154 products about 1990 Nissan Stanza A/C & Heating found
Product Specifications- Item Dimensions: 3.6 x 2.7 x 2.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Sensor Assy-Temperature
More Info Vehicle Fitment- 1990 Nissan Stanza | GXE, SE, XE | 4 Cyl 2.4 L GAS
$60.03 MSRP: $82.02
You Save: $21.99 (27%)
Product Specifications- Notes: Cut to Length, 4"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 19 mm
- End 2 Inside Diameter: 19 mm
- Material: EPDM
- OE Part Number: 49693
- UPC: 072053066326
- Weight Per Length: 13.20 lbs./Carton
- Working Pressure: 50 PSI
- Part Description: 1990 Nissan Stanza Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/ NVR140S Compressor; Reman w/ Clutch; Calsonic, Nihon
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: NVR140S
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 1.59375
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24681] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24661] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 120.650
- Pulley Groove Quantity: 4
- Pulley Lip Diameter: 4.750
- Pulley Outside Diameter: 4.750
- Pulley Ridge Diameter: 4.750
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Switch Included: Heat Sensor
- Terminal Type: Spade
- UPC: 096361574465
- Part Description: 1990 Nissan Stanza Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Pulsar; W/O Se;Sentra; Gas
- Other Names: Idler Pulley, Pulley
- Item Dimensions: 3.7 x 3.2 x 3.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11927-77A10, 11925-77A00, 11925-77A01
- Part Description: 1990 Nissan Stanza PULLEY Assembly-IDLER Compressor
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$118.22 MSRP: $161.52
You Save: $43.30 (27%)
Product Specifications- Notes: Cut to Length, 4"
- Centerline Length: 50 ft
- End 1 Inside Diameter: .625 in
- End 2 Inside Diameter: .625 in
- Material: EPDM
- OE Part Number: 8990
- UPC: 072053066319
- Weight Per Length: 11.70 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 1990 Nissan Stanza Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/o Wheel
- Cage Wheel Included: w/o Wheel
- Connector Gender: Female
- Connector qty: 1
- Flanged End: Yes
- Material: Metal
- Motor Diameter: 3.250
- Motor Length: 4.125
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: 2
- O.E. Replacement: Yes
- Rotation: CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.6875
- Shaft Shape: Round
- Shaft Type: Round
- Style: Flanged
- Terminal Type: 2 Lead Wires w/ Connector
- UPC: 096361354388
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1990 Nissan Stanza Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Item Dimensions: 2.1 x 1.5 x 1.1 inches
- Item Weight: 0.60 Pounds
- Material: Rubber
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Mounting Rubber
More Info Vehicle Fitment- 1990 Nissan Stanza | GXE, SE, XE | 4 Cyl 2.4 L GAS
$7.55 MSRP: $10.30
You Save: $2.75 (27%)
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 3/8
- End 2 Inside Diameter: 3/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 12 1/2
- UPC: 038244597642
- Part Description: 1990 Nissan Stanza Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 1990 Nissan Stanza Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Pulsar; W/Nx;Sentra
- Item Dimensions: 3.6 x 2.7 x 2.6 inches
- Item Weight: 0.80 Pounds
- Replaces: 27150-01G00, 27150-01N00, 27150-01G01, 27150-51S00, 27150-51S01, 27150-51S10
- Part Description: 1990 Nissan Stanza Resistance-Electric
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$21.83 MSRP: $29.83
You Save: $8.00 (27%)
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 9/32
- End 2 Inside Diameter: 9/32
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 5
- UPC: 038244597505
- Part Description: 1990 Nissan Stanza Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Connector Gender: Female
- Connector Shape: Rectangle
- Meets / Exceeds OEM: Yes
- Number of Terminals: 4
- Speed: Fixed # 3
- Terminal Type: Spade
- UPC: 096361201330
- Part Description: 1990 Nissan Stanza Hvac Blower Motor Resistor
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Color: Gray
- Comp Open/Closed: Open
- Connector Gender: Female
- Connector Shape: Round
- Fitting Gender: Female
- Fitting Thread Size: 3/8 in. x 24
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mounted
- Number of Terminals: 2
- Operate Psi Low Off: 33
- Operate Psi Low On: 34
- Style: Binary
- UPC: 096361209879
- Weather Pack: Yes
- Part Description: 1990 Nissan Stanza A C Compressor Cut Out Switch
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Angle: 90
- Arm Length 1 (in): 4
- Arm Length 1 (mm): 102
- Arm Length 2 (in): 6
- Arm Length 2 (mm): 152
- Centerline Length (in): 10
- Centerline Length (mm): 254
- End 1 Inside Diameter: 0.75 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 9016
- UPC: 072053062083
- Part Description: 1990 Nissan Stanza 90 Degree Hvac Heater Molded Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Maxima; Auto Air
- Other Names: Resistor
- Item Dimensions: 3.1 x 3.2 x 1.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Resistance-Electric
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$19.29 MSRP: $26.33
You Save: $7.04 (27%)
Product Specifications- Connector Shape: Rectangle
- Gender: Male
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 4
- UPC: 096361372573
- Part Description: 1990 Nissan Stanza A C Clutch Control Relay Harness Connector
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 15.6"
- Inside Diameter 1 (in): 0.38"
- Number of Branches: 0
- UPC: 072053178050
- Part Description: 1990 Nissan Stanza Hvac Heater Molded Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
![Four Seasons](/wwwasset/images/APP/brand/four_seasons.png)
Product Specifications- Body Diameter: 2.500
- Body Length: 6.000
- Bracket: w/o Bracket
- Connector B Type: Pad Mount
- Connector Type: Pad Mount
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 63.500
- Fuse Plug: No
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Pad Mount
- Inlet Filter Fitting Type: Pad Mount
- Inlet Fitting Diameter: 0.5625
- Inlet Fitting Type: Pad Mount
- Length MM: 152.400
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- New or Reman: New
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24646] / Green Round O/Ring
- O-Ring B Quantity: 1
- O-Ring C Number/Desc: [24650] / Green O-Ring
- O-Ring C Quantity: 2
- Outlet Fitting Type: Pad Mount
- Outlet Fraction: 3/8
- Outlet IN: 0.375
- Overall Depth IN: 6.000
- Overall Depth MM: 152.400
- P. R. V.: No
- Pad Mount: w/ Pad Mount
- Service Port: w/o Service Port
- Sight Glass: No
- Stud: No
- Style: Aluminum Filter Drier w/ Pad Mount
- Switch Port: w/ Switch Port
- UPC: 096361335936
- Part Description: 1990 Nissan Stanza A C Receiver Drier
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Centerline Length (in): 6.5
- Centerline Length (mm): 165
- End 1 Inside Diameter: 0.28 in
- End 2 Inside Diameter: 0.28 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 1945
- UPC: 072053178241
- Part Description: 1990 Nissan Stanza Hvac Heater Molded Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings
- Style: O-Ring & Gasket Kit
- UPC: 096361267473
- Part Description: 1990 Nissan Stanza A C System O Ring And Gasket Kit
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Caps and Valve Core Seal Kit; w/ R12 or R134a Retrofit System
- Cap Color: Red, Blue, Black
- Cap Inside Diameter: Specific
- Cap Material: Plastic
- Material: Aluminum
- Refrigerant Type: R12, R134a
- Style: Cap & Valve Kit
- UPC: 096361267770
- Valve Core Material: Specific
- Part Description: 1990 Nissan Stanza A C System Valve Core And Cap Kit
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 2 Inside Diameter: 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 038244597512
- Part Description: 1990 Nissan Stanza Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Color: Brass
- Refrigerant Type: R134A
- Super Heat: 2.5
- UPC: 096361392403
- Part Description: 1990 Nissan Stanza A C Expansion Valve
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Maxima;W/Ac; Maxima; Auto Control;W/O Ac; Maxima; Auto Control
- Other Names: Control Module
- Item Dimensions: 18.3 x 11.8 x 3.3 inches
- Item Weight: 2.50 Pounds
- Replaces: 28525-85E00
- Part Description: 1990 Nissan Stanza Controller-A/C
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Maxima; Part Of Control Assy
- Item Dimensions: 4.1 x 4.1 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Switch-Fan
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Maxima; Part Of Control Assy
- Item Dimensions: 4.1 x 4.1 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Switch-Fan
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Maxima; Part Of Control Assy
- Item Dimensions: 4.1 x 4.1 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Switch-Fan
More Info Vehicle Fitment- 1990 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Item Dimensions: 11.1 x 8.7 x 7.9 inches
- Item Weight: 13.40 Pounds
- Replaces: 92600-65E00, 92600-65E02, 92600-65E01, 92600-65E03
- Part Description: 1990 Nissan Stanza Compressor
More Info Vehicle Fitment- 1990 Nissan Stanza | GXE, SE, XE | 4 Cyl 2.4 L GAS
Product Specifications- Notes: OE recommended replacement part.
- Body Diameter: 63.500
- Body Length: 152.400
- Inlet Fitting Type: FEMALE
- Material: Aluminum
- New or Remanufactured: NEW
- Outlet Fitting Type: FEMALE
- UPC: 042511221659
- Part Description: 1990 Nissan Stanza A/C Receiver Drier
More Info Vehicle Fitment- 1990 Nissan Stanza | All Trims | 4 Cyl 2.4L
Product Specifications- Other Names: Fan Assembly
- Item Dimensions: 31.5 x 20.1 x 5.7 inches
- Item Weight: 12.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 Nissan Stanza Motor Assy-Fan & Shroud
More Info Vehicle Fitment- 1990 Nissan Stanza | GXE, SE, XE | 4 Cyl 2.4 L GAS