37 products about 1993 Mazda MPV A/C & Heating found
Product Specifications- Notes: Cut to Length, 3";Cut to Length, 7"; Protective sleeve Reqd;Cut to Length, 6"
- Centerline Length: 50 ft
- End 1 Inside Diameter: .625 in
- End 2 Inside Diameter: .625 in
- Material: EPDM
- OE Part Number: 8990
- UPC: 072053066319
- Weight Per Length: 11.70 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 1993 Mazda MPV Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ 10PA17C Compressor; Reman w/ Clutch; May Require use of OE Manifold
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.250
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA17C
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 2.15625
- Mount Distance MM: 54.610
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 133.350
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.250
- Pulley Outside Diameter: 5.250
- Pulley Ridge Diameter: 5.250
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Terminal Type: Spade
- UPC: 096361773042
- Part Description: 1993 Mazda MPV Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Cut to Length, 6"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.3125"
- OE Part Number: 49692
- UPC: 072053133226
- Weight Per Length: 7.25 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 1993 Mazda MPV Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
Product Specifications- Notes: w/ Rear AC
- Blade Material: Plastic
- Blade Material B : Plastic
- Blade Type: Rigid
- Connector Gender: Female
- Connector qty: 1
- Connector Shape: Round
- Connector Type: 2 wire lead w/ Connector
- Electrical or Mechanical: Electrical
- Fan 1 Blade Quantity: 7
- Fan 2 Blade Quantity: 7
- Fan Clutch Mounted: Fan clutch not mounted within the assembly.
- Fan Quantity: 1
- Height IN: 16.750
- Housing Finish: Black
- Hub Bolt Hole Quantity: OE Mount
- Material: Plastic / Metal
- Mount Location: Condenser Fan
- Mount Type: OE mount
- Mounting Hardware: Not Included
- O.E. Replacement: Yes
- OE Part Number: 621086, FA70585
- Package Depth IN: 20.000
- Package Depth MM: 508.000
- Package Height IN: 5.500
- Package Height MM: 139.700
- Package Length IN: 16.000
- Package Length MM: 406.400
- Performance Rated: Yes
- Shroud Included: Included
- Shroud Material: Metal
- Style: Condenser Fan
- Terminal Gender: Male
- Terminal Quantity: 2
- UPC: 096361761131
- Voltage: 12
- Width IN: 10.500
- Part Description: 1993 Mazda MPV A C Condenser Fan Assembly
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.25"
- OE Part Number: 34580
- UPC: 072053133219
- Weight Per Length: 6 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 1993 Mazda MPV Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 3/4
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 5
- UPC: 038244598168
- Part Description: 1993 Mazda MPV Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ 10PA17C Compressor; New w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.250
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA17C
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 2.15625
- Mount Distance MM: 54.610
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- O-Ring C Number/Desc: Not Required
- O-Ring C Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 133.350
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.250
- Pulley Outside Diameter: 5.250
- Pulley Ridge Diameter: 5.250
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Terminal Type: Spade
- UPC: 096361783041
- Part Description: 1993 Mazda MPV A C Compressor With Clutch
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1/4
- End 2 Inside Diameter: 1/4
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 038244597475
- Part Description: 1993 Mazda MPV Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ 10PA17C Compressor; New w/ Clutch
- Belt Width IN: 0.500
- Belt Width MM: 12.700
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.250
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA17C
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 2.796875
- Mount Distance MM: 71.120
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- O-Ring C Number/Desc: Not Required
- O-Ring C Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 133.350
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.250
- Pulley Outside Diameter: 5.250
- Pulley Ridge Diameter: 5.250
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Terminal Type: Spade
- UPC: 096361683716
- Part Description: 1993 Mazda MPV A C Compressor With Clutch
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
Product Specifications- Notes: Cut to fit
- Angle: 90
- Arm Length: 152 mm
- Centerline Length: 254 mm
- End 1 Inside Diameter: 16 mm
- End 2 Inside Diameter: 16 mm
- Material: EPDM
- OE Part Number: 8915
- UPC: 072053062007
- Part Description: 1993 Mazda MPV 90 Degree Hvac Heater Molded Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ 10PA17C Compressor; New w/o Clutch; May Require use of OE Manifold
- Clutch Included: No
- Coil Clock Position: Non Clutch
- Coil Voltage: NR
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA17C
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Non-Clutch
- Pulley Groove Quantity: NR
- Refrigerant Type: R134a
- Suc Prt Typ Note: w/Gasket
- Suction Port Type: Pad Mount
- UPC: 096361583627
- Part Description: 1993 Mazda MPV A C Compressor Without Clutch
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/o Rear AC
- Blade Material: Plastic
- Blade Material B : Plastic
- Blade Type: Rigid
- Connector Gender: Female
- Connector qty: 1
- Connector Shape: Round
- Connector Type: 2 wire lead w/ Connector
- Electrical or Mechanical: Electrical
- Fan 1 Blade Quantity: 7
- Fan 2 Blade Quantity: 7
- Fan Clutch Mounted: Fan clutch not mounted within the assembly.
- Fan Quantity: 1
- Height IN: 16.000
- Housing Finish: Black
- Hub Bolt Hole Quantity: OE Mount
- Material: Plastic / Metal
- Mount Location: Condenser Fan
- Mount Type: OE mount
- Mounting Hardware: Not Included
- O.E. Replacement: Yes
- Package Depth IN: 20.000
- Package Depth MM: 508.000
- Package Height IN: 5.250
- Package Height MM: 133.350
- Package Length IN: 16.000
- Package Length MM: 406.400
- Performance Rated: Yes
- Shroud Included: Included
- Shroud Material: Metal; Steel
- Style: Condenser Fan
- Terminal Gender: Male
- Terminal Quantity: 2
- UPC: 096361761124
- Voltage: 12
- Width IN: 10.500
- Part Description: 1993 Mazda MPV A C Condenser Fan Assembly
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
Product Specifications- Centerline Length (in): 20.2"
- Inside Diameter 1 (in): 0.62"
- Inside Diameter 2 (in): 0.75"
- Number of Branches: 0
- UPC: 072053178944
- Part Description: 1993 Mazda MPV Hvac Heater Molded Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/o Wheel; w/o AC
- Cage Wheel Included: w/o Wheel
- Connector Gender: None
- Connector qty: None
- Flanged End: Yes
- Material: Metal
- Motor Diameter: 3.000
- Motor Length: 3.375
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: Connector Not Included
- O.E. Replacement: Yes
- Rotation: CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.625
- Shaft Shape: Round
- Shaft Type: Round
- Style: Flanged
- Terminal Type: 2 Lead Wires
- UPC: 096361352636
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1993 Mazda MPV Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Angle: 90
- Arm Length 1 (in): 4"
- Arm Length 2 (in): 12"
- Centerline Length (in): 16"
- Inside Diameter 1 (in): 0.75"
- OE Part Number: 34594
- UPC: 072053062090
- Part Description: 1993 Mazda MPV 90 Degree Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/o Wheel
- Cage Wheel Included: w/o Wheel
- Connector Gender: None
- Connector qty: None
- Flanged End: Yes
- Material: Metal
- Motor Diameter: 3.250
- Motor Length: 4.125
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: Connector Not Included
- O.E. Replacement: Yes
- Rotation: CW
- Shaft Diameter: 0.3125
- Shaft Length: 1.375
- Shaft Shape: D-Shaped
- Shaft Type: D-Shaped
- Style: Flanged
- Terminal Type: 2 Lead Wires
- UPC: 096361350083
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1993 Mazda MPV Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.25"
- Number of Branches: 0
- OE Part Number: 1785
- UPC: 072053178005
- Part Description: 1993 Mazda MPV Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ 10PA17C Compressor; New
- Belt Type: V-Belt
- Belt Width IN: 0.500
- Belt Width MM: 12.700
- Can Size: w/ Coil
- Clutch Maximum Diameter: 5.250
- Coil: w/ Coil
- Coil Voltage: 12
- Color: Black
- Distance From Clutch To Mounting Flange: 0.984375
- Groove: 1
- Lead Wire : Lead Wires
- Material: Steel
- Meets / Exceeds OEM: Yes
- Mounting Type: Snap Ring
- Printed Foot Note: May Require use of OE Manifold
- Rotation: CCW-CW
- Style: 10PA
- Thermal Or Non Thermal: NR
- UPC: 096361478213
- Part Description: 1993 Mazda MPV A C Compressor Clutch
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
Product Specifications- Centerline Length: 216; 8.5
- End 1 Inside Diameter: .28; 7
- End 2 Inside Diameter: .28; 7
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- UPC: 072053191561
- Part Description: 1993 Mazda MPV Engine Coolant Reservoir Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
Product Specifications- Core Depth Fraction: 4
- Core Depth MM: 101.600
- Core Height Fraction: 6-1/4; 6-3/8
- Core Height MM: 158.750; 161.925
- Core Width Fraction: 8-1/2
- Core Width MM: 215.900
- Depth: 4.000
- Height: 6.250; 6.375
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24610] / Green O-Ring
- O-Ring B Quantity: 1
- Outlet Fitting Outside Diameter: No. 10
- UPC: 096361541986
- Width: 8.500
- Part Description: 1993 Mazda MPV A C Evaporator Core
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Notes: w/o Wheel; w/ AC
- Cage Wheel Included: w/o Wheel
- Connector Gender: None
- Connector qty: None
- Flanged End: Yes
- Material: Metal
- Motor Diameter: 3.000
- Motor Length: 3.875
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: Connector Not Included
- O.E. Replacement: Yes
- Rotation: CW/CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.875
- Shaft Shape: Round
- Shaft Type: Round
- Style: Flanged
- Terminal Type: 2 Lead Wires
- UPC: 096361353688
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1993 Mazda MPV Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Notes: Discharge Line
- Bracket: w/o Bracket
- Component Type: Discharge Line
- Fittings Included: Included
- Gasket or Seal Included: Included
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 2
- O.E. Replacement: Yes
- Refrigerant Type: R12, R134a
- Service Port: w/o Service Port
- Suction End Type: P-Nut Fitting
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- UPC: 096361551329
- Part Description: 1993 Mazda MPV A C Discharge Line Hose Assembly
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Color: Black
- Comp Open/Closed: Open
- Connector Gender: Female
- Connector Shape: Oval; Rectangle; Round
- Fitting Thread Size: 3/8 in. x 24
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mounted
- Number of Terminals: 2
- Operate Psi Low Off: 34
- Operate Psi Low On: 37
- Style: Binary
- UPC: 096361209503
- Weather Pack: Yes
- Part Description: 1993 Mazda MPV A C Compressor Cut Out Switch
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings
- Style: O-Ring & Gasket Kit
- UPC: 096361267527
- Part Description: 1993 Mazda MPV A C System O Ring And Gasket Kit
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Connector Shape: Rectangle
- Gender: Male
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 4
- UPC: 096361372573
- Part Description: 1993 Mazda MPV A C Clutch Control Relay Harness Connector
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Color: Brass
- Refrigerant Type: R134A
- UPC: 096361386167
- Part Description: 1993 Mazda MPV A C Expansion Valve
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Connector Shape: Oval
- Gender: Male
- OE Part Number: B3C8-18-840
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 2
- UPC: 096361027961
- Part Description: 1993 Mazda MPV Coolant Temperature Sensor Connector
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Caps and Valve Core Seal Kit; w/ R12 or R134a Retrofit System
- Cap Color: Red, Blue, Black
- Cap Inside Diameter: Specific
- Cap Material: Plastic
- Material: Aluminum
- Refrigerant Type: R12, R134a
- Style: Cap & Valve Kit
- UPC: 096361267770
- Valve Core Material: Specific
- Part Description: 1993 Mazda MPV A C System Valve Core And Cap Kit
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1/4
- End 1 Outside Diameter: 17/32
- End 2 Inside Diameter: 1/4
- End 2 Outside Diameter: 17/32
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 7
- UPC: 036687695475
- Part Description: 1993 Mazda MPV Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | 4 Cyl 2.6L
Product Specifications- Core Depth Fraction: 4
- Core Depth MM: 101.600
- Core Height Fraction: 8-5/16
- Core Height MM: 211.137
- Core Width Fraction: 11-13/16; 11-3/16
- Core Width MM: 300.038
- Depth: 4.000
- Height: 8.3125
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24610] / Green O-Ring
- O-Ring B Quantity: 1
- Outlet Fitting Outside Diameter: No. 10
- UPC: 096361547551
- Width: 11.8125
- Part Description: 1993 Mazda MPV A C Evaporator Core
More Info Vehicle Fitment- 1993 Mazda MPV | All Trims | All Engines