174 products about 1992 Nissan D21 Driveline, Axles & 4WD found
Product Specifications- Notes: 4WD, From 1/92, 6 Cylinder
- Other Names: Axle Assembly Bearing
- Item Dimensions: 5.3 x 3.1 x 0.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Nissan D21 Bearing-Needle, Drive Shaft
More Info Vehicle Fitment- 1992 Nissan D21 | Base, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$35.88 MSRP: $49.03
You Save: $13.15 (27%)
Product Specifications- Notes: 4WD
- Other Names: Axle Assembly Oil Seal
- Item Dimensions: 4.2 x 4.1 x 1.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Nissan D21 Seal-Oil
More Info Vehicle Fitment- 1992 Nissan D21 | Base, E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$26.57 MSRP: $36.32
You Save: $9.75 (27%)
Product Specifications- Notes: 4WD; Pick-Up
- Location: Driver Side; Passenger Side
- Other Names: Front Hub Seal, Oil Seal
- Item Dimensions: 4.5 x 4.4 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Nissan D21 Seal Grease Front Hub
More Info Vehicle Fitment- 1992 Nissan D21 | Base, E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$12.91 MSRP: $17.62
You Save: $4.71 (27%)
Product Specifications- Drive Shaft Diameter (In): 2.5"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: No
- Length: 60.75"
- Material: Steel
- OE Part Number: 3700003G01, 37000S3805
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Product Condition: New
- UPC: 037495123167
- Wall Thickness: 0.065"
- Part Description: 1992 Nissan D21 OE Solutions Rear Driveshaft
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: 4WD, 6 Cylinder
- Location: Driver Side
- Other Names: Axle Seal, Flange Oil Seal
- Item Dimensions: 2.3 x 2.2 x 0.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38342-P9000
- Part Description: 1992 Nissan D21 Seal-Oil
More Info Vehicle Fitment- 1992 Nissan D21 | Base, E, SE, XE | 6 Cyl 3.0 L GAS
$13.41 MSRP: $18.30
You Save: $4.89 (27%)
Product Specifications- Notes: BEARING ID / BORE: 1.1811 INCH / 30 MM;w/BEARING;CUSHION INSERT ONLY;w/o FRAME;
- Inside Diameter: 1.181"
- OE Part Number: 37521-41L25
- UPC: 081106084743
- Part Description: 1992 Nissan D21 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
- 1992 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 24-1/4" (616 mm) Long Driveshaft
- Greasable: Yes
- Length: 24.25"
- Length (mm): 615,95
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1992 Nissan D21 Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: Rear, Upper, 2WD; Pick-Up; Rear; 2WD; W/Heavy Duty;Pick-Up; Rear; 4WD; Upper
- Other Names: Bushing, Rear Bushings, Spring Bushing
- Item Dimensions: 1.5 x 1.5 x 1.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Nissan D21 Bush-Rear Spring Rear Upper
More Info Vehicle Fitment- 1992 Nissan D21 | Base, E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$7.49 MSRP: $10.22
You Save: $2.73 (27%)
Product Specifications- Notes: Built in USA.
- Drive Shaft Diameter (In): 2.5"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: No
- Length: 72.5"
- Material: Steel
- OE Part Number: 37000S4203
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Product Condition: New
- UPC: 037495123174
- Wall Thickness: 0.065"
- Part Description: 1992 Nissan D21 OE Solutions Rear Driveshaft
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Bearing & Support
- Inside Diameter: 1.181"
- Outside Diameter: 4.316"
- UPC: 085311185486
- Width: 2.135"
- Part Description: 1992 Nissan D21 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: BEARING ID / BORE: 1.1811 INCH / 30 MM;w/BEARING;CUSHION INSERT ONLY;w/o FRAME;
- Inside Diameter: 1.811"
- OE Part Number: 37521-36G25
- UPC: 081106085344
- Part Description: 1992 Nissan D21 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Bracket Material: Steel
- Inside Diameter: 1.181"
- Installation Hardware Included: Not Required
- Installation Instructions Included: No
- Mounting Bracket Included: No
- Mounting Hole Quantity: 0
- OE Part Number: 37521-56G27, C37521-56G27
- Support Bearing Type: Housing Mounted Bearing
- UPC: 019495437529
- Part Description: 1992 Nissan D21 OE Solutions Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: Centric Premium Oil & Grease Seal; Fr 1/92;Centric Premium Oil & Grease Seal; Fr 1/92; HD; SRW;Centric Premium Oil & Grease Seal; Exc HD; Fr 1/92
- UPC: 805890573562
- Part Description: 1992 Nissan D21 Premium™ Axle Shaft Seal
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
- 1992 Nissan D21 | All Trims | 6 Cyl 3.0L
- 1992 Nissan D21 | All Trims | All Engines
Show More Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 23-3/4" (603 mm) Long Driveshaft
- Greasable: Yes
- Length: 23.75"
- Length (mm): 603,25
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1992 Nissan D21 Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: 4WD; Pick-Up; Inner
- Location: Driver Side; Passenger Side
- Other Names: Front Wheel Bearing, Wheel Bearing
- Item Dimensions: 3.5 x 3.5 x 0.9 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Nissan D21 Bearing Assy-Front Wheel
More Info Vehicle Fitment- 1992 Nissan D21 | Base, E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$72.84 MSRP: $99.52
You Save: $26.68 (27%)
Product Specifications- Notes: With Dual Rear Wheels
- Bore (Inch): 1.9685
- Bore (mm): 50.00
- Cone Length (Inch): 0.7874
- Cone Length (mm): 20.00
- Cone Radius (Inch): 0.0591
- Cone Radius (mm): 1.5000
- Cup Length (Inch): 0.6102
- Cup Length (mm): 15.4990
- Cup Radius (Inch): 0.0200
- Cup Radius (mm): 0.5080
- Design: ISO Metric
- Outside Diameter (Inch): 3.1496
- Outside Diameter (mm): 80.00
- Series: 32000
- Standout (Inch): 0.1772
- Standout (mm): 4.5000
- Type: TS
- UPC: 724956092055
- Width (Inch): 0.7874
- Width (mm): 20.00
- Part Description: 1992 Nissan D21 Differential Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: Bearing & Support
- Inside Diameter: 1.181"
- Outside Diameter: 4.842"
- UPC: 085311185493
- Width: 1.378"
- Part Description: 1992 Nissan D21 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: BEARING ID / BORE: 1.1811 INCH / 30 MM;w/BEARING;CUSHION INSERT ONLY;w/o FRAME;
- Inside Diameter: 1.181"
- OE Part Number: 37521-33G25
- UPC: 081106084736
- Part Description: 1992 Nissan D21 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
- 1992 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Uni-Fit; Joint Dia 3.5";Uni-Fit; Joint Dia 3.5"; Packaging Type: Box; Pkg Quantity: 1
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: 1992 Nissan D21 OE Solutions Front Inner Cv Joint Boot Kit
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- ABS Ring Included: No
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 20 1/2"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 27
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 1992 Nissan D21 Remanufactured CV Axle Assembly
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade; Outside Lock Rings;Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade; Outside Lock Rings
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 1992 Nissan D21 Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: Uni-Fit; Joint Dia 3.44";Uni-Fit; Joint Dia 3.44"; Packaging Type: Box; Pkg Quantity: 1
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: 1992 Nissan D21 OE Solutions Front Outer Cv Joint Boot Kit
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: w/Fuji Univance TX10A Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 1992 Nissan D21 Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: 4WD; Pick-Up; Outer
- Location: Driver Side; Passenger Side
- Other Names: Front Wheel Bearing, Wheel Bearing
- Item Dimensions: 2.8 x 2.8 x 0.8 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Nissan D21 Bearing ASY Out
More Info Vehicle Fitment- 1992 Nissan D21 | Base, E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$64.30 MSRP: $87.85
You Save: $23.55 (27%)
Product Specifications- Notes: w/ H190 Diff.:;H233BS Axle:;w/C200 Axle:
- Cone ID: 1.378"
- Cone Length: 1.220"
- Cone Radius: 0.078"
- Cup Length: 0.984"
- Cup Radius: 0.059"
- Outside Diameter: 3.150"
- UPC: 085311070898
- Width: 1.289"
- Part Description: 1992 Nissan D21 Front Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
- 1992 Nissan D21 | All Trims | 6 Cyl 3.0L
- 1992 Nissan D21 | All Trims | All Engines
Show More Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Inside Lock Rings;Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Inside Lock Rings
- Bearing Cap Axis 1 Diameter: 1.10
- Bearing Cap Axis 2 Diameter: 1.10
- Bearing Cap Type: Grooved
- Dimension: 1.103" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.21
- Length Axis 2: 2.21
- Lock Ring Location: Internal
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 826732298702
- Weight (Gross Pounds): 1.10
- Width (Inch): 3.50
- Part Description: 1992 Nissan D21 Grade Standard U-Joint
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines
Product Specifications- ABS Ring Included: No
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 20 3/4"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 1992 Nissan D21 Remanufactured CV Axle Assembly
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: 2WD; 4WD; Pick-Up
- Location: Driver Side; Passenger Side
- Other Names: Bushing, Shaft Bushing, Upper Control Arm Bushing
- Item Dimensions: 2.0 x 2.0 x 1.9 inches
- Item Weight: 0.60 Pounds
- Material: Rubber
- Fitment Type: Direct Replacement
- Part Description: 1992 Nissan D21 Bush-Rubber
More Info Vehicle Fitment- 1992 Nissan D21 | Base, E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$14.37 MSRP: $19.62
You Save: $5.25 (27%)
Product Specifications- Cone ID: 0.984"
- Cone Length: 0.944"
- Cone Radius: 0.059"
- Cup Length: 0.787"
- Cup Radius: 0.059"
- Outside Diameter: 2.441"
- UPC: 085311070874
- Width: 0.994"
- Part Description: 1992 Nissan D21 Rear Outer Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Outside Lock Rings;Std Grade; Grease Fitting in Cross;Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Outside Lock Rings
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 1992 Nissan D21 Spicer 1310 Series Grade Standard U-Joint
More Info Vehicle Fitment- 1992 Nissan D21 | All Trims | All Engines