< Back ×
My Vehicle Change Vehicle
1987 Chevrolet S10 Blazer
OEM (Genuine) 1987 Chevrolet S10 Blazer Housing Seal Kit
PartNumber: 15825938
Product Specifications- Notes: S-Series; 2.8l
- Item Dimensions: 7.6 x 6.0 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26010282, 7848522, 7848088, 07848088, 07848522, 26046717, 26042428, 26072704
- Part Description: 1987 Chevrolet S10 Blazer Housing Seal Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$42.17 MSRP:$69.80You Save: $27.63 (40%)OEM (Genuine) 1987 Chevrolet S10 Blazer Housing Seal Kit
PartNumber: 15825938Product Specifications- Notes: S-Series; 2.8l
- Item Dimensions: 7.6 x 6.0 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26010282, 7848522, 7848088, 07848088, 07848522, 26046717, 26042428, 26072704
- Part Description: 1987 Chevrolet S10 Blazer Housing Seal Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$42.17 MSRP:$69.80You Save: $27.63 (40%)
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 1987 Chevrolet S10 Blazer
PartNumber: 20-874Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 1987 Chevrolet S10 Blazer Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 4 Cyl 2.5L
$44.90
National® Power Steering Pump Shaft Bearing for 1987 Chevrolet S10 Blazer
PartNumber: 203-FFProduct Specifications- Notes: with Integral Reservoir;Two Seal Design; w/AC-Delco Alternator; w/56, 66, 78 Amp Alternator
- Bore: 0.669"
- Inner Race Bore: 0.669"
- Inner Race Outside Diameter: 5.512"
- Inner Race Radius: 0.024"
- Inner Race Width: 0.472"
- Outer Race Outside Diameter: 1.575"
- Outer Race Radius: 0.024"
- Outer Race Width: 0.472"
- Outside Diameter: 1.575"
- Width Belt: 0.472"
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Shaft Bearing
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | All Engines
$7.88
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 1987 Chevrolet S10 Blazer
PartNumber: 20-7826Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;without Aftermarket Filtration Improvement;In-Line filter available;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 1987 Chevrolet S10 Blazer Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 6 Cyl 2.8L
$46.81
OEM (Genuine) 1987 Chevrolet S10 Blazer Power Steering Pump Seal Kit
PartNumber: 7840566
Product Specifications- Notes: S-Series; 2.5l
- Other Names: Power Steering Pump Seal Kit
- Item Dimensions: 6.1 x 3.1 x 0.2 inches
- Item Weight: 0.40 Pounds
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Seal Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 2.5 L GAS
$14.76 MSRP:$22.25You Save: $7.49 (34%)OEM (Genuine) 1987 Chevrolet S10 Blazer Power Steering Pump Seal Kit
PartNumber: 7840566Product Specifications- Notes: S-Series; 2.5l
- Other Names: Power Steering Pump Seal Kit
- Item Dimensions: 6.1 x 3.1 x 0.2 inches
- Item Weight: 0.40 Pounds
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Seal Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 2.5 L GAS
$14.76 MSRP:$22.25You Save: $7.49 (34%)
Cardone Reman® Power Steering Filter for 1987 Chevrolet S10 Blazer
PartNumber: 20-0012FProduct Specifications- Notes: Our Magnetic In-Line Filter measures 2 1/4" X 5" w/12 mm Outer Dia Neck (Designed For Use w/1/2" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 1/2"
- Housing Material: Aluminum
- Inlet Diameter: 0.527"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.527"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617974172
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Filter
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1987 Chevrolet S10 Blazer
PartNumber: 20-0038FProduct Specifications- Notes: with Aluminum Housing;Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.395"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.397"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617953122
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Filter
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | All Engines
$20.45Cardone Reman® Power Steering Filter for 1987 Chevrolet S10 Blazer
PartNumber: 20-0058FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/5/8" Outer Dia Neck (For 5/8" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 5/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.651"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.654"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 884548041394
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Filter
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1987 Chevrolet S10 Blazer
PartNumber: 20-P038FProduct Specifications- Notes: with Plastic Housing;Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Plastic
- Inlet Diameter: 0.406"
- Installation Hardware Included: Hose Clamps (2), O-Ring
- Outlet Diameter: 0.415"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps, O-Ring
- Product Condition: New
- UPC: 884548053915
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Filter
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | All Engines
$15.50
SKF® Power Steering Pump Shaft Seal for 1987 Chevrolet S10 Blazer
PartNumber: 7475Product Specifications- Attribute: CRWA1
- Bore: 1.312"
- Metal: cased with sealant coating on the outside diameter
- Nitrile rubber: NBR
- Outlet Diameter: 1.316"
- Shaft: 0.75"
- UPC: 085311005708
- Width: 0.25"
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Shaft Seal
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 6 Cyl 2.8L
$10.86
Gates® Power Steering Gear Complete Rebuilding Kit for 1987 Chevrolet S10 Blazer
PartNumber: 350430Product Specifications- Quantity: Sold as a Kit
- UPC: 072053419276
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Gear Complete Rebuilding Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 6 Cyl 2.8L
- 1987 Chevrolet S10 Blazer | All Trims | 4 Cyl 2.5L
Gates® Power Steering Pump Seal Kit for 1987 Chevrolet S10 Blazer
PartNumber: 351780Product Specifications- UPC: 072053420463
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Seal Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 4 Cyl 2.5L
Gates® Power Steering Pump Seal Kit for 1987 Chevrolet S10 Blazer
PartNumber: 351160Product Specifications- UPC: 072053419894
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Seal Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 6 Cyl 2.8L
Gates® Power Steering Pump Shaft Seal for 1987 Chevrolet S10 Blazer
PartNumber: 348720Product Specifications- UPC: 072053417906
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Shaft Seal
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 6 Cyl 2.8L
Gates® Power Steering Pump Shaft Seal for 1987 Chevrolet S10 Blazer
PartNumber: 348750Product Specifications- UPC: 072053417937
- Part Description: 1987 Chevrolet S10 Blazer Power Steering Pump Shaft Seal
Vehicle Fitment- 1987 Chevrolet S10 Blazer | All Trims | 4 Cyl 2.5L
OEM (Genuine) 1987 Chevrolet S10 Blazer Valve Asm, Steering Gear
PartNumber: 26056747
Product Specifications- Notes: 2WD, Manual Steering;2WD, Power Steering;4WD, Manual Steering;4WD, Power Steering
- Item Dimensions: 6.5 x 4.2 x 4.1 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 7832057, 26056753, 07832057
- Part Description: 1987 Chevrolet S10 Blazer Valve Asm, Steering Gear
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Pump Asm-P/S
PartNumber: 26002177
Product Specifications- Notes: 2WD, 2.8;4WD, 2.8; 2WD, 2.8;4WD, 2.8;S-Series; 2.8l
- Other Names: Power Steering Pump
- Item Dimensions: 7.3 x 7.3 x 11.9 inches
- Item Weight: 10.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Pump Asm-P/S
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Pump Asm/P/S
PartNumber: 26048280
Product Specifications- Notes: 2WD, 2.5;4WD, 2.5; 2WD, 2.5;4WD, 2.5;S-Series; 2.5l
- Other Names: Power Steering Pump
- Item Dimensions: 5.3 x 5.1 x 7.9 inches
- Item Weight: 4.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 7843045, 07843045
- Part Description: 1987 Chevrolet S10 Blazer Pump Asm/P/S
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Steering Column Upper Shaft Assembly (W/Race)
PartNumber: 7828404
Product Specifications- Notes: W/Tilt Wheel, Upper
- Item Dimensions: 6.3 x 5.0 x 5.0 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Steering Column Upper Shaft Assembly (W/Race)
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Reservoir Kit-Hydraulic Pump
PartNumber: 26019668
Product Specifications- Notes: 2WD, 4.3
- Other Names: Reservoir, Reservoir Tank
- Item Dimensions: 8.8 x 7.0 x 7.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Reservoir Kit-Hydraulic Pump
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Lower Intermediate Steering Shaft Assembly Kit
PartNumber: 7830094Product Specifications- Notes: W/Tilt Wheel, Intermediate Assy, Lower
- Other Names: Intermed Shaft, Seal Kit, Shaft, Shaft Assembly
- Item Dimensions: 12.4 x 4.1 x 4.0 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Lower Intermediate Steering Shaft Assembly Kit
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Reservoir Kit-Hydraulic Steering Pump
PartNumber: 7837332Product Specifications- Notes: 2WD, 2.8;4WD, 2.8
- Other Names: Reservoir
- Item Dimensions: 8.7 x 6.8 x 7.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Reservoir Kit-Hydraulic Steering Pump
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Pipe-P/S Fluid Cooling
PartNumber: 14078609Product Specifications- Notes: 2WD;4WD
- Other Names: Power Steering Cooler
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Pipe-P/S Fluid Cooling
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Pipe Asm-P/S Gear Outlet
PartNumber: 22514738
Product Specifications- Notes: 2WD, 4.3;4WD, 4.3
- Item Dimensions: 3.1 x 1.5 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Pipe Asm-P/S Gear Outlet
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1987 Chevrolet S10 Blazer Reservoir Asm-P/S Fluid
PartNumber: 15595981Product Specifications- Notes: 2WD, 2.5;4WD, 2.5
- Other Names: Reservoir
- Item Dimensions: 9.1 x 8.8 x 4.8 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Chevrolet S10 Blazer Reservoir Asm-P/S Fluid
Vehicle Fitment- 1987 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS