< Back ×
My Vehicle Change Vehicle
1988 Dodge Dynasty
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 1988 Dodge Dynasty
PartNumber: 20-7833Product Specifications- Notes: without Aftermarket Filtration Improvement;In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 1988 Dodge Dynasty Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
$44.71
National® Power Steering Pump Shaft Bearing for 1988 Dodge Dynasty
PartNumber: 203-FFProduct Specifications- Notes: w/Chrysler Alternator; w/40,50,90,120 Amp Alternator;Two Seal Design; w/Bosch Alternator; w/40, 90 Amp Alternator; ID# (s) 5233574
- Bore: 0.669"
- Inner Race Bore: 0.669"
- Inner Race Outside Diameter: 5.512"
- Inner Race Radius: 0.024"
- Inner Race Width: 0.472"
- Outer Race Outside Diameter: 1.575"
- Outer Race Radius: 0.024"
- Outer Race Width: 0.472"
- Outside Diameter: 1.575"
- Width Belt: 0.472"
- Part Description: 1988 Dodge Dynasty Power Steering Pump Shaft Bearing
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
$7.88
Cardone Reman® Power Steering Filter for 1988 Dodge Dynasty
PartNumber: 20-0012FProduct Specifications- Notes: Our Magnetic In-Line Filter measures 2 1/4" X 5" w/12 mm Outer Dia Neck (Designed For Use w/1/2" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 1/2"
- Housing Material: Aluminum
- Inlet Diameter: 0.527"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.527"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617974172
- Part Description: 1988 Dodge Dynasty Power Steering Filter
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1988 Dodge Dynasty
PartNumber: 20-0038FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Aluminum Housing
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.395"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.397"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617953122
- Part Description: 1988 Dodge Dynasty Power Steering Filter
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
$20.45Cardone Reman® Power Steering Filter for 1988 Dodge Dynasty
PartNumber: 20-0058FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/5/8" Outer Dia Neck (For 5/8" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 5/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.651"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.654"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 884548041394
- Part Description: 1988 Dodge Dynasty Power Steering Filter
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1988 Dodge Dynasty
PartNumber: 20-P038FProduct Specifications- Notes: with Plastic Housing;Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Plastic
- Inlet Diameter: 0.406"
- Installation Hardware Included: Hose Clamps (2), O-Ring
- Outlet Diameter: 0.415"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps, O-Ring
- Product Condition: New
- UPC: 884548053915
- Part Description: 1988 Dodge Dynasty Power Steering Filter
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
$15.50
SKF® Power Steering Pump Shaft Seal for 1988 Dodge Dynasty
PartNumber: 7475Product Specifications- Attribute: CRWA1
- Bore: 1.312"
- Metal: cased with sealant coating on the outside diameter
- Nitrile rubber: NBR
- Outlet Diameter: 1.316"
- Shaft: 0.75"
- UPC: 085311005708
- Width: 0.25"
- Part Description: 1988 Dodge Dynasty Power Steering Pump Shaft Seal
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
$10.86
Gates® Power Steering Pump Seal Kit for 1988 Dodge Dynasty
PartNumber: 351160Product Specifications- UPC: 072053419894
- Part Description: 1988 Dodge Dynasty Power Steering Pump Seal Kit
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | 4 Cyl 2.5L
- 1988 Dodge Dynasty | All Trims | 6 Cyl 3.0L
Gates® Power Steering Pump Shaft Seal for 1988 Dodge Dynasty
PartNumber: 348720Product Specifications- UPC: 072053417906
- Part Description: 1988 Dodge Dynasty Power Steering Pump Shaft Seal
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | 4 Cyl 2.5L
- 1988 Dodge Dynasty | All Trims | 6 Cyl 3.0L
OEM (Genuine) 1988 Dodge Dynasty Boot Kit Hydraulic Steering Gear Rac
PartNumber: 4147303
Product Specifications- Notes: All Models
- Location: Driver Side; Passenger Side
- Other Names: Boot, Boot Kit, Tie Rod Boot
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dynasty Boot Kit Hydraulic Steering Gear Rac
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
OEM (Genuine) 1988 Dodge Dynasty Seal-Power Steering Pump Shaft
PartNumber: 4333377ABProduct Specifications- Notes: All Models
- Other Names: Power Steering Pump Seal Kit
- Item Dimensions: 6.3 x 5.6 x 1.2 inches
- Item Weight: 0.40 Pounds
- Replaces: 4333377
- Part Description: 1988 Dodge Dynasty Seal-Power Steering Pump Shaft
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
OEM (Genuine) 1988 Dodge Dynasty Seal-Power Steering Pump Shaft
PartNumber: 4333377ABProduct Specifications- Notes: All Models
- Other Names: Power Steering Pump Seal Kit
- Item Dimensions: 6.3 x 5.6 x 1.2 inches
- Item Weight: 0.40 Pounds
- Replaces: 4333377
- Part Description: 1988 Dodge Dynasty Seal-Power Steering Pump Shaft
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
MAVAL® Power Steering Pump for 1988 Dodge Dynasty
PartNumber: 9726MProduct Specifications- Notes: Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 843613104730
- Part Description: 1988 Dodge Dynasty Power Steering Pump
Vehicle Fitment- 1988 Dodge Dynasty | All Trims | All Engines
OEM (Genuine) 1988 Dodge Dynasty Power Steering Pump
PartNumber: 4470314Product Specifications- Notes: 2.5 & 3.0 Liter;All Models; 2.5 & 3.0 Liter
- Other Names: Pump
- Item Weight: 9.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dynasty Power Steering Pump
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1988 Dodge Dynasty Reservoir Power Steering Pump
PartNumber: 3643453Product Specifications- Notes: 2.5 & 3.0 Liter
- Other Names: Power Steering Pump, Reservoir, Reservoir Tank
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dynasty Reservoir Power Steering Pump
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1988 Dodge Dynasty Reservoir Power Steering Pump
PartNumber: 3643453Product Specifications- Notes: 2.5 & 3.0 Liter
- Other Names: Power Steering Pump, Reservoir, Reservoir Tank
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dynasty Reservoir Power Steering Pump
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1988 Dodge Dynasty Power Steering Rebuild Kit
PartNumber: 3815878Product Specifications- Notes: Rack Seal Kit; All Models
- Part Description: 1988 Dodge Dynasty Power Steering Rebuild Kit
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1988 Dodge Dynasty Power Steering Rebuild Kit
PartNumber: 4147421Product Specifications- Notes: Rack & Pinion Seal Kit; All Models
- Part Description: 1988 Dodge Dynasty Power Steering Rebuild Kit
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1988 Dodge Dynasty PULLEY-5V RIBBED Power Steering Pump
PartNumber: 4483446Product Specifications- Notes: 2.5 & 3.0 Liter
- Other Names: Pulley
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dynasty PULLEY-5V RIBBED Power Steering Pump
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1988 Dodge Dynasty PULLEY-5V RIBBED Power Steering Pump
PartNumber: 4483446Product Specifications- Notes: 2.5 & 3.0 Liter
- Other Names: Pulley
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dynasty PULLEY-5V RIBBED Power Steering Pump
Vehicle Fitment- 1988 Dodge Dynasty | Base, LE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS