80 products about 1994 Volkswagen Passat Cooling Systems, Fans, Radiators & Components found
Product Specifications- Notes: Incls Back Housing
- Housing: Cast Aluminum
- Impeller Material: Cast Iron
- Number of Outlets: 1
- Rotation of Impeller: Standard
- Timing Belt Driven: No
- UPC: 770075373230
- Part Description: Engine Coolant Standard Water Pump
More Info Product Specifications- Notes: Universal Fit Primary cooling fan. Reversible for push or pull operation. Incls mounting hardware. Controls not Incld; Std Perf w/16" Fan.
- Blade Color A : Black
- Blade Material: Plastic; Reinforced Nylon
- Blade Quantity: 8
- Blade Type: curved 'S' blade
- Bracket: w/o Bracket
- CFM Free Air High: 1400
- CFM Free Air Low: 1400
- CFM Rad Mnt High: 1150
- CFM Rad Mnt Low: 1150
- Color: Black
- Depth IN: 3.87"
- Depth MM: 107.950
- Dia. IN: 16.000
- Dia. MM: 406.400
- Fan 1 Diameter: 16.000
- Fan Clutch Mounted: no
- Fan Quantity: 1
- Fan Type: Universal Electric fan
- Material: Reinforced Nylon
- Mounting Hardware: Included
- O.E. Replacement: No
- Performance Rated: Yes
- Rotation: Reversible
- SDS Required: No (135233618)
- Shroud Color: Black
- Shroud Included: finger guard on fan
- Shroud Material: Plastic; reinforced nylon
- Style: Reversible Fan
- Universal Or Specific Fit: Universal Electric fan
- UPC: 096361368989
- Voltage: 12
- Volume (CFM): 1400
- Wiring Harness Length: 36.000
- Part Description: Electric Fan Kit
More Info Product Specifications- Color: Black
- Depth: 6.3"
- Gasket or Seal Included: No
- Inlet Pipe Diameter: 0.53"
- Material: Plastic, Rubber, Steel
- Mount Hole Quantity: 0
- OE Part Number: 251 965 561 B
- Outlet Pipe Diameter: 0.53"
- Pulley Flange Mount Hole Quantity: 0
- Pulley Included: No
- Rotation: Clockwise
- Shaft Included: No
- UPC: 885484274518
- Part Description: Engine Coolant Auxiliary Water Pump
More Info Product Specifications- Housing: Cast Aluminum
- Impeller Material: Plastic
- Rotation of Impeller: Standard
- Timing Belt Driven: No
- UPC: 072053785135
- Part Description: Engine Coolant Standard Water Pump
More Info Product Specifications- Notes: Cover
- Air Vent (Bleeder Valve): No
- Bolt Hole Diameter: 0.27"
- Bolt Hole Quantity: 8
- Bolts Included: No
- Color/Finish: Black
- Housing Neck Angle (°): 90 Degree
- Material: Plastic
- OE Part Number: 021 121 117A
- Outlet Diameter: 1.28"
- Thermostat Included: No
- UPC: 019495263807
- Part Description: Engine Coolant Thermostat Housing
More Info Product Specifications- Notes: 8 Vane Impeller; Serpentine Belt Driven
- UPC: 036687986511
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Notes: Universal Fit Super Duty Electric Puller Primary Fan. Incls mounting hardware. Controls not Incld.
- CFM Free Air High: 1700
- CFM Rad Mnt High: 1400
- Depth IN: 2.56"
- Dia. IN: 16.000
- Fan Quantity: 1
- Material: Plastic
- Mounting Hardware: Included
- Performance Rated: Yes
- SDS Required: No (135233618)
- UPC: 096361089969
- Part Description: Auxiliary Engine Cooling Fan
More Info Product Specifications- Notes: 9 Bolt Gasket
- Complete: Y
- Contains Applications: Y
- Release Wave: 03/29/2019
- UPC: 023913801977
- Part Description: Engine Coolant Water Pump Gasket
More Info Product Specifications- Cap Maximum Pressure Rating: 20 PSI
- Cap Type: Spring Loaded Twist
- Color: Clear
- Height: 186.4 mm
- Length: 198.2 mm
- Material: Plastic
- Mount Hole Quantity: 2
- OE Part Number: 1K0121407A
- Pressurized: Yes
- UPC: 019495455752
- Part Description: Engine Coolant Recovery Tank
More Info Product Specifications- Notes: 4-Pin; Color-Black/Blue
- Part Description: Engine Coolant Temperature Sender
Product Specifications- Notes: Universal Fit Super Duty Electric Pusher Primary Fan. Incls mounting hardware. Controls not Incld.
- Depth IN: 2.56"
- Dia. IN: 16.000
- Fan Quantity: 1
- Material: Plastic
- Mounting Hardware: Included
- Performance Rated: Yes
- SDS Required: No (135233618)
- UPC: 096361089976
- Part Description: Auxiliary Engine Cooling Fan
More Info Product Specifications- Notes: V-Belt Driven
- UPC: 036687985927
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Fan Clutch Included: No
- Housing Material: Aluminum
- Hub Height: 31.60 mm
- Hub Hole Quantity: 3
- Impeller Material: Cast Iron
- Impeller Rotation: Reverse
- Impeller Vane Quantity: 8
- Includes Back Housing: No
- Mounting Hole Quantity: 3
- Pulley Included: No
- Water Pump Drive Type: Serpentine Belt
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Notes: Thermostat Housing To Head
- Material: Molded Rubber
- UPC: 023913695941
- Part Description: Engine Coolant Thermostat Gasket
More Info Product Specifications- Notes: 190 Degree; Alternate Temperature
- By-Pass Flange Diameter: 1.69"
- Depth from Flange: 1.15"
- Design: Bottom By-Pass
- Flange Diameter: 2.62"
- Height from Flange: 1.29"
- Includes Installation Tool: No
- Jiggle Pin/Check Valve: Yes
- Material: Steel, Copper
- Number of Gaskets: 0
- Number of Jiggle Pins/Check Valves: 1
- Number of Seals: 0
- OE Comparison Rating: OE Performance
- OE Part Number: 280, 31159, 5609
- Temperature (C): 88
- Temperature (F): 190
- Total Height: 2.44"
- Type: OE Type Thermostat
- UPC: 072053022469
- Part Description: OE Type Engine Coolant Thermostat
More Info Product Specifications- Notes: Temperature 189 Degrees; Seal Included Seal Included; Part Replacement Replaces 48349; OE Temperature
- Bypass Plate Diameter: 1.37"
- Flange Diameter (With Seal): 2.63"
- Flange Diameter (Without Seal): 2.63"
- Height from Flange to Bottom: 0.984"
- Height from Flange to Top of Bridge: 1.02"
- OE Part Number: 078121113F
- Temperature (F): 189 Degrees
- UPC: 033342080911
- Part Description: OE Exact Engine Coolant Thermostat
More Info Product Specifications- Cap Type: Spring Loaded Twist
- Color: White
- Material: Plastic
- Mount Hole Quantity: 1
- OE Part Number: 1H0121407C, 1H0-121-321-C, 1H0121407A
- Pressurized: Yes
- UPC: 885484342811
- Part Description: Engine Coolant Recovery Tank
More Info Product Specifications- Notes: Grade: Aftermarket; Description: With Gasket; Thread Size: M22 x 1,5; Temperature Range (Celsius): 95-85 / 102-93 C; Plug (Connector): 3 Pins
- Colour: Black
- Height [mm]: 45
- Length [mm]: 29
- Number of Poles: 3
- Packaging Depth [cm]: 3
- Packaging height [cm]: 3,3
- Packaging width [cm]: 5,8
- Supplementary Article/Supplementary Info: with seal
- Switch: with double thermal switch
- Switch Point [°C]: 85
- Switch point from [°C]: 102
- Switch point to [°C]: 85
- Thread Size: M22x1,5
- Weight [kg]: 0,07345
- Part Description: Engine Cooling Fan Switch
More Info Product Specifications- Notes: Grade: Aftermarket
- Height [mm]: 60
- Length [mm]: 169
- OE Part Number: 251965561B
- Operating Mode: Electric
- Packaging Depth [cm]: 8,5
- Packaging height [cm]: 17
- Packaging width [cm]: 17
- Part number of recommended accessories: V99-16-0004
- UPC: 884109074878
- Voltage [V]: 12
- Weight [kg]: 0,414
- Width [mm]: 91.7
- Part Description: Engine Coolant Auxiliary Water Pump
More Info Product Specifications- Notes: 20 psi Pressure Rating
- Cap Depth: 0.74 in
- Coolant Recovery System: Closed System
- Filler Neck Depth: 0.74 in
- Filler Neck Inside Diameter: 50 mm
- Filler Neck Outside Diameter: 2.28 in
- OE Comparison Rating: OE Performance
- Pressure Rating: 20 psi
- SAE Pressure Range: 18-22 psi
- Shell Diameter: 3.11 in
- UPC: 072053446678
- Part Description: Engine Coolant Replacement Radiator Cap
More Info Product Specifications- Notes: Universal Fit Super Duty Electric Pusher Primary Fan. Incls mounting hardware. Controls not Incld.
- Depth IN: 2.56"
- Dia. IN: 12.000
- Fan Quantity: 1
- Material: Plastic
- Mounting Hardware: Included
- Performance Rated: Yes
- SDS Required: No (135233618)
- UPC: 096361089938
- Part Description: Auxiliary Engine Cooling Fan
More Info Product Specifications- Notes: Grade: Aftermarket; Material Type: Plastic
- Diameter [mm]: 120
- Heating/Cooling: Plastic impeller
- Height [mm]: 110
- OE Part Number: 021121004A, 1 001 889, A 0002000701, 21 121 004 AX, 211 210 04A X, 21 121 004 X, 21121004A, 0002000701, 21121004V, 21 121 004 V, A 000 200 03 01, 21121004X, 21121004AX, 21 121 004, 21121004, 021 121 004 A, 021 121 004 X, 211 210 04A V, 21 121 004 AV, 1 05
- Operating Mode: Mechanical
- Packaging height [cm]: 11,3
- Packaging width [cm]: 12,9
- Supplementary Article/Info 2: with water pump seal ring
- Weight [kg]: 1,18
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Notes: with M30 Hub
- Fan Clutch Included: No
- Housing Material: Aluminum
- Hub Height: 74.50 mm
- Hub Hole Quantity: 3
- Impeller Material: Composite
- Impeller Rotation: Standard
- Impeller Vane Quantity: 6
- Includes Back Housing: No
- Mounting Hole Quantity: 9
- Pulley Included: No
- Water Pump Drive Type: Serpentine Belt
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Notes: Housing
- Inside Diameter: 1.9500 in
- Material: Molded Rubber
- UPC: 023913755072
- Part Description: Engine Coolant Water Pipe O Ring
More Info Product Specifications- Notes: Primary Pump
- Housing Material: Aluminum
- Hub Height: 1.22 in
- Hub Pilot Diameter: 2.27 in
- Impeller Material: Metal
- Impeller Rotation: Reverse
- Pulley Type: Flange
- UPC: 083286180086
- Water Pump Drive Type: Serpentine Belt
- Part Description: Engine Coolant Water Pump
More Info Product Specifications- Part Description: Engine Coolant Thermostat Seal
Product Specifications- Notes: Grade: Aftermarket; Location: Located on the drivers side of the engine.
- Cooling Hose: from distributor to cylinder head
- Length [mm]: 127
- OE Part Number: 3864, 021 121 117 A, 21121117A, 0002030061, 21 121 117 A
- Packaging height [cm]: 9,5
- Packaging width [cm]: 9,91
- Weight [kg]: 0,299
- Part Description: Engine Coolant Thermostat Housing
More Info Product Specifications- Notes: Universal Fit Super Duty Electric Puller Primary Fan. Incls mounting hardware. Controls not Incld.
- Material: Plastic
- Performance Rated: Yes
- SDS Required: No (135233618)
- UPC: 096361089921
- Part Description: Auxiliary Engine Cooling Fan
More Info Product Specifications- Notes: Grade: Aftermarket; Description: With Gasket; Temperature Range (Celsius): 80 C; Kit: Expert Kits +
- Diameter [mm]: 65
- Height [mm]: 60
- Length [mm]: 65
- Opening Temperature [°C]: 80
- Packaging Depth [cm]: 13,4
- Packaging height [cm]: 12,1
- Packaging width [cm]: 14,1
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0,12117
- Width [mm]: 60
- Part Description: Engine Coolant Thermostat with Gasket
More Info Product Specifications- Notes: Pump Only
- Housing Material: Aluminum
- Hub Height: 2.91 in
- Hub Pilot Diameter: 1.65 in
- Impeller Material: Metal
- Impeller Rotation: Standard
- Pulley Type: Flange
- UPC: 826732577678
- Water Pump Drive Type: Serpentine Belt
- Part Description: Engine Coolant Water Pump
More Info