< Back ×
My Vehicle Change Vehicle
1988 Dodge W350
Dorman® OE Solutions Rear Differential Ring And Pinion for 1988 Dodge W350
PartNumber: 697-337Product Specifications- Notes: 9.25" Ring Gear; w/3.90 Axle Ratio
- Gear Ratio: 3.90
- Item Grade: Standard Replacement
- UPC: 019495515708
- Part Description: OE Solutions Rear Differential Ring And Pinion
$250.76
Anchor® Driveshaft Center Support Bearing for 1988 Dodge W350
PartNumber: 6079Product Specifications- Notes: BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: SQUARE FRAME;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- OE Part Number: 5014097AA
- Shape: Square
- UPC: 081106060792
- Part Description: Driveshaft Center Support Bearing
$25.14
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1988 Dodge W350
PartNumber: 65-9319Product Specifications- Notes: with Dana Model 44 Axle;with 4500 lb Front Axle;with 29" (736 mm) Long Driveshaft;Full Time 4WD;Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 29"
- Length (mm): 736
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Remanufactured Driveshaft/ Prop Shaft
$263.27
SKF® Rear Master Differential Rebuild Kit With Bolts for 1988 Dodge W350
PartNumber: SDK304-MKProduct Specifications- Notes: Master Kit; 9.25" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311471404
- Width: 2.50"
- Part Description: Rear Master Differential Rebuild Kit With Bolts
$161.46
Dorman® OE Solutions Rear Differential Ring And Pinion for 1988 Dodge W350
PartNumber: 697-308Product Specifications- Notes: 9.25" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- UPC: 019495105473
- Part Description: OE Solutions Rear Differential Ring And Pinion
$233.32
Anchor® Driveshaft Center Support Bearing for 1988 Dodge W350
PartNumber: 6038Product Specifications- Notes: COMPAT w/SPICER SERIES: 1480, 1550; BEARING ID / BORE: 1.5750 INCH / 40 MM;CENTERLINE: 2.48 INCH / 63 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;NOT PICTURED: TWO DUST SHIELDS;
- Centerline Length: 2.48"
- Inside Diameter: 1.575"
- Mount Width: 6.62"
- Shape: Round
- UPC: 081106060389
- Part Description: Driveshaft Center Support Bearing
$11.77
SKF® Rear Differential Rebuild Kit for 1988 Dodge W350
PartNumber: SDK304Product Specifications- Notes: Std Kit; 9.25" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470469
- Width: 2.50"
- Part Description: Rear Differential Rebuild Kit
$135.40
Dorman® Oe Solutions Rear Standard Rotation Differential Ring And Pinion for 1988 Dodge W350
PartNumber: 697-324Product Specifications- Notes: w/3.54 Axle Ratio; Dana 60 Axle; Std Rotation;w/3.54 Axle Ratio; Dana 60 Axle
- Gear Ratio: 3.54
- Item Grade: Standard Replacement
- OE Part Number: 4762222
- UPC: 019495105633
- Part Description: Oe Solutions Rear Standard Rotation Differential Ring And Pinion
$222.64
SKF® Driveshaft End Yoke for 1988 Dodge W350
PartNumber: UJ646Product Specifications- Notes: w/Rr. Shaft Outer Lock Rings & 1.375" Dia Whl. Joint Brg. Caps:;w/Rr. Shaft Inner Lock Rings, 2.125" Rr. Yokes & 1.375" Dia Whl. Joint Brg. Caps:;w/Rr. Shaft Inner Lock Rings, 3" Rr. Yokes & 1.188" Dia Whl. Joint Brg. Caps:;w/Rr. Shaft Outer Lock Rings & 1.188" Dia Whl. Joint Brg. Caps:;w/Rr. Shaft Inner Lock Rings, 2.125" Rr. Yokes & 1.188" Dia Whl. Joint Brg. Caps:;w/Rr. Shaft Inner Lock Rings, 3" Rr. Yokes & 1.375" Dia Whl. Joint Brg. Caps:
- UPC: 085311556149
- Width: 0.6860"
- Part Description: Driveshaft End Yoke
$66.80
Anchor® Driveshaft Center Support Bearing for 1988 Dodge W350
PartNumber: 6056Product Specifications- Notes: COMPAT w/SPICER SERIES: 1260, 1410; BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;COMPLETE MOUNT;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- Shape: Round
- UPC: 081106060563
- Part Description: Driveshaft Center Support Bearing
$10.02
Victor Reinz® Axle Housing Cover Gasket for 1988 Dodge W350
PartNumber: 71-14836-00Product Specifications- Notes: 12 Bolt;with 9.250in Ring Gear;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 12
- Thickness (in): 0.030"
- UPC: 023913682705
- Part Description: Axle Housing Cover Gasket
$8.38
Dorman® OE Solution Rear Ring And Pinion Bearing Installation Kit for 1988 Dodge W350
PartNumber: 697-106Product Specifications- Notes: Std Design; Dana 60 Axle
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495105169
- Part Description: OE Solution Rear Ring And Pinion Bearing Installation Kit
$216.47
Westar® Driveshaft Center Support for 1988 Dodge W350
PartNumber: DS-6038Product Specifications- Notes: Spicer 1480, 1550; Bearings ID = 1.5748 - 1.5743"
- UPC: 656591060383
- Part Description: Driveshaft Center Support
$14.31
Dorman® Oe Solution Differential Disc Kit Rear Differential for 1988 Dodge W350
PartNumber: 697-782Product Specifications- Notes: w/Limited Slip Differential; w/Chrysler 9.25 Rear Axle
- Inside Diameter: 2.04"; 2.13"
- OE Part Number: 5252506
- Outside Diameter: 3.35"
- Package Contents: 1 Differential Clutch Kit
- Shim Material: Steel
- UPC: 037495175555
- Part Description: Oe Solution Differential Disc Kit Rear Differential
$150.87
Victor Reinz® Axle Housing Cover Gasket for 1988 Dodge W350
PartNumber: 71-14804-00Product Specifications- Notes: with 10.540in Ring Gear;10 Bolt;Rear; Spicer 70U;Rear; Spicer 71
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 10
- Thickness (in): 0.031"
- UPC: 023913682514
- Part Description: Axle Housing Cover Gasket
$16.12
SKF® Driveshaft Center Support Bearing for 1988 Dodge W350
PartNumber: HB88528Product Specifications- Notes: 1.378" I.D.
- Bolt Hole Center: 6.629"
- Inside Diameter: 1.378"
- Outside Diameter: 4.980"
- UPC: 085311493598
- Width: 1.941"
- Part Description: Driveshaft Center Support Bearing
$61.72
National® Front Inner Differential Bearing for 1988 Dodge W350
PartNumber: HM803146Product Specifications- Notes: w/Spicer 60 Axle; w/9.75in Ring Gear;w/Spicer 60-HD Axle; w/9.75in Ring Gear;w/Spicer 60-F Axle; w/9.75in Ring Gear
- Part Description: Front Inner Differential Bearing
$34.55
SKF® Rear Inner Axle Shaft Bearing Kit for 1988 Dodge W350
PartNumber: SET416Product Specifications- Notes: Spicer 60 & 70 Axles w/ 12" X 3" Brks. w/o 9,000 lb GVW
- Cone ID: 2.25"
- Cone Length: 1.219"
- Cone Radius: 0.25"
- Cup Length: 0.937"
- Cup Radius: 0.13"
- Outside Diameter: 4.125"
- UPC: 085311398541
- Width: 1.187"
- Part Description: Rear Inner Axle Shaft Bearing Kit
$47.43
Dorman® OE Solutions 4Wd Axle Actuator Housing for 1988 Dodge W350
PartNumber: 917-500Product Specifications- Notes: 4WD Vac Motor Cover
- Bolt Hole Quantity: 4
- Gasket or Seal Included: Yes
- Housing Material: Metal
- Installation Hardware Included: Yes
- OE Part Number: 4384169, 83500195
- Package Contents: Product
- UPC: 019495234173
- Part Description: OE Solutions 4Wd Axle Actuator Housing
$26.70
Westar® Driveshaft Center Support for 1988 Dodge W350
PartNumber: DS-6056Product Specifications- Notes: Spicer 1260, 1410; Bearings ID = 1.3780 - 1.3775"
- UPC: 656591060567
- Part Description: Driveshaft Center Support
$12.36
National® Driveshaft Center Support Bearing for 1988 Dodge W350
PartNumber: HB-88108-DProduct Specifications- Notes: Incls Bearing & Support; w/1.5748in Bearing ID; w/40mm Bearing ID; Center To Center 3.248in; Center To Center 82.5mm
- Bolt Holes (Inch): 6.6000
- Centerline Height: 3.248"
- Inside Diameter: 1.575"
- Slinger (1): 230141
- Slinger (2): 230104
- Type: 2
- Part Description: Driveshaft Center Support Bearing
$62.69
GMB® Grade Standard U-Joint for 1988 Dodge W350
PartNumber: 210-0332Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 1.375" Bearing Cap Dia; 4500lb Front Axle
- Dimension: 1.375" Cap Diameter
- Greasable: Yes
- Height (Inch): 2.30
- Length (Inch): 4.0
- Lube Fitting Location: Grease Fitting in Cross
- UPC: 083286128200
- Weight (Gross Pounds): 2.30
- Width (Inch): 4.0
- Part Description: Grade Standard U-Joint
$27.32
SKF® Driveshaft Center Support Bearing for 1988 Dodge W350
PartNumber: HB88107-BProduct Specifications- Notes: Bearing & Support
- Bolt Hole Center: 6.625"
- Inside Diameter: 1.378"
- OE Part Number: 4411972, 3632990, 9759HB88107B, F81Z4800BA
- Outside Diameter: 4.084"
- Slinger: No
- UPC: 085311174558
- Width: 0.984"
- Part Description: Driveshaft Center Support Bearing
$42.79
National® Rear Inner Differential Pinion Bearing for 1988 Dodge W350
PartNumber: HM803149Product Specifications- Notes: w/Spicer 71 Axle; w/10.54in Ring Gear;w/Spicer 70U Axle; w/10.54in Ring Gear
- UPC: 724956005932
- Part Description: Rear Inner Differential Pinion Bearing
$30.35
FAG® Rear Axle Shaft Bearing for 1988 Dodge W350
PartNumber: FC67148.5Product Specifications- Notes: w/o HD Axle; 9.25" Ring Gear; FAG Global# FC67148.5; .830" Wide Brg.;9.25" ring gear; w/o HD Axle; FAG Global# FC67148.5; .830" Wide Brg.;Light-duty Axle; 9.25" Ring Gear; FAG Global# FC67148.5; .830" Wide Brg.
- UPC: 670774196836
- Part Description: Rear Axle Shaft Bearing
$6.31
National® Rear Axle Shaft Bearing for 1988 Dodge W350
PartNumber: RP-6408Product Specifications- Notes: Axle Repair Bearing; with 9.25in Ring Gear; Except Heavy Duty Axle;Axle Repair Bearing
- Part Description: Rear Axle Shaft Bearing
$31.94
GMB® Grade Performance™ Rear U-Joint for 1988 Dodge W350
PartNumber: 215-1306Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; 1.078" Bearing Cap Dia;Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.078"
- Lock Ring Type: Internal
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286513068
- Part Description: Grade Performance™ Rear U-Joint
$13.30
National® Front Outer Differential Pinion Bearing for 1988 Dodge W350
PartNumber: HM88542Product Specifications- Notes: w/Spicer 60-F Axle; w/9.75in Ring Gear;w/Spicer 71 Axle; w/10.54in Ring Gear;w/Spicer 60-HD Axle; w/9.75in Ring Gear;w/Spicer 70U Axle; w/10.54in Ring Gear
- Part Description: Front Outer Differential Pinion Bearing
$20.92
GMB® Grade Performance™ Rear U-Joint for 1988 Dodge W350
PartNumber: 215-1307Product Specifications- Notes: Perf Grade; Grease Fitting in Bearing Cap;Perf Grade; Grease Fitting in Bearing Cap; 1.078" Bearing Cap Dia
- Bearing Cap Diameter Axis 1 (in): 1.0800
- Bearing Cap Diameter Axis 2 (in): 1.0800
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style
- UPC: 083286513075
- Part Description: Grade Performance™ Rear U-Joint
$13.31
SKF® Rear Axle Shaft Bearing Kit for 1988 Dodge W350
PartNumber: SET75Product Specifications- Notes: w/o 9.25" Ring Gear;Dana 60 Axle;Spicer 60, 70 & 71 Axles
- Cone ID: 2.25"
- Outside Diameter: 3.813"
- UPC: 085311461849
- Width: 0.201"
- Part Description: Rear Axle Shaft Bearing Kit
$27.69
1-30 of 172 Results
< Previous
12345
Next >