11 products about 1987 Land Rover Range Rover Driveline, Axles & 4WD found
Product Specifications- Notes: with 23-1/4" (590 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face
- Greasable: Yes
- Length: 23.25"
- Length (mm): 590
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Remanufactured Driveshaft/ Prop Shaft
More Info Product Specifications- Notes: w/Rover LT230T Transfer Case; 2Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: Driveshaft Center Support Bearing
More Info Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.94
- Length Axis 2: 2.94
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286011007
- Weight (Gross Pounds): 1.0
- Width (Inch): 3.50
- Part Description: Grade Standard U-Joint
More Info Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 2.935"
- UPC: 085311099479
- Part Description: Rear U Joint
More Info Product Specifications- Cone ID: 1.7812"
- Cone Length: 0.7812"
- Cone Radius: 0.1400"
- Cup Length: 0.5937"
- Cup Radius: 0.0300"
- Outer Diameter: 3.0625"
- UPC: 085311068840
- Width: 0.7812"
- Part Description: Rear Differential Bearing
More Info Product Specifications- Cup Length: 0.593"
- Cup Radius: 0.030"
- Outside Diameter: 3.063"
- UPC: 085311057219
- Width: 0.781"
- Part Description: Rear Axle Shaft Bearing Race
More Info Product Specifications- Cone ID: 1.5"
- Cone Length: 1.01"
- Cone Radius: 0.14"
- UPC: 085311051521
- Width: 0.937"
- Part Description: Rear Axle Shaft Bearing
More Info Product Specifications- Notes: Centric Premium Oil & Grease Seal
- UPC: 805890720935
- Part Description: Premium™ Axle Shaft Seal
More Info Product Specifications- Notes: FAG Global# 401089
- Bearing Inside Diameter: 1.781; 45.242
- Length: 0.781; 19.842
- UPC: 670774290602
- Part Description: Differential Bearing
More Info Product Specifications- Notes: w/Salisbury 8HS Axle; w/8.589in Ring Gear;w/Salisbury 8HA Axle; w/8.589in Ring Gear
- Part Description: Differential Bearing Race
Product Specifications- Notes: w/Salisbury 8HA Axle; w/8.589in Ring Gear;w/Salisbury 8HS Axle; w/8.589in Ring Gear
- Part Description: Differential Pinion Bearing