78 products about 1986 Nissan Stanza Ignition, Distributors & ECM found
Product Specifications- Notes: Stanza; W/Wagon
- Other Names: Ignition Switch
- Item Dimensions: 2.0 x 1.5 x 1.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 48750-D4000
- Part Description: 1986 Nissan Stanza Switch-Ignition
More Info Vehicle Fitment- 1986 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$40.56 MSRP: $55.42
You Save: $14.86 (27%)
Product Specifications- Coil Type: Conventional
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 689604213711
- Part Description: 1986 Nissan Stanza Ignition Coil
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: Stanza; W/O Wagon; Van/Wagon
- Other Names: Rotor
- Item Dimensions: 3.8 x 2.7 x 2.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22157-07F90, 22157-W4502, 22157-06W03, 22157-80W00
- Part Description: 1986 Nissan Stanza Rotor Dist
More Info Vehicle Fitment- 1986 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$15.10 MSRP: $20.62
You Save: $5.52 (27%)
Product Specifications- Notes: Hitachi Coil
- Connector Gender: Female
- Ignition Type: Electronic
- Oil Filled: No
- Requires External Resistor: No
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Spade
- UPC: 724620078439
- Voltage: 12 Volts
- Part Description: 1986 Nissan Stanza Ignition Coil
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- UPC: 724620097867
- Part Description: 1986 Nissan Stanza Ignition Distributor Rotor
Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Other Names: Distributor
- Item Dimensions: 10.0 x 7.1 x 5.8 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 22100-27M05RE
- Part Description: 1986 Nissan Stanza Distributor Assy
More Info Vehicle Fitment- 1986 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$286.69 MSRP: $385.25
You Save: $98.56 (26%)
Limited AvailabilityProduct Specifications- Notes: Automatic Trans W/Fuel Injection, Automatic Trans W/Fuel Injection
- Item Dimensions: 11.6 x 8.2 x 7.0 inches
- Item Weight: 3.40 Pounds
- Replaces: 22100-D3301, 22100-D3306, 22100-D3302, 22100-D3307, 22100-D3360, 22100-D3303, 22100-D3304
- Part Description: 1986 Nissan Stanza REMAN Distributor Assembly
More Info Vehicle Fitment- 1986 Nissan Stanza | GL, XE | 4 Cyl 2.0 L GAS
$268.39 MSRP: $360.66
You Save: $92.27 (26%)
Product Specifications- Notes: Stanza; Carb
- Other Names: Ignition Coil
- Item Dimensions: 5.6 x 4.2 x 3.6 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 22448-D4513
- Part Description: 1986 Nissan Stanza Ignition Coil Assembly
More Info Vehicle Fitment- 1986 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$101.85 MSRP: $139.15
You Save: $37.30 (27%)
Limited Availability Product Specifications- Notes: Before 01/1986;Electronic Distributor;I.D. #(s) 22100-D3315;with Mitsubishi Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Magnetic Coil
- Electronic Module Supplied: Yes
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Number of Distributor Pickups: 1
- Part Description: 1986 Nissan Stanza Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: I.D. #(s) 22100-D3500;Electronic Distributor;From 01/1986 to 03/1986;with Hitachi Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Optical
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1986 Nissan Stanza Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: Maxima
- Item Dimensions: 2.8 x 1.8 x 1.8 inches
- Item Weight: 0.60 Pounds
- Replaces: 22157-03P02, 22157-03P01, 22157-03P00
- Part Description: 1986 Nissan Stanza Rotor Head
More Info Vehicle Fitment- 1986 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS
$15.42 MSRP: $21.05
You Save: $5.63 (27%)
Product Specifications- Notes: I.D. #(s) 22100-D3510;with Mitsubishi Distributor;I.D. #(s) 22100-D3511;From 04/1986;Electronic Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Optical
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1986 Nissan Stanza Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: I.D. #(s) 22100-D3512;Electronic Distributor;From 04/1986;with Mitsubishi Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Optical
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1986 Nissan Stanza Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;with California Emission System
- Connector/Terminal Configuration: Pin/Male; Blade/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 20, 10
- Part Description: 1986 Nissan Stanza Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: without California Emission System;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Blade/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 20, 10
- Part Description: 1986 Nissan Stanza Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Stanza; W/Wagon
- Other Names: Rotor
- Item Dimensions: 2.8 x 2.0 x 1.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1986 Nissan Stanza Rotor Head
More Info Vehicle Fitment- 1986 Nissan Stanza | E, GL, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: without California Emission System;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Blade/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 20, 10
- Part Description: 1986 Nissan Stanza Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;without California Emission System
- Connector/Terminal Configuration: Pin/Male; Blade/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 20, 10
- Part Description: 1986 Nissan Stanza Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | All Engines
Product Specifications- Finish: Black
- Housing Material: Metal
- Installation Hardware Included: No
- Key Programmable: No
- Key Quantity: 2
- Lock Material: Metal
- Mounting Hardware Included: No
- UPC: 885484692138
- Wiring Harness Included: No
- Part Description: 1986 Nissan Stanza Ignition Lock Cylinder
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Hitachi
- Part Description: 1986 Nissan Stanza Ignition Distributor Rotor
Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Part Description: 1986 Nissan Stanza Ignition Coil
Vehicle Fitment- 1986 Nissan Stanza | XE | All Engines
Product Specifications- Notes: Stanza; W/O Wagon; Manual Trans; Federal;Stanza; W/Wagon; Manual Trans; Federal
- Other Names: ECM
- Item Dimensions: 10.3 x 8.6 x 2.2 inches
- Item Weight: 2.40 Pounds
- Replaces: 22611-29R00, 2261A-D2100RE, 22611-D2101, 2261A-D2101RE, 22611-D2100, B2611-D2100R
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | GL, XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Stanza; W/O Wagon; Auto Trans; Federal;Stanza; W/Wagon; Auto Trans; Federal
- Other Names: ECM
- Item Dimensions: 10.5 x 8.7 x 2.3 inches
- Item Weight: 2.50 Pounds
- Replaces: 22611-29R10
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | GL, XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Stanza; W/Wagon; Manual Trans; California
- Other Names: ECM
- Item Dimensions: 10.2 x 9.0 x 2.3 inches
- Item Weight: 3.20 Pounds
- Replaces: 22611-29R60
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Stanza; W/Wagon; Auto Trans; California
- Other Names: ECM
- Item Dimensions: 10.1 x 8.9 x 2.1 inches
- Item Weight: 2.70 Pounds
- Replaces: 22611-29R70
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Stanza; W/O Wagon; Manual Trans; California
- Other Names: ECM
- Item Dimensions: 10.0 x 8.6 x 2.2 inches
- Item Weight: 2.20 Pounds
- Replaces: 22611-D2200, 2261A-D2201RE, 22611-D2201, 2261A-D2200RE, 22611-D2202
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | GL, XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Stanza; W/O Wagon; Auto Trans; California
- Other Names: ECM
- Item Dimensions: 10.2 x 8.5 x 2.1 inches
- Item Weight: 2.60 Pounds
- Replaces: 2261A-D2210RE, 22611-D2210, 22611-D2211
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | GL, XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Pulsar; Carb; Manual Trans; California;Sentra; Manual Trans; California
- Other Names: ECM
- Item Dimensions: 13.1 x 9.2 x 3.9 inches
- Item Weight: 2.50 Pounds
- Replaces: 2371M-31M00RE, 23710-31M01, 23710-31M00
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | GL, XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Electronic Distributor;I.D. #(s) 22100-D3303;with Hitachi Distributor;Before 01/1986
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Magnetic Coil
- Electronic Module Supplied: Yes
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Number of Distributor Pickups: 1
- Part Description: 1986 Nissan Stanza Remanufactured Electronic Ignition Distributor
More Info Vehicle Fitment- 1986 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: Maxima; Manual Trans; Federal
- Other Names: Control Module, ECM
- Item Dimensions: 9.9 x 8.9 x 2.4 inches
- Item Weight: 2.60 Pounds
- Replaces: 23710-16E04, 23710-16E01, 2371M-16E01RE
- Part Description: 1986 Nissan Stanza Reman Engine Control Module
More Info Vehicle Fitment- 1986 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS