< Back ×
My Vehicle Change Vehicle
1988 GMC V3500
National® Front Lower Steering Knuckle Seal for 1988 GMC V3500
PartNumber: 710304Product Specifications- Notes: w/Spicer 60-F Axle(s); w/9.75in Ring Gear
- Housing Bore: 2.563"
- Material: Nitrile
- Outer Diameter: 2.567"
- Shaft Diameter A: 1.479"
- Width: 0.47''
- Part Description: 1988 GMC V3500 Front Lower Steering Knuckle Seal
Vehicle Fitment- 1988 GMC V3500 | All Trims | All Engines
$13.04
Monroe® Magnum™ Front Steering Stabilizer for 1988 GMC V3500
PartNumber: SC2913Product Specifications- Notes: Replaces OE #(s) 3196958, 4941313, 4993563, 22002710
- Compressed Length: 14.15"
- Dust Shield: Without
- Extended Bumper Stop: Without
- Extended Hydraulic Lockout: Without
- Extended Length: 23.99"
- Lower Mounting: Loop Bushing Mount - 0.625" Bushing ID x 1.313" Bushing OAL
- UPC: 048598029027
- Upper Mounting: Loop Bushing Mount - 0.625" Bushing ID x 1.313" Bushing OAL
- Part Description: 1988 GMC V3500 Magnum™ Front Steering Stabilizer
Vehicle Fitment- 1988 GMC V3500 | All Trims | All Engines
$30.98
OEM (Genuine) 1988 GMC V3500 Damper
PartNumber: 88946674
Product Specifications- Other Names: Damper, Shock Absorber, Steering Damper
- Item Dimensions: 20.1 x 4.1 x 3.3 inches
- Item Weight: 4.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22064629
- Part Description: 1988 GMC V3500 Damper
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
$41.41 MSRP:$74.95You Save: $33.54 (45%)OEM (Genuine) 1988 GMC V3500 Shaft Unit-Steering Knuckle Lower Control Arm
PartNumber: 3901038
Product Specifications- Notes: 2WD, 3/4 & 1 Ton
- Item Dimensions: 3.0 x 3.1 x 26.9 inches
- Item Weight: 10.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Shaft Unit-Steering Knuckle Lower Control Arm
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Knuckle Assembly Left
PartNumber: 15589435
Product Specifications- Notes: Pick-Up; 30 Series; Left Side
- Other Names: Knuckle
- Item Dimensions: 17.1 x 11.7 x 12.7 inches
- Item Weight: 24.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Knuckle Assembly Left
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Knuckle Assembly Right
PartNumber: 475084Product Specifications- Notes: 2WD, 3/4 & 1 Ton, W/Vacuum Brake
- Location: Passenger Side
- Other Names: Knuckle, Steering Knuckle
- Item Dimensions: 15.9 x 11.9 x 10.5 inches
- Item Weight: 28.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Knuckle Assembly Right
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
Centric® Premium™ King Pin Set for 1988 GMC V3500
PartNumber: 604.66026Product Specifications- Notes: Repair Kit
- UPC: 805890407515
- Part Description: 1988 GMC V3500 Premium™ King Pin Set
Vehicle Fitment- 1988 GMC V3500 | All Trims | All Engines
OEM (Genuine) 1988 GMC V3500 Arm Kit, Front Lower Control(RH)
PartNumber: 12548032
Product Specifications- Notes: 2WD, Hd Suspension
- Location: Passenger Side
- Item Dimensions: 21.4 x 16.6 x 6.9 inches
- Item Weight: 32.90 Pounds
- Replaced by: 15984948
- Part Description: 1988 GMC V3500 Arm Kit, Front Lower Control(RH)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Arm Kit, Front Lower Control(RH)
PartNumber: 12548032Product Specifications- Notes: 2WD, Hd Suspension
- Location: Passenger Side
- Item Dimensions: 21.4 x 16.6 x 6.9 inches
- Item Weight: 32.90 Pounds
- Replaced by: 15984948
- Part Description: 1988 GMC V3500 Arm Kit, Front Lower Control(RH)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
National® Steering Knuckle Seal for 1988 GMC V3500
PartNumber: 710385Product Specifications- Notes: w/Spicer 60-F Axle(s); w/9.75in Ring Gear
- Type: 273
- Part Description: 1988 GMC V3500 Steering Knuckle Seal
Vehicle Fitment- 1988 GMC V3500 | All Trims | All Engines
OEM (Genuine) 1988 GMC V3500 Arm Kit, Front Lower Control(LH)
PartNumber: 12548031Product Specifications- Notes: 2WD, Hd Suspension
- Location: Driver Side
- Item Dimensions: 22.9 x 17.5 x 4.1 inches
- Item Weight: 31.30 Pounds
- Replaced by: 15984947
- Part Description: 1988 GMC V3500 Arm Kit, Front Lower Control(LH)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Arm Kit, Front Lower Control(LH)
PartNumber: 12548031Product Specifications- Notes: 2WD, Hd Suspension
- Location: Driver Side
- Item Dimensions: 22.9 x 17.5 x 4.1 inches
- Item Weight: 31.30 Pounds
- Replaced by: 15984947
- Part Description: 1988 GMC V3500 Arm Kit, Front Lower Control(LH)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Knuckle Assembly Right
PartNumber: 363736Product Specifications- Notes: 2WD, 3/4 & 1 Ton, W/Hydraulic
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 17.0 x 12.9 x 11.6 inches
- Item Weight: 28.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Knuckle Assembly Right
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Knuckle kit
PartNumber: 15537219Product Specifications- Notes: 4WD One Ton, 1 Ton
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 17.0 x 11.2 x 7.8 inches
- Item Weight: 18.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Knuckle kit
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Knuckle Assembly Left
PartNumber: 363735Product Specifications- Notes: 2WD, 3/4 & 1 Ton, W/Hydraulic
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 17.1 x 12.6 x 11.7 inches
- Item Weight: 30.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Knuckle Assembly Left
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Front Lower Control Arm Kit (Lh)
PartNumber: 12548033
Product Specifications- Notes: 2WD, 3/4 & 1 Ton
- Location: Driver Side
- Other Names: Lower Control Arm
- Item Dimensions: 22.7 x 16.2 x 7.4 inches
- Item Weight: 33.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15984949
- Part Description: 1988 GMC V3500 Front Lower Control Arm Kit (Lh)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Front Lower Control Arm Kit (Lh)
PartNumber: 12548033Product Specifications- Notes: 2WD, 3/4 & 1 Ton
- Location: Driver Side
- Other Names: Lower Control Arm
- Item Dimensions: 22.7 x 16.2 x 7.4 inches
- Item Weight: 33.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15984949
- Part Description: 1988 GMC V3500 Front Lower Control Arm Kit (Lh)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Front Lower Control Arm Kit (Rh)
PartNumber: 12548034Product Specifications- Notes: 2WD, 3/4 & 1 Ton
- Location: Passenger Side
- Other Names: Lower Control Arm
- Item Dimensions: 21.6 x 16.6 x 8.2 inches
- Item Weight: 33.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15984950
- Part Description: 1988 GMC V3500 Front Lower Control Arm Kit (Rh)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Front Lower Control Arm Kit (Rh)
PartNumber: 12548034Product Specifications- Notes: 2WD, 3/4 & 1 Ton
- Location: Passenger Side
- Other Names: Lower Control Arm
- Item Dimensions: 21.6 x 16.6 x 8.2 inches
- Item Weight: 33.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15984950
- Part Description: 1988 GMC V3500 Front Lower Control Arm Kit (Rh)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Knuckle kit
PartNumber: 15537220Product Specifications- Notes: 4WD One Ton, 1 Ton
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 14.3 x 14.0 x 11.1 inches
- Item Weight: 20.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Knuckle kit
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Left Knuckle Unit
PartNumber: 14013071Product Specifications- Notes: 4WD 1/2 & 3/4 Ton, 1/2 & 3/4 Ton
- Location: Driver Side
- Other Names: Knuckle, Steering Knuckle
- Item Dimensions: 14.6 x 14.0 x 10.7 inches
- Item Weight: 21.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Left Knuckle Unit
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Right Knuckle Unit
PartNumber: 14013072Product Specifications- Notes: 4WD 1/2 & 3/4 Ton, 1/2 & 3/4 Ton
- Location: Passenger Side
- Other Names: Knuckle, Steering Knuckle
- Item Dimensions: 12.6 x 12.0 x 6.3 inches
- Item Weight: 12.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Right Knuckle Unit
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Front Upper Control Arm Kit
PartNumber: 12383506
Product Specifications- Notes: 2WD, 3/4 & 1 Ton
- Location: Passenger Side
- Other Names: Upper Control Arm
- Item Dimensions: 19.3 x 13.8 x 7.0 inches
- Item Weight: 10.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Front Upper Control Arm Kit
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Spindle Asm, Front Wheel
PartNumber: 464039Product Specifications- Notes: 4WD 1/2 & 3/4 Ton, 1/2 & 3/4 Ton
- Location: Driver Side; Passenger Side
- Other Names: Spindle
- Item Dimensions: 5.4 x 5.2 x 7.7 inches
- Item Weight: 5.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Spindle Asm, Front Wheel
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Front Upper Control Arm Kit
PartNumber: 12383505
Product Specifications- Notes: 2WD, 3/4 & 1 Ton
- Location: Driver Side
- Other Names: Upper Control Arm
- Item Dimensions: 13.3 x 11.0 x 5.1 inches
- Item Weight: 12.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15665561, 14026579
- Part Description: 1988 GMC V3500 Front Upper Control Arm Kit
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Shaft Unit - Steering Knuckle Lower Control Arm - LH
PartNumber: 338235
Product Specifications- Notes: 2WD, Hd Suspension
- Location: Passenger Side
- Item Dimensions: 19.6 x 5.0 x 5.0 inches
- Item Weight: 8.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Shaft Unit - Steering Knuckle Lower Control Arm - LH
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Shaft Unit - Steering Knuckle Lower Control Arm - RH
PartNumber: 338236Product Specifications- Notes: 2WD, Hd Suspension
- Location: Driver Side
- Item Dimensions: 22.1 x 6.2 x 4.3 inches
- Item Weight: 9.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Shaft Unit - Steering Knuckle Lower Control Arm - RH
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Front Upper Control Arm Kit (Lh)
PartNumber: 12383507Product Specifications- Notes: 2WD, Hd
- Location: Driver Side
- Other Names: Upper Control Arm
- Item Dimensions: 13.1 x 11.1 x 5.2 inches
- Item Weight: 11.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Front Upper Control Arm Kit (Lh)
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Steering Knuckle Assembly Left
PartNumber: 475083Product Specifications- Notes: 2WD, 3/4 & 1 Ton, W/Vacuum Brake
- Location: Driver Side
- Other Names: Knuckle, Steering Knuckle
- Item Dimensions: 15.2 x 11.8 x 10.5 inches
- Item Weight: 26.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Steering Knuckle Assembly Left
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1988 GMC V3500 Shaft, Front Upper Control Arm Pivot
PartNumber: 3846351
Product Specifications- Notes: 2WD, 3/4 & 1ton
- Item Dimensions: 17.8 x 4.7 x 4.6 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 GMC V3500 Shaft, Front Upper Control Arm Pivot
Vehicle Fitment- 1988 GMC V3500 | Base, High Sierra, Sierra Classic, SLE | 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
1-30 of 48 Results
< Previous
12
Next >