186 products about 1987 Nissan Stanza A/C & Heating found
Product Specifications- Other Names: Drier
- Item Dimensions: 8.7 x 6.4 x 3.6 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 92131-36A00
- Part Description: 1987 Nissan Stanza Liquid Tank
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$78.45 MSRP: $107.18
You Save: $28.73 (27%)
Limited AvailabilityProduct Specifications- Other Names: Drier
- Item Dimensions: 8.7 x 6.4 x 3.6 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 92131-36A00
- Part Description: 1987 Nissan Stanza Liquid Tank
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$78.45 MSRP: $107.18
You Save: $28.73 (27%)
Limited AvailabilityProduct Specifications- Other Names: Drier
- Item Dimensions: 8.7 x 6.4 x 3.6 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 92131-36A00
- Part Description: 1987 Nissan Stanza Liquid Tank
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$78.45 MSRP: $107.18
You Save: $28.73 (27%)
Limited Availability Product Specifications- Notes: w/o Wheel
- Cage Wheel Included: w/o Wheel
- Connector Gender: None
- Connector qty: None
- Flanged End: Yes
- Material: Metal
- Motor Diameter: 3.250
- Motor Length: 4.3125
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: Connector Not Included
- O.E. Replacement: Yes
- Rotation: CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.8125
- Shaft Shape: Round
- Shaft Type: Round
- Style: Flanged
- Terminal Type: 2 Lead Wires
- UPC: 096361354401
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1987 Nissan Stanza Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 1 Outside Diameter: 15/16
- End 2 Inside Diameter: 5/8
- End 2 Outside Diameter: 15/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 7 3/4
- UPC: 038244598038
- Part Description: 1987 Nissan Stanza Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Core Depth Fraction: 3-1/8; 3-3/4
- Core Depth MM: 79.375; 95.250
- Core Height Fraction: 8; 9-1/4
- Core Height MM: 203.200; 234.950
- Core Width Fraction: 8; 8-7/8
- Core Width MM: 203.200; 225.425
- Depth: 3.125; 3.750
- Height: 8.000; 9.250
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24610] / Green O-Ring
- O-Ring B Quantity: 1
- Outlet Fitting Outside Diameter: No. 10
- UPC: 096361546615
- Width: 8.000; 8.875
- Part Description: 1987 Nissan Stanza A C Evaporator Core
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Color: Brass
- Refrigerant Type: R134A
- Super Heat: 8.0
- UPC: 096361386372
- Part Description: 1987 Nissan Stanza A C Expansion Valve
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 1987 Nissan Stanza Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: Pulsar; W/O Nx;Stanza; W/O Wagon
- Other Names: Dehydrator, Drier
- Item Dimensions: 8.6 x 6.6 x 3.7 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92130-11M00, 92131-04A00, 92131-01A00, 92130-01A00
- Part Description: 1987 Nissan Stanza Liquid Tank
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$78.45 MSRP: $107.18
You Save: $28.73 (27%)
Limited AvailabilityProduct Specifications- Notes: Pulsar; W/O Nx;Stanza; W/O Wagon
- Other Names: Dehydrator, Drier
- Item Dimensions: 8.6 x 6.6 x 3.7 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92130-11M00, 92131-04A00, 92131-01A00, 92130-01A00
- Part Description: 1987 Nissan Stanza Liquid Tank
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$78.45 MSRP: $107.18
You Save: $28.73 (27%)
Limited AvailabilityProduct Specifications- Notes: Pulsar; W/O Nx;Stanza; W/O Wagon
- Other Names: Dehydrator, Drier
- Item Dimensions: 8.6 x 6.6 x 3.7 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92130-11M00, 92131-04A00, 92131-01A00, 92130-01A00
- Part Description: 1987 Nissan Stanza Liquid Tank
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$78.45 MSRP: $107.18
You Save: $28.73 (27%)
Limited Availability Product Specifications- Notes: Cut to fit
- Centerline Length (in): 12"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- OE Part Number: 31305
- UPC: 072053178784
- Part Description: 1987 Nissan Stanza Engine Coolant Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Body Diameter: 2.750
- Body Length: 7.500
- Bracket: w/o Bracket
- Connector B Type: Male Insert O-Ring
- Connector Type: Male Insert O-Ring
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 69.850
- Fuse Plug: No
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Male
- Inlet Filter Fitting Type: Male
- Inlet Fitting Diameter: 0.375
- Inlet Fitting Type: Male Insert O-Ring
- Length MM: 190.500
- Material: Steel
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- New or Reman: New
- O-Ring A Number/Desc: [24607] / Green O-Ring
- O-Ring A Quantity: 2
- O-Ring B Number/Desc: [24606] / Green O-Ring
- O-Ring B Quantity: 2
- Outlet Fitting Type: Male Insert O-Ring
- Outlet IN: 0.375
- Overall Depth IN: 7.500
- P. R. V.: No
- Service Port: w/ Service Port
- Sight Glass: Yes
- Stud: No
- Style: Steel Filter Drier
- Switch Port: w/ Switch Port
- Switch Port Dia. IN: 0.250
- Switch Port Dia.MM: 6.350
- UPC: 096361334540
- Part Description: 1987 Nissan Stanza A C Receiver Drier
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings
- Style: O-Ring & Gasket Kit
- UPC: 096361267473
- Part Description: 1987 Nissan Stanza A C System O Ring And Gasket Kit
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Caps and Valve Core Seal Kit; w/ R12 or R134a Retrofit System
- Cap Color: Red, Blue, Black
- Cap Inside Diameter: Specific
- Cap Material: Plastic
- Material: Aluminum
- Refrigerant Type: R12, R134a
- Style: Cap & Valve Kit
- UPC: 096361267770
- Valve Core Material: Specific
- Part Description: 1987 Nissan Stanza A C System Valve Core And Cap Kit
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: AC System Mounted Low Pressure Cut-Out Switch Connector; Harness Connector-Repair
- Connector Pin Qty: 2
- Connector Shape: Round
- Connector Type: Pin
- Gender: Female
- Printed Foot Note: Pressure Switch Harness Connector
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 2
- UPC: 096361372191
- Part Description: 1987 Nissan Stanza A C Compressor Cut Out Switch Harness Connector
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Low Pressure AC System Mounted;Low Pressure AC System Mounted Cut-Out Switch
- Color: Black; Purple
- Comp Open/Closed: Open
- Connector Gender: Male
- Connector Shape: Open
- Fitting Thread Size: 3/8 in. x 24
- Harness Connector: [37219] / Harness Connector
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System mount; System Mounted
- Number of Terminals: 2
- Operate Psi Low Off: 30
- Operate Psi Low On: 31
- Style: Pressure
- UPC: 096361357587
- Weather Pack: No; Yes
- Part Description: 1987 Nissan Stanza Hvac Pressure Switch
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 5 1/2
- UPC: 038244157853
- Part Description: 1987 Nissan Stanza Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 2 Inside Diameter: 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 038244597512
- Part Description: 1987 Nissan Stanza Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 2 Inside Diameter: 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 4 1/4
- UPC: 038244597628
- Part Description: 1987 Nissan Stanza Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | All Engines
Product Specifications- Body Diameter: 2.500
- Body Length: 7.500
- Bracket: w/o Bracket
- Connector B Type: Male Insert O-Ring
- Connector Type: Male Insert O-Ring
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Fuse Plug: No
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Male
- Inlet Filter Fitting Type: Male
- Inlet Fitting Diameter: 0.5625
- Inlet Fitting Type: Male Insert O-Ring
- Material: Steel
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- New or Reman: New
- O-Ring A Number/Desc: [24606] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24608] / Green O-Ring
- O-Ring B Quantity: 2
- O-Ring C Number/Desc: [24606] / Green O-Ring
- O-Ring C Quantity: 1
- O-Ring D Number/Desc: [24608] / Green O-Ring
- O-Ring D Quantity: 2
- O-Ring E Number/Desc: [24610] / Green O-Ring
- O-Ring E Quantity: 1
- O-Ring F Number/Desc: [24606] / Green O-Ring
- O-Ring F Quantity: 2
- Outlet Fitting Type: Male Insert O-Ring
- Outlet IN: 0.375
- Overall Depth IN: 7.500
- P. R. V.: No
- Service Port: w/o Service Port
- Sight Glass: Yes
- Stud: No
- Style: Steel Filter Drier
- Switch Port: w/ Switch Port
- UPC: 096361334182
- Part Description: 1987 Nissan Stanza A C Receiver Drier
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Centerline Length (in): 19"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053180619
- Part Description: 1987 Nissan Stanza Hvac Heater Molded Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Centerline Length (in): 24"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053180947
- Part Description: 1987 Nissan Stanza Hvac Heater Molded Hose
More Info Vehicle Fitment- 1987 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: Van/Wagon
- Other Names: Evaporator Assembly
- Item Dimensions: 18.7 x 18.4 x 11.1 inches
- Item Weight: 13.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan Stanza Cooling Unit
More Info Vehicle Fitment- 1987 Nissan Stanza | XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Van/Wagon
- Other Names: Evaporator Assembly
- Item Dimensions: 18.7 x 18.4 x 11.1 inches
- Item Weight: 13.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan Stanza Cooling Unit
More Info Vehicle Fitment- 1987 Nissan Stanza | XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Van/Wagon, To 7/88
- Other Names: Compressor, Compressor Assembly
- Item Dimensions: 10.1 x 8.2 x 7.7 inches
- Item Weight: 20.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92600-19M00, 92600-29R05, 92600-29R00
- Part Description: 1987 Nissan Stanza Compressor Cooler
More Info Vehicle Fitment- 1987 Nissan Stanza | XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Sedan Jan 1986 - 89
- Other Names: Compressor
- Item Dimensions: 10.2 x 8.5 x 8.3 inches
- Item Weight: 16.80 Pounds
- Replaces: 92600-D4022, 92600-D4023, 92600-D4025, 92600-D4020
- Part Description: 1987 Nissan Stanza Compressor Cooler
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GXE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Pulsar; Fuel Inj; W/AC;Sentra; W/AC
- Other Names: Fan Motor, Motor
- Item Dimensions: 5.8 x 5.6 x 3.2 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92122-50A00
- Part Description: 1987 Nissan Stanza Motor Assy-Fan
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Van/Wagon
- Other Names: Heater Assembly
- Item Dimensions: 18.0 x 17.3 x 14.0 inches
- Item Weight: 12.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan Stanza Heating Unit-Front
More Info Vehicle Fitment- 1987 Nissan Stanza | XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Maxima
- Item Dimensions: 10.6 x 8.1 x 7.4 inches
- Item Weight: 21.20 Pounds
- Replaces: 92600-38E00, 92600-16E06, 92600-16E08, 92600-16E05, 92600-16E09, 92600-16E07
- Part Description: 1987 Nissan Stanza Compressor
More Info Vehicle Fitment- 1987 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS