145 products about 1991 GMC Syclone Driveline, Axles & 4WD found
Product Specifications- Notes: S-Series
- Item Dimensions: 11.6 x 2.0 x 1.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: Rear Cover Gasket
More Info $9.87 MSRP: $16.04
You Save: $6.17 (39%)
Product Specifications- Notes: 28 Spline; wo/4 Sensor System; 7.625" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.03"
- Material: Carbon Steel
- OE Part Number: 26013882
- Spline Quantity: 28 Spline
- UPC: 019495045748
- Wheel Lug Quantity: 5
- Part Description: OE Solutions Rear Passenger Side Axle Shaft
More Info Product Specifications- Notes: 1.375" I.D.; 2 Piece Drive Sh.
- Bolt Hole Center: 6.614"
- Inside Diameter: 1.377"
- Outside Diameter: 4.299"
- UPC: 085311391689
- Width: 1.889"
- Part Description: Driveshaft Center Support Bearing
More Info Product Specifications- Notes: Std Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal
- Bearing Cap Diameter Axis 1 (in): 1.0600
- Bearing Cap Diameter Axis 2 (in): 1.0600
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside/Outside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style/(OSR) Outside Snap Ring Style
- UPC: 083286109261
- Part Description: Grade Standard U-Joint
More Info Product Specifications- Notes: Uni-Fit; Joint Dia 3.5"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.5"
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: OE Solutions Front Inner Cv Joint Boot Kit
More Info Product Specifications- Notes: S-Series
- Other Names: Axle Bearing, Differential Bearings, Side Bearings
- Item Dimensions: 3.5 x 3.6 x 1.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20997053, 26051816, 9420095, 09420095
- Part Description: Side Bearings
More Info $43.75 MSRP: $82.56
You Save: $38.81 (48%)
Product Specifications- Notes: S-Series
- Other Names: Axle Bearing, Differential Bearings, Side Bearings
- Item Dimensions: 3.5 x 3.6 x 1.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20997053, 26051816, 9420095, 09420095
- Part Description: Side Bearings
More Info $43.75 MSRP: $82.56
You Save: $38.81 (48%)
Product Specifications- Notes: Incls Bearing & Support; w/1.378in Bearing ID; w/35mm Bearing ID; Slip Yoke Style; w/Spicer 1280,1310,1330,1410 U-Joint(s)
- Bolt Holes (Inch): 6.6240
- Centerline Height: 2.28"
- Inside Diameter: 1.378"
- Outside Diameter: 2.834"
- Type: 2
- Width: 6.624"
- Part Description: Driveshaft Center Support Bearing
More Info Product Specifications- Notes: Only Works w/Dorman Driveshaft 938-217
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Finish: Steel
- Coating Type: Grease
- Color/Finish: Silver
- Greasable: No
- Grease Type: Multi Purpose Bearing Grease
- Grease Zerks Included: No
- Length Between Inside Snap Rings Axis 1 (In): 2.438"
- Length Between Inside Snap Rings Axis 2 (In): 2.438"
- Package Contents: 1 Universal Joint, 4 Snap Rings
- Pre Greased: Yes
- Seal Material: Rubber
- Snap Ring Type: External
- Universal Joint Cross Material: Steel
- UPC: 885484839328
- Part Description: Rear Driveshaft Repair Kit
More Info Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; Press-On Slip Yoke Seal
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: Grade Performance™ Rear U-Joint
More Info Product Specifications- Notes: Bearing Only; w/o 2 Piece Drive Sh.
- Inside Diameter: 1.378"
- Outside Diameter: 2.834"
- UPC: 085311067119
- Width: 0.984"
- Part Description: Driveshaft Center Support Bearing
More Info Product Specifications- Notes: w/Borg-Warner 4472 Transfer Case; 1Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: Driveshaft Center Support Bearing
More Info Product Specifications- Notes: Uni-Fit; Joint Dia 3.44";Uni-Fit; Joint Dia 3.44"; Packaging Type: Box; Pkg Quantity: 1
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: OE Solutions Front Outer Cv Joint Boot Kit
More Info Product Specifications- Notes: S-Series
- Other Names: Axle Seal, Seal
- Item Dimensions: 2.9 x 2.9 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: Axle Seal
More Info $1.12 MSRP: $1.75
You Save: $0.63 (36%)
Product Specifications- Notes: w/Borg-Warner 4472 Transfer Case; 1Spd; Full Time 4WD; w/o Boot;w/Borg-Warner 4472 Transfer Case; 1Spd; Full Time 4WD
- Type: 87
- Part Description: Differential Crankshaft Seal
More Info Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; Inside Lock Rings
- Bearing Cap Diameter: 1.125"
- Lock Ring Type: Internal
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286531055
- Part Description: Grade Performance™ Rear U-Joint
More Info Product Specifications- Color/Finish: Gray
- Differential Cover Bolt Count: 10
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: No
- Differential Cover/Case Material: Low Carbon Steel
- Gasket Material: Not Applicable
- Gasket or Seal Included: No
- OE Part Number: 12471370
- UPC: 019495114963
- Part Description: OE Solutions Differential Cover
More Info Product Specifications- Notes: with GMC Axle; with 7.625in Ring Gear
- Part Description: Rear Inner Differential Pinion Race
Product Specifications- Notes: S-Series
- Item Dimensions: 3.0 x 3.0 x 1.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: Outer Pinion Bearing
More Info $36.11 MSRP: $68.16
You Save: $32.05 (48%)
Product Specifications- Notes: S-Series
- Item Dimensions: 3.0 x 3.0 x 1.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: Outer Pinion Bearing
More Info $36.11 MSRP: $68.16
You Save: $32.05 (48%)
Product Specifications- Notes: Std Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: Spicer 1310 Series Grade Standard U-Joint
More Info Product Specifications- Notes: with GMC Axle; with 7.625in Ring Gear
- Part Description: Differential Bearing
Product Specifications- Notes: w/7.500" & 7.625" Ring Gears
- Cone ID: 1.437"
- Cone Length: 1.135"
- Cone Radius: 0.14"
- UPC: 085311071123
- Width: 1.156"
- Part Description: Rear Inner Axle Shaft Bearing
More Info Product Specifications- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 031447984073
- Width (Inch): 3.50
- Part Description: Universal Joint Strap Kit
More Info Product Specifications- Notes: w/7.500" & 7.625" Ring Gears
- Bore: 2.656"
- Boretite: No
- Outer Diameter: 2.66"
- Shaft: 1.5240"
- UPC: 085311308243
- Width: 0.607"
- Part Description: Rear Differential Pinion Seal
More Info Product Specifications- Notes: S-Series
- Other Names: Bushing, Upper Bushing, Upper Control Arm Bushing
- Item Dimensions: 3.2 x 2.2 x 2.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: Upper Bushing
More Info $17.93 MSRP: $29.66
You Save: $11.73 (40%)
Product Specifications- Notes: with GMC Axle; with 7.625in Ring Gear
- Part Description: Differential Carrier Race
Product Specifications- Notes: Incl 4 Outside & 2 Inside Lock Rings; Std Grade; Grease Fitting in Cross; Screw-On Slip Yoke Seal
- Bearing Cap Axis 1 Diameter: 27
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Grooved
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.21
- Length Axis 2: 2.21
- Lock Ring Location: External, Internal
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel
- Mounting Hardware Included: Yes
- UPC: 083286003507
- Weight (Gross Pounds): 1.0
- Width (Inch): 3.50
- Part Description: Grade Standard U-Joint
More Info Product Specifications- Notes: S-Series
- Item Dimensions: 3.6 x 3.6 x 1.6 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: Front Pinion Bearing
More Info $66.26 MSRP: $125.04
You Save: $58.78 (48%)
Product Specifications- Notes: 7.25" Ring Gear
- Bore: 2.656"
- Boretite: No
- Outer Diameter: 2.66"
- Shaft: 1.520"
- UPC: 085311015523
- Width: 0.425"
- Part Description: Front Differential Pinion Seal
More Info