33 products about 1988 Pontiac 6000 Power Steering Pumps & Components foundVEHICLE SPECIFIC Product Specifications Item Dimensions: 9.9 x 4.2 x 4.1 inches Item Weight: 0.50 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Dust Seal More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL $246.04 MSRP: $390.65
You Save: $144.61 (38%)
Check Fit Add to CartVEHICLE SPECIFIC Product Specifications Notes: without Aftermarket Filtration Improvement;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/Reservoir Aftermarket Filtration: Without Attribute: With Reservoir Hose Port: O-Ring Housing Material: Cast Iron Import or Domestic: Domestic Mounting Hardware: Without Power Steering Reservoir Cap: Without Pulley: Without Pulley Attachment Type: Press-on Pump Inlet Attachment Type: Hose Barb Pump Outlet Attachment Type: Threaded Thread Size: M16 x 1.5 Part Description: 1988 Pontiac 6000 Remanufactured Power Steering Pump w/Reservoir More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | 6 Cyl 2.8L 1988 Pontiac 6000 | All Trims | 6 Cyl 3.1L VEHICLE SPECIFIC Product Specifications Notes: Two Seal Design; w/AC-Delco Alternator; w/56, 66, 78, 85, 94, 108, 120 Amp Alternator Bore: 0.669" Inner Race Bore: 0.669" Inner Race Outside Diameter: 5.512" Inner Race Radius: 0.024" Inner Race Width: 0.472" Outer Race Outside Diameter: 1.575" Outer Race Radius: 0.024" Outer Race Width: 0.472" Outside Diameter: 1.575" Width Belt: 0.472" Part Description: 1988 Pontiac 6000 Power Steering Pump Shaft Bearing More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | All Engines VEHICLE SPECIFIC Product Specifications Notes: Our Magnetic In-Line Filter measures 2 1/4" X 5" w/12 mm Outer Dia Neck (Designed For Use w/1/2" ID Hose) & Will Only Fit Applications Where Space Allows. E-Waste: No Filter Material: Aluminum Filter Type: Inline Hose Inner Diameter (in): 1/2" Housing Material: Aluminum Inlet Diameter: 0.527" Installation Hardware Included: Hose Clamps (2) Outlet Diameter: 0.527" Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps Product Condition: New UPC: 082617974172 Part Description: 1988 Pontiac 6000 Power Steering Filter More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | All Engines VEHICLE SPECIFIC Product Specifications Notes: All Models; 2.5l Other Names: Power Steering Pump Seal Kit Item Dimensions: 6.1 x 3.1 x 0.2 inches Item Weight: 0.40 Pounds Part Description: 1988 Pontiac 6000 Power Steering Pump Seal Kit More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, Special Edition | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL $14.76 MSRP: $22.25
You Save: $7.49 (34%)
Check Fit Add to CartVEHICLE SPECIFIC Product Specifications Notes: All Models; 2.5l Other Names: Power Steering Pump Seal Kit Item Dimensions: 6.1 x 3.1 x 0.2 inches Item Weight: 0.40 Pounds Part Description: 1988 Pontiac 6000 Power Steering Pump Seal Kit More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, Special Edition | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL $14.76 MSRP: $22.25
You Save: $7.49 (34%)
Check Fit Add to CartVEHICLE SPECIFIC Product Specifications Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Aluminum Housing E-Waste: No Filter Material: Aluminum Filter Type: Inline Hose Inner Diameter (in): 3/8" Housing Material: Aluminum Inlet Diameter: 0.395" Installation Hardware Included: Hose Clamps (2) Outlet Diameter: 0.397" Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps Product Condition: New UPC: 082617953122 Part Description: 1988 Pontiac 6000 Power Steering Filter More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | All Engines VEHICLE SPECIFIC Product Specifications Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/5/8" Outer Dia Neck (For 5/8" ID Hose) & Will Only Fit Applications Where Space Allows. E-Waste: No Filter Material: Aluminum Filter Type: Inline Hose Inner Diameter (in): 5/8" Housing Material: Aluminum Inlet Diameter: 0.651" Installation Hardware Included: Hose Clamps (2) Outlet Diameter: 0.654" Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps Product Condition: New UPC: 884548041394 Part Description: 1988 Pontiac 6000 Power Steering Filter More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | All Engines VEHICLE SPECIFIC Product Specifications Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Plastic Housing E-Waste: No Filter Material: Aluminum Filter Type: Inline Hose Inner Diameter (in): 3/8" Housing Material: Plastic Inlet Diameter: 0.406" Installation Hardware Included: Hose Clamps (2), O-Ring Outlet Diameter: 0.415" Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps, O-Ring Product Condition: New UPC: 884548053915 Part Description: 1988 Pontiac 6000 Power Steering Filter More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | All Engines VEHICLE SPECIFIC Product Specifications Attribute: CRWA1 Bore: 1.312" Metal: cased with sealant coating on the outside diameter Nitrile rubber: NBR Outlet Diameter: 1.316" Shaft: 0.75" UPC: 085311005708 Width: 0.25" Part Description: 1988 Pontiac 6000 Power Steering Pump Shaft Seal More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | 6 Cyl 2.8L 1988 Pontiac 6000 | All Trims | 6 Cyl 3.1L VEHICLE SPECIFIC Product Specifications Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/o Reservoir Hose Port: O-Ring Housing Material: Cast Iron Import or Domestic: Domestic Mounting Hardware: Without Power Steering Reservoir Cap: Without Pulley: Without Pulley Attachment Type: Press-on Pump Inlet Attachment Type: Hose Barb Pump Outlet Attachment Type: Threaded Reservoir: Without Thread Size: M16 x 1.5 Part Description: 1988 Pontiac 6000 Remanufactured Power Steering Pump w/o Reservoir More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | 4 Cyl 2.5L VEHICLE SPECIFIC Product Specifications Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir Hose Port: O-Ring Housing Material: Cast Iron Import or Domestic: Domestic Mounting Hardware: Without Power Steering Reservoir Cap: Without Pulley: Without Pulley Attachment Type: Press-on Pump Inlet Attachment Type: Hose Barb Pump Outlet Attachment Type: Threaded Reservoir: Without Thread Size: M16 x 1.5 Part Description: 1988 Pontiac 6000 Remanufactured Power Steering Pump w/o Reservoir More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | 6 Cyl 2.8L 1988 Pontiac 6000 | All Trims | 6 Cyl 3.1L VEHICLE SPECIFIC Product Specifications UPC: 072053420463 Part Description: 1988 Pontiac 6000 Power Steering Pump Seal Kit Vehicle Fitment 1988 Pontiac 6000 | All Trims | 4 Cyl 2.5L VEHICLE SPECIFIC Product Specifications Notes: Valve Ring; All Models Other Names: Seal Kit, Steering Gear Seal Kit Item Dimensions: 7.4 x 7.2 x 11.6 inches Item Weight: 0.60 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Seal Kit-Valve Ring (Split Ring) More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL VEHICLE SPECIFIC Product Specifications UPC: 072053419627 Part Description: 1988 Pontiac 6000 Power Steering Pump Seal Kit Vehicle Fitment 1988 Pontiac 6000 | All Trims | 6 Cyl 2.8L 1988 Pontiac 6000 | All Trims | 6 Cyl 3.1L VEHICLE SPECIFIC Product Specifications UPC: 072053417906 Part Description: 1988 Pontiac 6000 Power Steering Pump Shaft Seal Vehicle Fitment 1988 Pontiac 6000 | All Trims | 6 Cyl 2.8L 1988 Pontiac 6000 | All Trims | 6 Cyl 3.1L VEHICLE SPECIFIC Product Specifications UPC: 072053417937 Part Description: 1988 Pontiac 6000 Power Steering Pump Shaft Seal Vehicle Fitment 1988 Pontiac 6000 | All Trims | 4 Cyl 2.5L VEHICLE SPECIFIC Product Specifications Notes: Pulley needs to be transferred w/proper pulley removal/install toll. UPC: 884109784043 Part Description: 1988 Pontiac 6000 Remanufactured Power Steering Pump More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | 4 Cyl 2.5L VEHICLE SPECIFIC Product Specifications Notes: Pulley needs to be transferred w/proper pulley removal/install toll. UPC: 843613104884 Part Description: 1988 Pontiac 6000 Remanufactured Power Steering Pump More Info Vehicle Fitment 1988 Pontiac 6000 | All Trims | 6 Cyl 2.8L VEHICLE SPECIFIC Product Specifications Notes: 6 Cylinder, Gas Other Names: Power Steering Pump Item Dimensions: 10.0 x 6.3 x 5.2 inches Item Weight: 4.50 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Pump Asm-P/S More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS VEHICLE SPECIFIC Product Specifications Notes: 4 Cylinder; 4 Cylinder;All Models; 2.5l Other Names: Power Steering Pump Item Dimensions: 10.1 x 8.6 x 6.8 inches Item Weight: 6.00 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Pump Asm-Hydraulic More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE | 4 Cyl 2.5 L GAS VEHICLE SPECIFIC Product Specifications Notes: W/Tilt Wheel, Complete, Upper Item Dimensions: 6.3 x 5.0 x 5.0 inches Item Weight: 1.50 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Steering Column Upper Shaft Assembly (W/Race) More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL VEHICLE SPECIFIC Product Specifications Notes: 4 Cylinder Other Names: Pump Reservoir, Reservoir Item Dimensions: 6.5 x 5.4 x 5.9 inches Item Weight: 1.30 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Reservoir Kit, P/S Fluid More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE | 4 Cyl 2.5 L GAS VEHICLE SPECIFIC Product Specifications Notes: 2WD Item Dimensions: 2.4 x 2.4 x 1.5 inches Item Weight: 0.30 Pounds Fitment Type: Direct Replacement Replaces: 7828084, 07828084 Part Description: 1988 Pontiac 6000 Seal, Steering Linkage Outer Tie Rod More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL VEHICLE SPECIFIC Product Specifications Notes: 6 Cylinder, Gas Other Names: Pump Reservoir, Reservoir Item Dimensions: 7.2 x 7.0 x 4.9 inches Item Weight: 1.30 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Reservoir Kit, P.S. Pump More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS VEHICLE SPECIFIC Product Specifications Notes: Pinion & Shaft; All Models; W/All Wheel Drive;Pinion & Shaft; All Models; W/O Ste Item Dimensions: 6.5 x 4.6 x 1.1 inches Item Weight: 0.50 Pounds Fitment Type: Direct Replacement Part Description: 1988 Pontiac 6000 Bearing Kit-Steering Gear Stub Shaft More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL VEHICLE SPECIFIC Product Specifications Notes: All Models; 2.8l, 3.1l Part Description: 1988 Pontiac 6000 Power Steering Pump Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS VEHICLE SPECIFIC Product Specifications Notes: All Models; 2.8l, 3.1l Part Description: 1988 Pontiac 6000 Power Steering Pump Seal Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS VEHICLE SPECIFIC Product Specifications Notes: All Models; 2.8l, 3.1l Part Description: 1988 Pontiac 6000 Power Steering Rebuild Kit Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, Special Edition, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS VEHICLE SPECIFIC Product Specifications Notes: Stub Shaft; All Models Other Names: Steering Gear Seal Kit Part Description: 1988 Pontiac 6000 Steering Gear Seal Kit More Info Vehicle Fitment 1988 Pontiac 6000 | Base, LE, SE, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 4.3 L DIESEL