124 products about 1992 Chevrolet S10 Blazer A/C & Heating found
Product Specifications- Notes: S-Series
- Item Dimensions: 2.9 x 1.2 x 0.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25036979, 12146312
- Part Description: 1992 Chevrolet S10 Blazer Fan Switch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$27.05 MSRP: $51.06
You Save: $24.01 (48%)
Product Specifications- Notes: S-Series; 4.3l
- Other Names: Compressor, Compressor Assembly
- Item Dimensions: 12.1 x 12.4 x 12.6 inches
- Item Weight: 18.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1134327, 2724794, 01134302, 01134327, 02724794, 01134343, 1134302, 1134343
- Part Description: 1992 Chevrolet S10 Blazer Compressor Assembly
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$264.89 MSRP: $479.44
You Save: $214.55 (45%)
Product Specifications- Notes: Heater Inlet Hose Fitting at Eng; Packaging Type: Box; Pkg Quantity: 5
- Fitting Angle: Straight
- Fitting Attachment End Type 1: Quick Disconnect
- Fitting Attachment End Type 2: Male Thread
- Fitting Size End 1 (in): 0.625 In.
- Fitting Size End 2 (in): 0.5 In.
- Material: Steel
- Package Contents: 5 Heater Hose Connectors
- Quick Connect System: Yes
- UPC: 019495034742
- Part Description: 1992 Chevrolet S10 Blazer Heater Hose Connector
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: Cut to Length, 30";Cut to Length, 32"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 19 mm
- End 2 Inside Diameter: 19 mm
- Material: EPDM
- OE Part Number: 49693
- UPC: 072053066326
- Weight Per Length: 13.20 lbs./Carton
- Working Pressure: 50 PSI
- Part Description: 1992 Chevrolet S10 Blazer Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: S-Series
- Other Names: Cut-Off Switch, Pressure Cycling Switch
- Item Dimensions: 4.1 x 2.1 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Chevrolet S10 Blazer Cut-Off Switch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$28.96 MSRP: $54.66
You Save: $25.70 (48%)
Product Specifications- Notes: S-Series
- Other Names: Cut-Off Switch, Pressure Cycling Switch
- Item Dimensions: 4.1 x 2.1 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Chevrolet S10 Blazer Cut-Off Switch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$28.96 MSRP: $54.66
You Save: $25.70 (48%)
Product Specifications- Notes: S-Series
- Other Names: Cut-Off Switch, Pressure Cycling Switch
- Item Dimensions: 4.1 x 2.1 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Chevrolet S10 Blazer Cut-Off Switch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$28.96 MSRP: $54.66
You Save: $25.70 (48%)
Product Specifications- Notes: S-Series
- Other Names: Cut-Off Switch, Pressure Cycling Switch
- Item Dimensions: 4.1 x 2.1 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Chevrolet S10 Blazer Cut-Off Switch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$28.96 MSRP: $54.66
You Save: $25.70 (48%)
Product Specifications- Notes: w/ R4 Compressor; Reman w/ Clutch; w/ Pin Coil Connector
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.250
- Coil Clock Position: 12
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 150
- Compressor Type: R4 Lightweight
- Distance From Clutch To Mounting Flange: 0.859375
- Mounting Hardware: Not Included
- Mounting Type: Case Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24355] / Sealing Washer
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24354] / Sealing Washer
- O-Ring B Quantity: 1
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 107.950
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.250
- Pulley Outside Diameter: 4.250
- Pulley Ridge Diameter: 4.250
- Refrigerant Type: R134a
- Suc Prt Typ Note: w/ 5/8" x 3/4" Ports
- Suction Port Type: Sealing Washer
- Switch Included: High Pressure
- Terminal Type: 8mm Pin Connector
- UPC: 096361579484
- Part Description: 1992 Chevrolet S10 Blazer Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: Heater Inlet; w/AC
- Color: Black
- Construction: Rubber
- Hardware: Use Existing Hardware
- OE Part Number: 15642506
- UPC: 019495060383
- Part Description: 1992 Chevrolet S10 Blazer Hvac Heater Hose Assembly
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/o AC
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 28
- UPC: 036687551061
- Part Description: 1992 Chevrolet S10 Blazer Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/AC
- Centerline Length (in): 19.9"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053180855
- Part Description: 1992 Chevrolet S10 Blazer Hvac Heater Molded Hose
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/ LTR4 Compressor; Reman w/ Clutch; w/ Pin Coil Connector
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.250
- Coil Clock Position: 12
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 150
- Compressor Type: R4 Lightweight
- Distance From Clutch To Mounting Flange: 0.859375
- Mounting Hardware: Not Included
- Mounting Type: Case Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24615] / Green O-Ring
- O-Ring A Quantity: 2
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 107.950
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.250
- Pulley Outside Diameter: 4.250
- Pulley Ridge Diameter: 4.250
- Refrigerant Type: R134a
- Reman w/o Clutch: [57233] / Clutch Assembly
- Suction Port Type: O-Ring / Sealing Washer
- Switch Included: High Pressure
- Terminal Type: 8mm Pin Connector
- UPC: 096361577350
- Part Description: 1992 Chevrolet S10 Blazer Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: Heater Inlet Hose Fitting at Eng; Packaging Type: Clamshell; Pkg Quantity: 1
- Color: Black
- Construction: Rubber
- Hardware: Use Existing Hardware
- OE Part Number: 15265200, 15622861, 15739936, 24503681, 24503682, 88891732, 88891735
- UPC: 019495026365
- Part Description: 1992 Chevrolet S10 Blazer Hvac Heater Hose Connector
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/AC, Exc HO
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 11
- UPC: 038244598922
- Part Description: 1992 Chevrolet S10 Blazer Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: wo/AC
- Connector Gender: Male
- Connector Quantity: 3
- Gasket or Seal Included: No
- Mount Hole Quantity: 2
- Mounting Hardware Included: No
- OE Part Number: 14093318, 3998400, 9796480, 12338662
- Package Contents: 1 Blower Motor Resistor
- Package Quantity: 1
- Packaging Type: Box
- Terminal Gender: Male
- Terminal Quantity: 3
- Terminal Type: Blade
- UPC: 889245161192
- Wire Harness Included: No
- Wire Quantity: 0
- Part Description: 1992 Chevrolet S10 Blazer Hvac Blower Motor Resistor Kit
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: w/o AC; Cut to fit
- Angle: 90
- Arm Length 1 (in): 4"
- Arm Length 2 (in): 12"
- Centerline Length (in): 16"
- Inside Diameter 1 (in): 0.625"
- UPC: 072053062014
- Part Description: 1992 Chevrolet S10 Blazer 90 Degree Hvac Heater Molded Hose
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
Product Specifications- Notes: w/ LTR4 Compressor; Reman w/ Clutch; w/ Spade Coil Connector
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.250
- Coil Clock Position: 12
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 150
- Compressor Type: R4 Lightweight
- Distance From Clutch To Mounting Flange: 0.859375
- Mounting Hardware: Not Included
- Mounting Type: Case Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24354] / Sealing Washer
- O-Ring A Quantity: 2
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 107.950
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.250
- Pulley Outside Diameter: 4.250
- Pulley Ridge Diameter: 4.250
- Refrigerant Type: R134a
- Suc Prt Typ Note: w/ 5/8" x 5/8" Ports
- Suction Port Type: Sealing Washer
- Switch Included: High Pressure
- Terminal Type: Spade
- UPC: 096361579378
- Part Description: 1992 Chevrolet S10 Blazer Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: w/Harrison V-5 AC Compressor;w/Harrison R-4 AC Compressor
- Bore (in): 1.574
- Bore (mm): 39.987
- Design: Double Row Angular Contact
- Inner Race Radius (in): 0.040
- Inner Race Radius (mm): 1.016
- Outside Diameter (In): 2.441
- Outside Diameter (mm): 62.004
- Series: SPECIAL
- Type: D-3
- Width (in): 0.812
- Width (mm): 20.625
- Part Description: 1992 Chevrolet S10 Blazer A/C Compressor Bearing
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: w/AC
- Mounting Hardware Included: No
- OE Part Number: 526897
- Package Contents: Blower Motor Resistor and Instructions
- Package Quantity: 1
- Packaging Type: Box
- Terminal Type: Blade
- UPC: 019495344186
- Part Description: 1992 Chevrolet S10 Blazer Hvac Blower Motor Resistor
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: w/LTR4 Compressor; Compressor w/Spade Coil Connector;w/ LTR4 Compressor; Compressor w/ Spade Coil Connector; Includes: 58937 (New Compressor), 33198 (Accum), 38623 (Orifice), 59003 (Oil), O-Rings
- Components Included: New Compressor, Accumulator, Orifice Tube, Oil, and O-Rings
- UPC: 096361091313
- Part Description: 1992 Chevrolet S10 Blazer A C Compressor Kit
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 4.3L
- 1992 Chevrolet S10 Blazer | All Trims | All Engines
- 1992 Chevrolet S10 Blazer | All Trims | 6 Cyl 3.1L
Show More Product Specifications- Notes: W/Cpi
- Item Dimensions: 2.8 x 2.0 x 0.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12110319
- Part Description: 1992 Chevrolet S10 Blazer Sensor
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$19.41 MSRP: $36.61
You Save: $17.20 (47%)
Product Specifications- Notes: Includes Connector; w/AC
- Gasket or Seal Included: No
- Mounting Hardware Included: No
- OE Part Number: 526897
- Package Contents: Blower Motor Resistor and Instructions
- Package Quantity: 1
- Packaging Type: Box
- Terminal Type: Blade
- UPC: 019495389866
- Part Description: 1992 Chevrolet S10 Blazer Hvac Blower Motor Resistor Kit
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: S-Series
- Item Dimensions: 2.5 x 1.4 x 0.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Chevrolet S10 Blazer Pressure Vent
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$47.61 MSRP: $89.83
You Save: $42.22 (47%)
Product Specifications- Notes: S-Series
- Item Dimensions: 2.5 x 1.4 x 0.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Chevrolet S10 Blazer Pressure Vent
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$47.61 MSRP: $89.83
You Save: $42.22 (47%)
Product Specifications- Notes: S-Series
- Item Dimensions: 2.5 x 1.4 x 0.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Chevrolet S10 Blazer Pressure Vent
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
$47.61 MSRP: $89.83
You Save: $42.22 (47%)
Product Specifications- Notes: w/ LTR4 Compressor; New w/ Clutch; w/ Pin Coil Connector;w/ R4 Compressor; New w/ Clutch; w/ Pin Coil Connector
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.250
- Coil Clock Position: 12
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 150
- Compressor Type: R4 Lightweight
- Distance From Clutch To Mounting Flange: 0.859375
- Mounting Hardware: Not Included
- Mounting Type: Case Mount
- New or Reman: New
- O-Ring A Number/Desc: [24355] / Sealing Washer
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24354] / Sealing Washer
- O-Ring B Quantity: 1
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 107.950
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.250
- Pulley Outside Diameter: 4.250
- Pulley Ridge Diameter: 4.250
- Refrigerant Type: R134a
- Suc Prt Typ Note: w/ 5/8" x 3/4" Ports
- Suction Port Type: Sealing Washer
- Switch Included: High Pressure
- Terminal Type: 8mm Pin Connector
- UPC: 096361589483
- Part Description: 1992 Chevrolet S10 Blazer A C Compressor With Clutch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: w/ LTR4 Compressor; New; w/ Pin Coil Connector
- Belt Type: Serpentine
- Belt Width IN: 0.875
- Can Size: w/ Coil
- Clutch Maximum Diameter: 4.250
- Coil: w/ Coil
- Coil Number: [48260] / Clutch Assembly
- Coil Voltage: 12
- Color: Black
- Groove: 6
- Hub Number: [48240] / Clutch Assembly
- Lead Wire : One Piece Coil
- Material: Steel
- Meets / Exceeds OEM: Yes
- Mounting Type: Press Fit
- Pulley Number: [48222] / Clutch Assembly
- Pulley Type: J
- Rotation: CCW-CW
- Style: Frigidaire/Harrison R4 Radial
- Thermal Or Non Thermal: NR
- UPC: 096361476561
- Part Description: 1992 Chevrolet S10 Blazer A C Compressor Clutch
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Core Depth Fraction: 3-5/8
- Core Depth MM: 92.075
- Core Height Fraction: 6-3/4
- Core Height MM: 171.450
- Core Width Fraction: 10-1/2
- Core Width MM: 266.700
- Depth: 3.625
- Height: 6.750
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24612] / Green O-Ring
- O-Ring B Quantity: 1
- O-Ring C Number/Desc: [38642] / Orifice Tube
- O-Ring C Quantity: 1
- Outlet Fitting Outside Diameter: No. 12
- UPC: 096361545205
- Width: 10.500
- Part Description: 1992 Chevrolet S10 Blazer A C Evaporator Core
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines
Product Specifications- Notes: Discharge & Suction Line
- Bracket: w/o Bracket
- Discharge End Style: UNF O-Ring
- Discharge End Type: Female O Ring
- Fittings Included: Not Included
- Gasket or Seal Included: Included
- Manifold: Yes
- Material: Aluminum / Rubber
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24612] / Green O-Ring
- O-Ring B Quantity: 1
- O-Rings Included: Included
- O.E. Replacement: Yes
- Refrigerant Type: R134a
- Service Port: w/o Service Port
- Suction End Style: UNF O-Ring
- Suction End Type: Female O Ring
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- UPC: 096361558632
- Part Description: 1992 Chevrolet S10 Blazer A C Discharge And Suction Line Hose Assembly
More Info Vehicle Fitment- 1992 Chevrolet S10 Blazer | All Trims | All Engines