8 products about 1990 Nissan Stanza Spark Plugs & Wires found
Product Specifications- Notes: OE Replacement Part / Complete Ignition Wire Set - 7mm
- Distributor Coil End Terminal Type: Male
- Outside Diameter: 0.275"
- Spark Plug Boot End Angle: 120 Degrees
- Spark Plug Boot Material: Silicone
- Spark Plug End Boot Quantity Angled: 1
- Spark Plug End Boot Quantity Straight: 3
- Spark Plug End Terminal Type: Female
- UPC: 042511085473
- Wire Diameter: 7 mm
- Part Description: 1990 Nissan Stanza Spark Plug Wire Set
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- UPC: 724620167997
- Part Description: 1990 Nissan Stanza Spark Plug Wire Set
Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Gap 0.044; OE Recommended Resistor Plug w/Patented U-Groove Design
- Center Electrode Core Material: Copper
- Center Electrode Material: Nickel
- Gap: 0.044"
- Ground Configuration: Standard
- Ground Electrode Core Material: Nickel
- Ground Electrode Quantity: 1
- Ground Electrode Tip Design: U-Groove
- Heat Range: 16
- Hex Size: 16 mm
- Resistance: 5 kOhm
- Spark Plug Seat Style: Gasket
- Thread Diameter: 0.551"
- Thread Reach: 0.866"
- UPC: 042511031357
- Part Description: 1990 Nissan Stanza Original U-Groove Nickel Spark Plug
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Sentra; W/Fuel Inj
- Item Dimensions: 8.4 x 8.5 x 3.1 inches
- Item Weight: 1.50 Pounds
- Replaces: 22450-84A25
- Part Description: 1990 Nissan Stanza H.T. Cable 7M
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Stanza; W/O Wagon; W/Fuel Inj
- Other Names: Cable Set
- Item Dimensions: 12.7 x 10.2 x 1.0 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22450-30R25
- Part Description: 1990 Nissan Stanza Cable Set-High Tension
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Gap 0.044; OE Recommended Resistor Plug w/Patented U-Groove Design
- Center Electrode Core Material: Copper
- Center Electrode Tip Material: Nickel
- Ground Configuration: Standard
- Ground Electrode Core Material: Nickel
- Ground Electrode Quantity: 1
- Ground Electrode Tip Design: U-Groove
- Hex Size: 16.0
- Manufacturer Heat Range: 16
- Pre-Gap Size: 0.044
- Reach: 22.00
- Resistance: 5000
- Seat Type: Gasket
- UPC: 042511031357
- Part Description: 1990 Nissan Stanza Original U-Groove™ Spark Plug
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Pulsar; W/O Turbo; Se
- Other Names: Cable Set
- Item Dimensions: 15.1 x 14.7 x 1.6 inches
- Item Weight: 1.50 Pounds
- Part Description: 1990 Nissan Stanza Cable Set High Tension
More Info Vehicle Fitment- 1990 Nissan Stanza | GXE, XE | 4 Cyl 2.4 L GAS
Product Specifications- Notes: Maxima
- Other Names: Cable Set
- Item Dimensions: 12.6 x 7.1 x 2.0 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Cable Set (High Tension)
More Info Vehicle Fitment- 1990 Nissan Stanza | GXE, XE | 4 Cyl 2.4 L GAS