149 products about 1989 Jeep Comanche Driveline, Axles & 4WD found
Product Specifications- Notes: Dana 44 Axle
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Material: Carbon Steel
- OE Part Number: 4882350, 5083676AA, 83504960
- Spline Quantity: 30 Spline
- UPC: 019495452935
- Wheel Lug Quantity: 5
- Part Description: 1989 Jeep Comanche OE Solutions Rear Passenger Side Axle Shaft
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Centric Premium Oil & Grease Seal; Dana 35 Rear Axle
- UPC: 805890574828
- Part Description: 1989 Jeep Comanche Premium™ Axle Shaft Seal
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Master Kit; Dana 35 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487122
- Width: 2.50"
- Part Description: 1989 Jeep Comanche Rear Master Differential Rebuild Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Dana 35 Axle; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- OE Part Number: D35355
- UPC: 019495760801
- Part Description: 1989 Jeep Comanche OE Solutions Front Differential Ring And Pinion
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Outer Yoke Dimension: 3.875"
- UPC: 083286607828
- Part Description: 1989 Jeep Comanche Double Cardan CV Centering Yoke
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: w/New Process 242J Transfer Case; 2Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 1989 Jeep Comanche Driveshaft Center Support Bearing
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Standard Kit; Dana 44 Axle;Std; Dana 44 Axle:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470773
- Width: 2.50"
- Part Description: 1989 Jeep Comanche Front Differential Rebuild Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: w/4.10 Axle Ratio; Dana 30 Axle
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- OE Part Number: 83502353
- UPC: 019495515722
- Part Description: 1989 Jeep Comanche OE Solutions Front Differential Ring And Pinion
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: w/Spicer 35C Axle; w/7.59in Ring Gear
- Part Description: 1989 Jeep Comanche Front Inner Differential Pinion Bearing
Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Spicer 44 Axle
- Cone ID: 1.563"
- Outside Diameter: 2.876"
- UPC: 085311058643
- Width: 0.766"
- Part Description: 1989 Jeep Comanche Rear Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Standard Kit; Dana 35 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470728
- Width: 2.50"
- Part Description: 1989 Jeep Comanche Rear Differential Rebuild Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Dana 35 Axle; w/4.56 Axle Ratio; Carrier Break 3.31/3.54
- Gear Ratio: 4.56
- Item Grade: Standard Replacement
- OE Part Number: 83504377
- UPC: 019495515616
- Part Description: 1989 Jeep Comanche OE Solutions Front Differential Ring And Pinion
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: w/Spicer 30-AF Axle; w/7.125in Ring Gear;w/Spicer 35C Axle; w/7.59in Ring Gear
- Part Description: 1989 Jeep Comanche Differential Bearing
Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Perf Grade; Sealed Unit
- Bearing Cap Diameter: 1.063"
- Lock Ring Type: Internal
- Lubrication Method: Sealed Unit
- UPC: 083286502604
- Part Description: 1989 Jeep Comanche Grade Performance™ Front U-Joint
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Std Design; Dana 44 Axle
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495105190
- Part Description: 1989 Jeep Comanche OE Solution Front Ring And Pinion Bearing Installation Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: 35 & Spicer 35 Axles
- Cone ID: 1.406"
- Outside Diameter: 2.844"
- UPC: 085311256551
- Width: 1.218"
- Part Description: 1989 Jeep Comanche Inner Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: w/Spicer 30-AF Axle; w/7.125in Ring Gear;w/Spicer 35C Axle; w/7.59in Ring Gear
- Part Description: 1989 Jeep Comanche Differential Carrier Race
Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Dana 44 Axle; w/Limited Slip Differential
- Inside Diameter: 2.04"; 2.13"
- OE Part Number: 5252506
- Outside Diameter: 3.35"
- Package Contents: 1 Differential Clutch Kit
- Shim Material: Steel
- UPC: 037495175555
- Part Description: 1989 Jeep Comanche Oe Solution Differential Disc Kit Rear Differential
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Std Grade; Grease Fitting in Bearing Cap
- Bearing Cap Diameter Axis 1 (in): 1.0600
- Bearing Cap Diameter Axis 2 (in): 1.0600
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style
- UPC: 083286110564
- Part Description: 1989 Jeep Comanche Universal Joint
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: w/4 W/D:
- Cone ID: 1.375"
- Cone Length: 1"
- Cone Radius: 0.09"
- OE Part Number: 8970844670, 9036634019, 0019816905, C0DW4625A, 3156066, XW3706, 1549628, 926803, C0WD4625A, COWD4625A, 79192186, 5086690AA, 90368-34049, 9759HM88649, 33 12 1 468 894, 1-206-573, 2070079, 8729113, N058570, C0WD4630A, 2070070, 1L2Z1201AA, 1-204-304, 1458HM8
- UPC: 085311056199
- Width: 1"
- Part Description: 1989 Jeep Comanche Front Outer Axle Shaft Bearing
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Brute Force Greaseable
- Inside Lock-Up 1: 2.188"
- Outer Diameter: 1.063"
- UPC: 085311099776
- Part Description: 1989 Jeep Comanche Greaseable U Joint
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Std Design; Dana 35 Axle
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495105145
- Part Description: 1989 Jeep Comanche OE Solution Rear Ring And Pinion Bearing Installation Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 1989 Jeep Comanche Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Std Design; Dana 30 Axle
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495105244
- Part Description: 1989 Jeep Comanche OE Solution Front Ring And Pinion Bearing Installation Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Std Grade; Flush Type Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 27
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286002784
- Weight (Gross Pounds): 1.110
- Width (Inch): 3.50
- Part Description: 1989 Jeep Comanche Grade Standard U-Joint
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Dana 35 Axle;Dana 30 Axle
- Cone ID: 1.625"
- Cone Length: 0.78"
- Cone Radius: 0.14"
- Cup Length: 0.653"
- Cup Radius: 0.03"
- OE Part Number: 9759BR72
- Outside Diameter: 2.891"
- UPC: 085311281898
- Width: 0.843"
- Part Description: 1989 Jeep Comanche Rear Axle Shaft Bearing Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: 1/4-28 Bolts
- Bolt Length: 1/4-28"
- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 083286108196
- Width (Inch): 3.50
- Part Description: 1989 Jeep Comanche Universal Joint Strap Kit
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Housing Material: Metal and Plastic
- OE Part Number: 8350 3113
- Package Contents: 4wd Vacuum Actuator
- Terminal Quantity: Not Applicable
- Terminal Type: Pin
- UPC: 019495058984
- Wiring Harness Included: No
- Part Description: 1989 Jeep Comanche OE Solutions 4Wd Actuator
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 1989 Jeep Comanche Spicer 1310 Series Grade Standard U-Joint
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines
Product Specifications- Notes: w/4 W/D:;Dana 44 Axle
- Cone ID: 1.125"
- Cone Length: 0.875"
- Cone Radius: 0.03"
- Outside Diameter: 2.875"
- UPC: 085311052634
- Width: 0.875"
- Part Description: 1989 Jeep Comanche Front Inner Axle Shaft Bearing
More Info Vehicle Fitment- 1989 Jeep Comanche | All Trims | All Engines