< Back ×
My Vehicle Change Vehicle
1988 Chevrolet Beretta
OEM (Genuine) 1988 Chevrolet Beretta Power Steering Pump
PartNumber: 26002918
Product Specifications- Notes: Beretta, Corsica; To Vin 500000; 2.8l; W/O Heavy Duty
- Other Names: Power Steering Pump
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Power Steering Pump
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT | 6 Cyl 2.8 L GAS
$145.11 MSRP:$208.54You Save: $63.43 (31%)
National® Power Steering Pump Shaft Bearing for 1988 Chevrolet Beretta
PartNumber: 203-FFProduct Specifications- Notes: Two Seal Design; w/AC-Delco Alternator
- Bore: 0.669"
- Inner Race Bore: 0.669"
- Inner Race Outside Diameter: 5.512"
- Inner Race Radius: 0.024"
- Inner Race Width: 0.472"
- Outer Race Outside Diameter: 1.575"
- Outer Race Radius: 0.024"
- Outer Race Width: 0.472"
- Outside Diameter: 1.575"
- Width Belt: 0.472"
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Shaft Bearing
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | All Engines
$7.88OEM (Genuine) 1988 Chevrolet Beretta Pump Asm-P/S
PartNumber: 26031761
Product Specifications- Notes: 1987-89, 2.8, 3.1 Liter, From Vin 500001
- Other Names: Power Steering Pump
- Item Dimensions: 9.4 x 6.9 x 6.8 inches
- Item Weight: 6.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Pump Asm-P/S
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT, GTZ, Indianapolis 500 Pace Car | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
$229.73 MSRP:$459.32You Save: $229.59 (50%)
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 1988 Chevrolet Beretta
PartNumber: 20-30900Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;From VIN # 500001;without Aftermarket Filtration Improvement;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 1988 Chevrolet Beretta Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
$57.17OEM (Genuine) 1988 Chevrolet Beretta Power Steering Pump
PartNumber: 26004060
Product Specifications- Notes: Beretta, Corsica; From Vin 500001; 2.0l
- Other Names: Power Steering Pump
- Part Description: 1988 Chevrolet Beretta Power Steering Pump
Vehicle Fitment- 1988 Chevrolet Beretta | Base, Indianapolis 500 Pace Car | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
$138.82 MSRP:$199.51You Save: $60.69 (31%)
Cardone Reman® Power Steering Filter for 1988 Chevrolet Beretta
PartNumber: 20-0012FProduct Specifications- Notes: Our Magnetic In-Line Filter measures 2 1/4" X 5" w/12 mm Outer Dia Neck (Designed For Use w/1/2" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 1/2"
- Housing Material: Aluminum
- Inlet Diameter: 0.527"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.527"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617974172
- Part Description: 1988 Chevrolet Beretta Power Steering Filter
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | All Engines
$20.05
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 1988 Chevrolet Beretta
PartNumber: 20-14878Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;without Aftermarket Filtration Improvement;To VIN # 500000;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 1988 Chevrolet Beretta Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
$47.55OEM (Genuine) 1988 Chevrolet Beretta Power Steering Pump
PartNumber: 26044959Product Specifications- Notes: 1987-89, 2.0 Liter, From Vin 500001
- Other Names: Power Steering Pump
- Item Dimensions: 7.2 x 7.2 x 11.6 inches
- Item Weight: 6.50 Pounds
- Replaces: 26031758
- Part Description: 1988 Chevrolet Beretta Power Steering Pump
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT, Indianapolis 500 Pace Car | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
$233.59 MSRP:$386.63You Save: $153.04 (40%)Cardone Reman® Power Steering Filter for 1988 Chevrolet Beretta
PartNumber: 20-0038FProduct Specifications- Notes: with Aluminum Housing;Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.395"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.397"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617953122
- Part Description: 1988 Chevrolet Beretta Power Steering Filter
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | All Engines
$20.45Cardone Reman® Power Steering Filter for 1988 Chevrolet Beretta
PartNumber: 20-0058FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/5/8" Outer Dia Neck (For 5/8" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 5/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.651"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.654"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 884548041394
- Part Description: 1988 Chevrolet Beretta Power Steering Filter
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | All Engines
$20.05OEM (Genuine) 1988 Chevrolet Beretta Power Steering Pump Seal Kit
PartNumber: 7840566Product Specifications- Notes: Beretta, Corsica; To Vin 500000
- Other Names: Power Steering Pump Seal Kit
- Item Dimensions: 6.1 x 3.1 x 0.2 inches
- Item Weight: 0.40 Pounds
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Seal Kit
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
$14.76 MSRP:$22.25You Save: $7.49 (34%)OEM (Genuine) 1988 Chevrolet Beretta Power Steering Pump Seal Kit
PartNumber: 7840566Product Specifications- Notes: Beretta, Corsica; To Vin 500000
- Other Names: Power Steering Pump Seal Kit
- Item Dimensions: 6.1 x 3.1 x 0.2 inches
- Item Weight: 0.40 Pounds
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Seal Kit
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
$14.76 MSRP:$22.25You Save: $7.49 (34%)Cardone Reman® Power Steering Filter for 1988 Chevrolet Beretta
PartNumber: 20-P038FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Plastic Housing
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Plastic
- Inlet Diameter: 0.406"
- Installation Hardware Included: Hose Clamps (2), O-Ring
- Outlet Diameter: 0.415"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps, O-Ring
- Product Condition: New
- UPC: 884548053915
- Part Description: 1988 Chevrolet Beretta Power Steering Filter
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | All Engines
$15.50
SKF® Power Steering Pump Shaft Seal for 1988 Chevrolet Beretta
PartNumber: 7475Product Specifications- Notes: 2nd Design
- Attribute: CRWA1
- Bore: 1.312"
- Metal: cased with sealant coating on the outside diameter
- Nitrile rubber: NBR
- Outlet Diameter: 1.316"
- Shaft: 0.75"
- UPC: 085311005708
- Width: 0.25"
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Shaft Seal
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | All Engines
$10.86
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 1988 Chevrolet Beretta
PartNumber: 20-878Product Specifications- Notes: To VIN # 500000;In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 1988 Chevrolet Beretta Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
$44.60
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 1988 Chevrolet Beretta
PartNumber: 20-900Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;From VIN # 500001;In-Line filter available;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 1988 Chevrolet Beretta Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
$44.73
Gates® Power Steering Pump Seal Kit for 1988 Chevrolet Beretta
PartNumber: 351780Product Specifications- Notes: w/16mm Shaft; 1st Design
- UPC: 072053420463
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Seal Kit
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
Gates® Power Steering Pump Seal Kit for 1988 Chevrolet Beretta
PartNumber: 350850Product Specifications- Notes: w/19mm Shaft; 2nd Design
- UPC: 072053419627
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Seal Kit
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
Gates® Power Steering Pump Shaft Seal for 1988 Chevrolet Beretta
PartNumber: 348720Product Specifications- Notes: w/19mm Shaft; 2nd Design
- UPC: 072053417906
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Shaft Seal
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
OEM (Genuine) 1988 Chevrolet Beretta Seal Kit-Valve Ring (Split Ring)
PartNumber: 26010340Product Specifications- Notes: Valve Ring; Beretta, Corsica
- Other Names: Seal Kit, Steering Gear Seal Kit
- Item Dimensions: 7.4 x 7.2 x 11.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Seal Kit-Valve Ring (Split Ring)
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT, GTZ, Indianapolis 500 Pace Car | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
Gates® Power Steering Pump Shaft Seal for 1988 Chevrolet Beretta
PartNumber: 348750Product Specifications- Notes: w/16mm Shaft; 1st Design
- UPC: 072053417937
- Part Description: 1988 Chevrolet Beretta Power Steering Pump Shaft Seal
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
MAVAL® Remanufactured Power Steering Pump for 1988 Chevrolet Beretta
PartNumber: 9738MProduct Specifications- Notes: ( w/o Sport Sus); Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 884109784043
- Part Description: 1988 Chevrolet Beretta Remanufactured Power Steering Pump
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 4 Cyl 2.0L
- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
MAVAL® Remanufactured Power Steering Pump for 1988 Chevrolet Beretta
PartNumber: 9741MProduct Specifications- Notes: ( w/Sport Susp); Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 843613104884
- Part Description: 1988 Chevrolet Beretta Remanufactured Power Steering Pump
Vehicle Fitment- 1988 Chevrolet Beretta | All Trims | 6 Cyl 2.8L
OEM (Genuine) 1988 Chevrolet Beretta Pump Asm-P/S
PartNumber: 26002917
Product Specifications- Notes: Beretta, Corsica; To Vin 500000; 2.0l; W/Heavy Duty
- Other Names: Power Steering Pump
- Item Weight: 6.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Pump Asm-P/S
Vehicle Fitment- 1988 Chevrolet Beretta | Base | 4 Cyl 2.0 L GAS
OEM (Genuine) 1988 Chevrolet Beretta Reservoir Kit-P.S. Pump
PartNumber: 26004512Product Specifications- Notes: 1987-89, 2.0 Liter, From Vin 500001
- Other Names: Reservoir
- Item Dimensions: 5.3 x 5.2 x 7.8 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Reservoir Kit-P.S. Pump
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT, Indianapolis 500 Pace Car | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
OEM (Genuine) 1988 Chevrolet Beretta Pump Asm, P/S
PartNumber: 26002916Product Specifications- Notes: Beretta, Corsica; To Vin 500000; 2.0l; W/O Heavy Duty
- Other Names: Power Steering Pump
- Item Weight: 6.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Pump Asm, P/S
Vehicle Fitment- 1988 Chevrolet Beretta | Base | 4 Cyl 2.0 L GAS
OEM (Genuine) 1988 Chevrolet Beretta Reservoir Kit, P.S. Pump
PartNumber: 26016820Product Specifications- Notes: 1987-89, 2.8, 3.1 Liter, From Vin 500001
- Other Names: Reservoir
- Item Dimensions: 7.0 x 7.0 x 4.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Reservoir Kit, P.S. Pump
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT, GTZ, Indianapolis 500 Pace Car | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
OEM (Genuine) 1988 Chevrolet Beretta Pulley Asm-P/S Pump
PartNumber: 10068511Product Specifications- Notes: 1987-89, 2.0 Liter, From Vin 500001
- Other Names: Pulley
- Item Dimensions: 6.5 x 2.3 x 6.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Chevrolet Beretta Pulley Asm-P/S Pump
Vehicle Fitment- 1988 Chevrolet Beretta | Base, Indianapolis 500 Pace Car | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
OEM (Genuine) 1988 Chevrolet Beretta Power Steering Control Valve
PartNumber: 26002343Product Specifications- Notes: Beretta
- Part Description: 1988 Chevrolet Beretta Power Steering Control Valve
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT, GTZ, Indianapolis 500 Pace Car | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
OEM (Genuine) 1988 Chevrolet Beretta Power Steering Cylinder Boot Kit
PartNumber: 26002347Product Specifications- Notes: Beretta, Corsica
- Part Description: 1988 Chevrolet Beretta Power Steering Cylinder Boot Kit
Vehicle Fitment- 1988 Chevrolet Beretta | Base, GT | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
1-30 of 37 Results
< Previous
12
Next >