44 products about 1988 Dodge Dakota Ignition, Distributors & ECM found
Product Specifications- Notes: Chrome
- Finish: Silver
- Housing Material: Metal
- Installation Hardware Included: No
- Key Programmable: No
- Key Quantity: 2
- Lock Material: Metal
- Mounting Hardware Included: No
- UPC: 885484688933
- Wiring Harness Included: No Harness Required
- Part Description: 1988 Dodge Dakota Ignition Lock Cylinder
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | All Engines
Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;with OE # 4379581, 4379634
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 14, 60
- Part Description: 1988 Dodge Dakota Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Round
- Length: 46.34 mm
- Mounting Hardware Included: No
- Terminal Gender: Male
- Terminal Quantity: 1
- Terminal Type: Threaded
- Threaded End Diameter: 9.5 mm
- UPC: 724620074493
- Wiring Harness Included: No
- Part Description: 1988 Dodge Dakota Ignition Knock Sensor
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: with OE # 4379528, 4379638;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 14, 60
- Part Description: 1988 Dodge Dakota Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Connector Gender: Female
- Ignition Type: Standard
- Mounting Bracket Included: No
- Oil Filled: Yes
- Requires External Resistor: Yes
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Threaded
- UPC: 724620078163
- Voltage: 12 Volts
- Part Description: 1988 Dodge Dakota Ignition Coil
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- UPC: 724620114700
- Part Description: 1988 Dodge Dakota Ignition Distributor Cap
Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
Product Specifications- UPC: 724620097607
- Part Description: 1988 Dodge Dakota Ignition Distributor Rotor
Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: with OE # 4379585;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 14, 60
- Part Description: 1988 Dodge Dakota Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- UPC: 724620097614
- Part Description: 1988 Dodge Dakota Ignition Distributor Rotor
Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: with OE # 4379 532;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 14, 60
- Part Description: 1988 Dodge Dakota Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: Electronic Distributor;with Dual Wires from Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Hall Effect
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1988 Dodge Dakota Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: Electronic Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 6
- Distributor Cap: No
- Distributor Type: Magnetic Coil
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1988 Dodge Dakota Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: with Single Wire from Distributor;Electronic Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Hall Effect
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1988 Dodge Dakota Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
Product Specifications- UPC: 724620097997
- Part Description: 1988 Dodge Dakota Ignition Distributor Cap
Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: with OE # 4379658, 4443973;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 14, 60
- Part Description: 1988 Dodge Dakota Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: 1987-90, W/Tilt Wheel
- Other Names: Cylinder & Keys, Ignition Switch
- Item Dimensions: 10.9 x 6.4 x 5.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Ignition & Starter
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
Product Specifications- Notes: 1987-90, W/Tilt Wheel
- Other Names: Cylinder & Keys, Ignition Switch
- Item Dimensions: 10.9 x 6.4 x 5.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Ignition & Starter
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
Product Specifications- Contents: Distributor Rotor
- UPC: 841266019944
- Part Description: 1988 Dodge Dakota Ignition Distributor Rotor
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: 1987-90, W/Tilt Wheel; All; W/Tilt Wheel
- Other Names: Cylinder & Keys, Lock Cylinder
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Cylinder Pkg-Ign Lk Cylinder & Keys T(Ser
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
Product Specifications- Notes: w/Single Wire From Dist; Supplied w/Cap & Rotor
- UPC: 627785017568
- Part Description: 1988 Dodge Dakota Distributor
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: 2.2l;3.9l;4 Cylinder;6 Cylinder
- Other Names: Coil, Ignition Coil
- Item Dimensions: 9.7 x 5.1 x 3.3 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Ignition Coil Replacement
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
Product Specifications- Contents: Distributor Rotor
- UPC: 841266020964
- Part Description: 1988 Dodge Dakota Ignition Distributor Rotor
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
Product Specifications- Coil Wire: 20"
- Core Construction: Suppression Core
- Distributor Cap Included: Yes
- Grease Pack: No
- Insulation: EPDM
- Jacket: Blended Silicone
- Spark Plug Wire Lead 1: 22"
- Spark Plug Wire Lead 2: 23"
- Spark Plug Wire Lead 3: 27"
- Spark Plug Wire Lead 4: 29"
- Total Number of Leads: 6
- UPC: 841266018299
- Wire Diameter (mm): 7 mm
- Part Description: 1988 Dodge Dakota Ignition Distributor Cap
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: 1987-90, W/O Tilt Wheel; All; W/O Tilt Wheel
- Other Names: Cylinder & Keys, Lock Cylinder
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Cylinder Pkg
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
Product Specifications- Notes: 3.9l
- Other Names: Pick-Up, Pick-Up Coil, Pick-Up Pole Piece
- Item Dimensions: 4.0 x 3.8 x 2.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Pick-Up and Plate, Single Pick-Up, (Use Retainer 5226699) (318-360 Eng.)
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
Product Specifications- Contents: Distributer Cap
- Distributor Vent: Yes
- UPC: 841266026713
- Part Description: 1988 Dodge Dakota Ignition Distributor Cap
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 4 Cyl 2.2L
Product Specifications- Attachment Method: Bolt-On
- Color: Blue
- Connector Gender: Female (1)
- Connector Quantity: 1
- Mounting Bracket Included: No
- Mounting Location: External
- Oil Filled: Yes
- Terminal Gender: Male (1)
- Terminal Quantity: 2
- Terminal Type: Stud
- UPC: 841266012297
- Voltage: 12 Volts
- Part Description: 1988 Dodge Dakota Ignition Coil
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | All Engines
Product Specifications- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Round
- Terminal Gender: Male
- Terminal Quantity: 3
- UPC: 841266015083
- Part Description: 1988 Dodge Dakota Ignition Distributor Pickup Coil
More Info Vehicle Fitment- 1988 Dodge Dakota | All Trims | 6 Cyl 3.9L
Product Specifications- Notes: 1987-90, W/O Tilt Wheel
- Other Names: Cylinder & Keys, Ignition Switch
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Switch-Ign & Starter
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
Product Specifications- Notes: 1987-90, W/O Tilt Wheel
- Other Names: Cylinder & Keys, Ignition Switch
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Dodge Dakota Switch-Ign & Starter
More Info Vehicle Fitment- 1988 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS