UPC: 849290008750
- Part Description: Engine Coolant Thermostat Housing Cover with Bolt and Seal for Threated Hole
More Info Product Specifications- Part Description: Engine Coolant Thermostat Seal
Product Specifications- Notes: Clockwise (Std) Rotation; Thermal Fan Clutch; Std Duty
- Clutch Type: Thermal
- Rotation: Clockwise
- UPC: 083286188884
- Part Description: Engine Cooling Fan Clutch
More Info Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1 13/32
- End 2 Inside Diameter: 1 13/32
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Trunk Height: 6 1/2
- UPC: 038244637782
- Part Description: Engine Coolant Curved Radiator Hose
More Info Product Specifications- Notes: Grade: Aftermarket; Description: With Gasket; Temperature Range (Celsius): 87 C; Kit: Expert Kits +; 87 Degrees C
- Height [mm]: 63
- Length [mm]: 67
- Opening Temperature [°C]: 87
- Packaging Depth [cm]: 6,8
- Packaging height [cm]: 6,7
- Packaging width [cm]: 4
- Weight [kg]: 0,1287
- Width [mm]: 67
- Part Description: Engine Coolant Thermostat with Gasket
More Info Product Specifications- Notes: Grade: Aftermarket; Description: 2 pins; with sealing; At Expansion Tank
- Height [mm]: 21,1
- Length [mm]: 89,75
- Number of Poles: 2
- Packaging Depth [cm]: 6,8
- Packaging height [cm]: 6,7
- Packaging width [cm]: 4
- Weight [kg]: 0,016
- Width [mm]: 35,85
- Part Description: Engine Coolant Temperature Sensor
More Info Product Specifications- Notes: Grade: Aftermarket; Description: Cylinder Head; Thread Size: M14 x 1,5; Temperature Range (Celsius): 120 C; Plug (Connector): 1 Pin
- Colour Coding: Black
- Height [mm]: 19
- Length [mm]: 56,6
- Number of Poles: 1
- OE Part Number: 0055421017, A0055422617, 0055422617, A0025422517, 6615423017, A6615423017, A0055421017, A0085422617, 0085422617, A0025421017, 0025421017, 0025422517, 2D0919501C
- Packaging Depth [cm]: 3
- Packaging height [cm]: 3,3
- Packaging width [cm]: 5,8
- Spanner Size: 19
- Supplementary Article/Supplementary Info: with seal
- Switch Point [°C]: 120
- Thread Size: M14x1,5
- Weight [kg]: 0,036
- Width [mm]: 19
- Part Description: Engine Coolant Temperature Sensor
More Info Product Specifications- Part Description: Engine Coolant Temperature Sender
Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Contains Spring: No
- End 1 Inside Diameter: 1.19 in
- End 2 Inside Diameter: 1.19 in
- Material: EPDM
- Modular Hose: No
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 32534
- UPC: 072053135824
- Part Description: Engine Coolant Molded Radiator Hose
More Info Product Specifications- Part Description: Engine Coolant Temperature Sensor
Product Specifications- Notes: 20 psi Pressure Rating
- Cap Depth: 1.25 in
- Coolant Recovery System: Optional System
- Filler Neck Depth: 0.75 in
- Filler Neck Inside Diameter: 1.61 in
- Filler Neck Outside Diameter: 2.13 in
- OE Comparison Rating: OE Performance
- Pressure Rating: 20 psi
- SAE Pressure Range: 18-22 psi
- Shell Diameter: 2.33 in
- UPC: 072053108545
- Part Description: Engine Coolant Replacement Radiator Cap
More Info Product Specifications- Notes: Outlet
- Gasket or Seal Included: Not Included
- Inlet Dia. IN: 1.280
- Material: Thermoplastic
- Maximum Height: 2.202
- Meets / Exceeds OEM: Yes
- Mnt Flange Width IN: 0.574
- Style: w/o Thermostat
- Thermostat Included: Not Included
- UPC: 096361850262
- Part Description: Water Outlet
More Info Product Specifications- Fan Clutch Included: No
- Housing Material: Aluminum
- Hub Height: 128.50 mm
- Hub Hole Quantity: 4
- Impeller Material: Cast Iron
- Impeller Rotation: Standard
- Impeller Vane Quantity: 4
- Includes Back Housing: No
- Mounting Hole Quantity: 4
- Pulley Included: No
- Water Pump Drive Type: Serpentine Belt
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Notes: Grade: Aftermarket
- Cooling Hose: from engine cooler to expansion tank
- Length [mm]: 110
- Packaging Depth [cm]: 11
- Packaging height [cm]: 33
- Packaging width [cm]: 59
- Weight [kg]: 0,278
- Part Description: Engine Coolant Radiator Hose
More Info Product Specifications- Notes: Grade: Aftermarket; Location: To Bottom Of Radiator
- Length [mm]: 315
- Packaging height [cm]: 7,5
- Packaging width [cm]: 11,8
- Weight [kg]: 0,2
- Part Description: Engine Coolant Radiator Hose
More Info Product Specifications- Notes: Grade: Aftermarket; Location: From Outlet To Water Pump
- Length [mm]: 180
- Packaging Depth [cm]: 18
- Packaging height [cm]: 4
- Packaging width [cm]: 7,5
- Weight [kg]: 0,089
- Part Description: Engine Coolant Radiator Hose
More Info Product Specifications- Core Material: Aluminum
- Height: 20 7/8"
- Inlet: 1 3/8"
- Inlet Header: 20 9/16" x 2 5/16"
- Outlet: 1 3/8"
- Outlet Header: 20 9/16" x 2 5/16"
- Row: 1
- Tank Material: Plastic
- Thickness: 1 9/16"
- TOC: Concentric; 1" Diameter; 14 3/4" Distance
- UPC: 671607712698
- Width: 18 13/16"
- Part Description: Complete Radiator
More Info Product Specifications- Notes: Pressure Rating 20 psi
- Cap Depth: 1.25"
- Filler Neck Depth: 0.75"
- Filler Neck Inside Diameter: 1.61"
- Filler Neck Outside Diameter: 2.13"
- OE Part Number: 171111782, 17112227683, 5183710AA, 5278767AA, 05278767AA, 52079778AA, 1245000406, 1245000106, A1245000106, A1245000406, A1295000006, 1295000006, 1245000206, A1245000206
- Pressure: 20 psi
- Shell Diameter: 2.33"
- Type: Optional System
- UPC: 033342001350
- Part Description: Engine Coolant Radiator Cap
More Info Product Specifications- Color/Finish: Black
- Has the same Color as the orginal part: Black
- Internet Product Code (IPC): D6AEC9D72AF
- Item has MSDS: No
- MFG Brand Name: Hella Inc.
- MFG Model # (Series): 009107491
- Mounting Type: Bolted
- Number of pins: 2
- Resistor [Ohm]: 280
- Sensor Type: NTC Sensor
- Supplier Company Name: Hella Inc.
- Temperature range from [°C]: 25
- Temperature range to [°C]: 80
- Thread Size: M14x1,5
- UPC: 760687667322
- Voltage [V]: 12
- Part Description: Engine Coolant Temperature Sensor
More Info Product Specifications- Notes: w/Bolt & Seal for Threated Hole
- UPC: 849290048862
- Part Description: Engine Coolant Thermostat Housing Cover
More Info Product Specifications- Notes: Pressure Rating 20 psi
- Cap Depth: 1.5"
- Filler Neck Depth: 0.75"
- Filler Neck Inside Diameter: 1.61"
- Filler Neck Outside Diameter: 2.13"
- Pressure: 20 psi
- Shell Diameter: 2.61"
- Type: Optional System
- UPC: 033342000865
- Part Description: Engine Coolant Radiator Cap
More Info