29 products about 1986 Dodge Charger Ignition, Distributors & ECM found
Product Specifications- Notes: Chrome
- Finish: Silver
- Housing Material: Metal
- Installation Hardware Included: No
- Key Programmable: No
- Key Quantity: 2
- Lock Material: Metal
- Mounting Hardware Included: No
- UPC: 885484688933
- Wiring Harness Included: No Harness Required
- Part Description: 1986 Dodge Charger Ignition Lock Cylinder
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | All Engines
Product Specifications- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Round
- Length: 46.34 mm
- Mounting Hardware Included: No
- Terminal Gender: Male
- Terminal Quantity: 1
- Terminal Type: Threaded
- Threaded End Diameter: 9.5 mm
- UPC: 724620074493
- Wiring Harness Included: No
- Part Description: 1986 Dodge Charger Ignition Knock Sensor
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 1.6L
- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: with OE # 5226766, 5227808;Power Module;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 10, 12
- Part Description: 1986 Dodge Charger Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Connector Gender: Female
- Ignition Type: Standard
- Mounting Bracket Included: No
- Oil Filled: Yes
- Requires External Resistor: Yes
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Threaded
- UPC: 724620078163
- Voltage: 12 Volts
- Part Description: 1986 Dodge Charger Ignition Coil
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 1.6L
- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: with OE # 5226433, 5226451;Spark Control;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 10, 12
- Part Description: 1986 Dodge Charger Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- UPC: 724620114700
- Part Description: 1986 Dodge Charger Ignition Distributor Cap
Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: Electronic Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Hall Effect
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1986 Dodge Charger Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- UPC: 724620097607
- Part Description: 1986 Dodge Charger Ignition Distributor Rotor
Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 1.6L
- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;with OE # 5227255, 5227538, 5227933;Logic Module
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 25, 25
- Part Description: 1986 Dodge Charger Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: Electronic Distributor
- Coil Wire: No
- Color: Gray
- Cylinders: 4
- Distributor Cap: No
- Distributor Type: Hall Effect
- Electronic Module Supplied: No
- Ignition Rotor: No
- Integrated Ignition Coil: No
- Part Description: 1986 Dodge Charger Remanufactured Electronic Distributor
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;with OE # 5226439;Spark Control
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 10, 12
- Part Description: 1986 Dodge Charger Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: All Models
- Other Names: Coil, Ignition Coil
- Item Dimensions: 9.7 x 5.1 x 3.3 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1986 Dodge Charger Ignition Coil Replacement
More Info Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Notes: All Models
- Other Names: Distributor Cap
- Item Weight: 0.60 Pounds
- Part Description: 1986 Dodge Charger Distributor
More Info Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Contents: Distributor Rotor
- UPC: 841266020964
- Part Description: 1986 Dodge Charger Ignition Distributor Rotor
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | All Engines
Product Specifications- Location: Driver Side; Passenger Side
- Part Description: 1986 Dodge Charger Ignition Lock Cylinder
Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Notes: Supplied w/Cap & Rotor
- UPC: 627785017568
- Part Description: 1986 Dodge Charger Distributor
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Attachment Method: Screw
- Contact Terminal Material: Aluminum
- Contents: Distributer Cap
- Distributor Cap Color: Black
- Distributor Cap Material: Polypropylene
- Distributor Vent: Yes
- Gasket or Seal Included: No
- Ignition Rotor Included: No
- Instructions Included: No
- Mount Type: Screw
- Screws included: Yes
- Spark Plug Wires Included: No
- Terminal Quantity: 5
- Tower Position: Top
- UPC: 841266031250
- Part Description: 1986 Dodge Charger Ignition Distributor Cap
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 1.6L
Product Specifications- Item Dimensions: 4.4 x 3.1 x 2.0 inches
- Item Weight: 0.40 Pounds
- Part Description: 1986 Dodge Charger Rotor-Distributor
More Info Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Contents: Distributer Cap
- Distributor Vent: Yes
- UPC: 841266026713
- Part Description: 1986 Dodge Charger Ignition Distributor Cap
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Other Names: Distributor Cap
- Item Dimensions: 4.4 x 4.3 x 3.5 inches
- Item Weight: 0.60 Pounds
- Part Description: 1986 Dodge Charger CAP/DIST-Distributor
More Info Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Attachment Method: Bolt-On
- Color: Blue
- Connector Gender: Female (1)
- Connector Quantity: 1
- Mounting Bracket Included: No
- Mounting Location: External
- Oil Filled: Yes
- Terminal Gender: Male (1)
- Terminal Quantity: 2
- Terminal Type: Stud
- UPC: 841266012297
- Voltage: 12 Volts
- Part Description: 1986 Dodge Charger Ignition Coil
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | All Engines
Product Specifications- Part Description: 1986 Dodge Charger Ignition Lock Cylinder
Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Notes: All Models
- Part Description: 1986 Dodge Charger Ignition Switch
Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Notes: with OE # 5226645, 5227626;First Source - Call For Availability;Spark Control;This Unit is Pre-Programmed at the Factory
- E-Waste: Yes
- Flashable: No
- Mounting Hardware Included: No
- Product Condition: Remanufactured
- Removable PROM: No
- UPC: 082617320856
- Part Description: 1986 Dodge Charger Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1986 Dodge Charger | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: 2.2 Liter; W/Turbo
- Part Description: 1986 Dodge Charger Distributor
Vehicle Fitment- 1986 Dodge Charger | 2.2, Shelby | 4 Cyl 2.2 L GAS
Product Specifications- Notes: 1.6 Liter
- Part Description: 1986 Dodge Charger Distributor
Vehicle Fitment- 1986 Dodge Charger | Base | 4 Cyl 1.6 L GAS
Product Specifications- Notes: All Models
- Part Description: 1986 Dodge Charger Distributor Rotor
Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
Product Specifications- Notes: 2.2 Liter; W/O Turbo; 2.2 Liter
- Other Names: Distributor Assembly
- Item Dimensions: 12.2 x 8.4 x 6.8 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: R0212146
- Part Description: 1986 Dodge Charger Dist Assembly-Single Switch TBI
More Info Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 2.2 L GAS
Product Specifications- Notes: 2.2 Liter, Turbo
- Part Description: 1986 Dodge Charger Distributor
Vehicle Fitment- 1986 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 2.2 L GAS