125 products about 1989 Toyota Corolla A/C & Heating found
Product Specifications- Item Dimensions: 15.3 x 11.4 x 3.2 inches
- Item Weight: 1.20 Pounds
- Part Description: 1989 Toyota Corolla Idler Pulley
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, CE, DLX, DLX All Trac, DX, LE, SR5 All Trac | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
$40.63 MSRP: $58.53
You Save: $17.90 (31%)
Product Specifications- Notes: Hd
- Other Names: Heater Assembly
- Fitment Type: Direct Replacement
- Part Description: 1989 Toyota Corolla Heater Assembly
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, DLX, DLX All Trac, LE, SR5 All Trac | 4 Cyl 1.6 L GAS
$845.10 MSRP: $1246.21
You Save: $401.11 (33%)
Product Specifications- Notes: All Models
- Item Dimensions: 2.3 x 1.4 x 1.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89424-33010, 89424-12010
- Part Description: 1989 Toyota Corolla Air Intake Temperature Sensor
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, CE, DLX, DLX All Trac, DX, FX, FX16, FX16 GTS, GTS, LE, S, SR5, SR5 All Trac, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
$84.94 MSRP: $123.41
You Save: $38.47 (32%)
Product Specifications- Notes: Cut to Length, 7"
- Centerline Length: 50 ft
- End 1 Inside Diameter: .625 in
- End 2 Inside Diameter: .625 in
- Material: EPDM
- OE Part Number: 8990
- UPC: 072053066319
- Weight Per Length: 11.70 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 1989 Toyota Corolla Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Clutch Maximum Diameter: 140.0 mm
- Compressor Mount Hole Quantity: 4
- Mounting Type: Bolt Tangent
- OE Part Number: 8832012520, 8832012830, 8832012720, 8831012760, 8832012740, 8832012540, 8831012761, 8832012710, 8832012350
- Pulley Belt Type: Serpentine
- Refrigerant Type: R12
- UPC: 042511165496
- Part Description: 1989 Toyota Corolla A/C Compressor with Clutch
More Info Vehicle Fitment- 1989 Toyota Corolla | DLX | 4 Cyl 1.6L
- 1989 Toyota Corolla | DLX All Trac | 4 Cyl 1.6L
- 1989 Toyota Corolla | LE | 4 Cyl 1.6L
- 1989 Toyota Corolla | SR5 | 4 Cyl 1.6L
- 1989 Toyota Corolla | SR5 All Trac | 4 Cyl 1.6L
Show More Product Specifications- Connector Gender: Female
- Connector Quantity: 1
- Gasket or Seal Included: No
- Mount Hole Quantity: 1
- Mounting Hardware Included: No
- OE Part Number: 8713812120, 8713801020
- Package Contents: 1 Blower Motor Resistor Kit
- Package Quantity: 1
- Packaging Type: Box
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 889245162458
- Wire Harness Included: Yes
- Wire Harness Length: 6 In.
- Wire Quantity: 4
- Part Description: 1989 Toyota Corolla Hvac Blower Motor Resistor Kit
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines
Product Specifications- Notes: 4 Blade
- Connector Quantity: 1
- Connector Type: Male
- Fan Blade Material: Plastic
- Mount Type: Brushed
- OE Part Number: 88453-01020, 88454-01020, 8845412100, 88550-01020, 88590-01030, 8859012170, 8845312050, 8855012120, TO3120101
- Package Contents: Condenser Fan Assembly
- Package Quantity: 1
- Packaging Type: Box
- Shroud Included: Yes
- Shroud Material: Stamped Steel
- Terminal Quantity: 2
- UPC: 019495037460
- Part Description: 1989 Toyota Corolla A C Condenser Fan Assembly
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: All Models;All Models; Corolla
- Other Names: Temperature Sensor
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1989 Toyota Corolla Air Intake Temperature Sensor
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, DLX, DLX All Trac, FX, FX16, FX16 GTS, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
$141.50 MSRP: $205.59
You Save: $64.09 (32%)
Product Specifications- Notes: w/ 10PA15C Compressor; Reman w/ Clutch; May Require use of OE Manifold
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA15C
- Distance From Clutch To Mounting Flange: 2.09375
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New Compressor w/o Clutch: [58341] / Clutch Assembly
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 120.650
- Pulley Groove Quantity: 4
- Pulley Lip Diameter: 4.750
- Pulley Outside Diameter: 4.750
- Pulley Ridge Diameter: 4.750
- Refrigerant Type: R134a
- Reman w/o Clutch: [57341] / Clutch Assembly
- Suction Port Type: Pad Mount
- Terminal Type: Pin
- UPC: 096361573697
- Part Description: 1989 Toyota Corolla Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines
Product Specifications- Notes: Cut to Length, 9"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.3125"
- OE Part Number: 49692
- UPC: 072053133226
- Weight Per Length: 7.25 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 1989 Toyota Corolla Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Other Names: Expansion Valve
- Item Dimensions: 8.3 x 6.2 x 4.3 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88515-03010
- Part Description: 1989 Toyota Corolla Expansion Valve
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
$59.19 MSRP: $86.00
You Save: $26.81 (32%)
Product Specifications- Notes: To 12/1988; DENSO is the OE supplier for this vehicle; OE-specified O-rings Incld.
- Body Diameter (mm): 59.00
- Body Length (mm): 152.0000
- Material: Steel
- Type: Block Union
- UPC: 042511076013
- Part Description: 1989 Toyota Corolla A/C Receiver Drier
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Centerline Length (in): 14.8"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053179606
- Part Description: 1989 Toyota Corolla Hvac Heater Molded Hose
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: w/ 10PA15C Compressor; New w/o Clutch; May Require use of OE Manifold
- Clutch Included: No
- Coil Clock Position: Non Clutch
- Coil Voltage: NR
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA15C
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Non-Clutch
- Pulley Groove Quantity: NR
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- UPC: 096361583412
- Part Description: 1989 Toyota Corolla A C Compressor Without Clutch
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines
Product Specifications- Notes: Hd
- Other Names: Core, Heater Core
- Item Dimensions: 13.1 x 11.3 x 8.5 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1989 Toyota Corolla Core
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
$348.12 MSRP: $513.36
You Save: $165.24 (33%)
Product Specifications- Notes: Suction Line;Suction Line; 4AF Eng Design or 4AFE Eng Design
- Bracket: w/o Bracket
- Component Type: Suction Line
- End 1 Type: Female O-Ring
- End 2 Type: Female O-Ring
- Fittings Included: Included
- Gasket or Seal Included: Included
- Material: Aluminum / Rubber
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24610] / Green O-Ring
- O-Ring A Quantity: 2
- O.E. Replacement: Yes
- Refrigerant Type: R12
- Service Port: w/o Service Port
- Suction End Type: P-Nut Fitting
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- System Pressure: Low Pressure
- UPC: 096361553521
- Part Description: 1989 Toyota Corolla A C Suction Line Hose Assembly
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: 4 Speed Auto Trans;Manual Trans; Corolla; Gas; 2WD; Auto Trans; 4 Speed;Corolla; Gas; 2WD; Manual Trans
- Other Names: Fan Motor, Motor
- Item Dimensions: 8.2 x 3.9 x 3.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16363-02011
- Part Description: 1989 Toyota Corolla Fan Motor
More Info Vehicle Fitment- 1989 Toyota Corolla | DLX, DLX All Trac, FX, FX16, FX16 GTS, GTS, LE, LE Limited, Sport DLX, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
$239.42 MSRP: $347.83
You Save: $108.41 (32%)
Product Specifications- Centerline Length (in): 20.76"
- Inside Diameter 1 (in): 0.61"
- Number of Branches: 0
- UPC: 072053631159
- Part Description: 1989 Toyota Corolla Hvac Heater Molded Hose
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: Discharge Line;Discharge Line; 4AF Eng Design or 4AFE Eng Design
- Bracket: w/o Bracket
- Component Type: Discharge Line
- Fittings Included: Included
- Gasket or Seal Included: Included
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 2
- O.E. Replacement: Yes
- Refrigerant Type: R12, R134a
- Service Port: w/o Service Port
- Suction End Type: P-Nut Fitting
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- UPC: 096361553422
- Part Description: 1989 Toyota Corolla A C Discharge Line Hose Assembly
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Other Names: Core, Evaporator Core
- Item Dimensions: 16.3 x 12.1 x 8.2 inches
- Item Weight: 6.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88501-01020
- Part Description: 1989 Toyota Corolla Core
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
$298.33 MSRP: $433.41
You Save: $135.08 (32%)
Product Specifications- Other Names: Core, Evaporator Core
- Item Dimensions: 16.3 x 12.1 x 8.2 inches
- Item Weight: 6.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88501-01020
- Part Description: 1989 Toyota Corolla Core
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
$298.33 MSRP: $433.41
You Save: $135.08 (32%)
Product Specifications- Notes: Plate Fin
- Core Depth Fraction: 3-1/2
- Core Depth MM: 88.900
- Core Height Fraction: 8-3/4
- Core Height MM: 222.250
- Core Width Fraction: 9-1/4
- Core Width MM: 234.950; 235.000
- Depth: 3.500
- Height: 8.750
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24604] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24608] / Green O-Ring
- O-Ring B Quantity: 1
- O-Ring C Number/Desc: [24610] / Green O-Ring
- O-Ring C Quantity: 1
- Outlet Fitting Outside Diameter: No. 10
- UPC: 096361542655
- Width: 9.250
- Part Description: 1989 Toyota Corolla A C Evaporator Core
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 1989 Toyota Corolla Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Blade Material: Metal; Plastic
- Blade Type: Rigid
- Connector Gender: Female; Male
- Connector qty: 1
- Connector Shape: Rectangle
- Connector Type: 2 wire lead w/ Connector
- Electrical or Mechanical: Electrical
- Fan 1 Blade Quantity: 6
- Fan Clutch Mounted: Fan clutch not mounted within the assembly.
- Fan Quantity: 1
- Height IN: 14.500
- Housing Finish: Black
- Hub Bolt Hole Quantity: OE Mount
- Material: Plastic / Metal
- Motor Type A: Condenser Fan
- Mount Location: Condenser Fan
- Mount Type: OE mount
- Mounting Hardware: Not Included
- O.E. Replacement: Yes
- Package Depth IN: 17.000
- Package Depth MM: 431.800
- Package Height IN: 3.375
- Package Height MM: 85.725
- Package Length IN: 13.500
- Package Length MM: 342.900
- Performance Rated: Yes
- Shroud Included: Included
- Shroud Material: NA; Steel
- Style: Condenser Fan
- Terminal Gender: Male
- Terminal Quantity: 2
- UPC: 096361754119
- Voltage: 12
- Width IN: 14.500
- Part Description: 1989 Toyota Corolla A C Condenser Fan Assembly
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines
Product Specifications- Branch Quantity: 0
- Centerline Length (in): 9.7
- Centerline Length (mm): 246
- End 1 Inside Diameter: 0.62 in
- End 2 Inside Diameter: 0.62 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 2276
- UPC: 072053178883
- Part Description: 1989 Toyota Corolla Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: w/o Wheel
- Cage Wheel Included: w/o Wheel
- Connector Gender: Female
- Connector qty: 1
- Flanged End: Yes
- Material: Metal
- Motor Dia. MM: 76.200
- Motor Diameter: 3.000
- Motor Length: 4.125
- Motor Length MM: 104.775
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: 2
- O.E. Replacement: Yes
- Rotation: CW/CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.3125
- Shaft Shape: D-Shaped
- Shaft Type: D-Shaped
- Style: Flanged
- Terminal Type: 2 Lead Wires w/ Connector
- UPC: 096361356344
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1989 Toyota Corolla Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines
Product Specifications- Notes: Corolla; Coupe; W/O GTS; From 1/88;Corolla; Liftback, Sedan, Wagon; Gas; Japan Built
- Other Names: Compressor Pulley, Rotor
- Item Dimensions: 5.9 x 5.3 x 2.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1989 Toyota Corolla Compressor Pulley
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, DLX, DLX All Trac, DX, FX, FX16, FX16 GTS, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
$287.99 MSRP: $418.39
You Save: $130.40 (32%)
Product Specifications- Bypass: No
- Hose Connector Quantity: 2 Connectors
- Material: Plastic
- O.E. Replacement: Yes
- Opening B IN: 0.625
- Opening B MM: 15.875
- Opening IN: 0.625
- Opening MM: 15.875
- Operation Type: Cable Operated
- Style: Non-Bypass
- UPC: 096361746374
- Part Description: 1989 Toyota Corolla Hvac Heater Control Valve
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines
Product Specifications- Notes: Corolla; Coupe; W/O GTS;Corolla; Liftback, Sedan, Wagon
- Other Names: Shaft Seal Kit, Shaft Seals
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88360-2B010, 88360-14030
- Part Description: 1989 Toyota Corolla Clutch Hub Assembly
More Info Vehicle Fitment- 1989 Toyota Corolla | Base, CE, DLX, DLX All Trac, DX, FX, FX16, FX16 GTS, GTS, LE, S, SR5, SR5 All Trac, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
$81.07 MSRP: $117.78
You Save: $36.71 (32%)
Product Specifications- Notes: Hi-Side Mounted
- Connector Color: Black; Gray
- Connector Gender: Male
- Connector Shape: Round
- Fan Open/Closed: Closed
- Fitting Gender: Male
- Fitting Thread Size: 3/8 in. x 24
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mounted
- Operate Psi Med Off: 180
- Operate Psi Med On: 224; 225
- Style: Pressure
- Terminal Quantity: 2
- UPC: 096361209664
- Part Description: 1989 Toyota Corolla A C Condenser Fan Switch
More Info Vehicle Fitment- 1989 Toyota Corolla | All Trims | All Engines